• Proceedings of the KIEE Conference
• /
• 2004.07e
• /
• pp.120-122
• /
• 2004

This paper describes the digital relay simulator by use of DSP for digital relay test. The simulator software has EMTP simulation data file conversion. user define simulation data generation. data analysis engine. etc. The simulator hardware design uses 32bit floating point DSP architecture to achivev flexibility and high speed operation.

• Journal of IKEEE
• /
• v.19 no.1
• /
• pp.80-86
• /
• 2015

There are many studies and products using a test paper impregnated with chemical solution can react with ozone. The color of a test paper can indicate the concentration of ozone. The purpose of this research is to design and manufacture a system using ultraviolet light source to measure the ozone density. This new technique is based on the characteristic of decomposition from ozone into oxygen under ultraviolet light. We used two sources of ultraviolet light including UV lamp and UVLED to determine the decomposition of ozone. This system is built with the electronic components, sensors and sealed pump tube to measure the ozone density in units of $g/cm^3$,ppm,ppb. In this paper,, we present some initial results of measuring the ozone density from ozone generator after completing inspection for safety.

• Parasites, Hosts and Diseases
• /
• v.47 no.4
• /
• pp.427-429
• /
• 2009

To establish a definite diagnosis for pulmonary hydatid disease, combination of radiology and serology is useful. In this study, 19 preoperative sera from patients with surgically confirmed pulmonary hydatidosis, 40 sera from patients with other parasitosis and pulmonary diseases, and 20 sera from healthy donors were evaluated using 4 different serological tests, i.e., the commercial ELISA (ELISA-kit) test, the ELISA (ELISA-lab) test prepared in our laboratory, the commercial indirect hemagglutination assay kit (IHA-kit) test, and the IHA test using sensitized sheep red blood cells with tannic acid (IHA-TA). The ELISA-kit was the most sensitive (84.2%) and the most specific test (100.0%). The ELISA-kit also demonstrated the highest positive (100.0%) and negative (95.2%) predictive values. The sensitivity of the ELISA-lab test, that we prepared, was found to be 73.6%, whereas the IHA-kit test and the IHA-TA test were found to be 73.6% and 68.4%, respectively. The specificity of these tests was 96.6%, 98.3%, and 83.3%, respectively. When all 4 tests were assessed together, it was found that the sensitivity had risen to 94.7%. When the ELISA-kit was assessed with the IHA-kit and IHA-TA together, it was found that the sensitivity was 89.5% and 84.2%, respectively. Likewise, the combination of the ELISA-lab and IHA-kit or IHA-TA allowed us to achieve a sensitivity of 84.2% in cases of pulmonary echinococcosis. In conclusion, the diagnosis would be imminent if least 2 tests were applied together.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.4
• /
• pp.752-757
• /
• 2008

In this paper, studied Measuring Equipment for Brake Test provided to test a braking distance and stability on various conditions while at stop/drive. It ensures an objectivity, repeatability and reproducibility for a brake test, which may be applied to various types of braking distance and stability tests anywhere in the world. With Measuring S/W for Brake Test mounted on the vehicle while at stop/drive, braking distance and stability were examined under conditions specified of NCAP and vehicle manufactures A and B's own test, which was available under all conditions and even harder ones to confirm this measuring S/W for brake test be applicable for any changed conditions for the future.

• Proceedings of the SAREK Conference
• /
• 2004.06a
• /
• pp.137-137
• /
• 2004

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.5
• /
• pp.92-98
• /
• 2003

A wind turbine monitoring system is essential equipment fur the performance evaluation and mechanical load analysis of a wind turbine. A monitoring system using LabVIEW is developed in this study. This system monitors signals from a meteorological mast, wind turbine generator, and tower. The discrete signals which are sampled at t Hz are automatically saved on a data file in the unit of a day. Besides these basic functions, the developed monitoring system has the other several capabilities. One of them is the information access from a remote PC through the internet. A vision image of the test site area and data files that are produced by LabVIBW software can be uploaded to the main computer located in a remote site. An emergency backup system using UPS fur the power loss on the monitoring HW is also prepared, A detail explanation for the developed wind turbine monitoring system is presented in this study.

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.540-542
• /
• 1999

We propose the digital range tracking algorithm for a tracking radar. The proposed digital range tracker are designed and implemented. Simulation results are presented for demonstrating the performance of the proposed range tracker. According to our field test results, the implemented digital range tracker performs well even in the real environments.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.290-295
• /
• 1992

Tendon driven method to drive one joint using two actuators is developed and implemented. While the method has advantages over conventional transmissions, it also has several drawbacks like tendon slack, elongation and endurability. In this paper, a compensation method of the intrinsic non-linearities of tendon is proposed to improve the performance of antagonistic tendon driven method. In this method, tendon tension measurement is prerequisite which is measured with strain gauge type tension sensor. The developed method is implemented on one link test bed with colocated and non-colocated position sensor.

• Journal of Biosystems Engineering
• /
• v.28 no.6
• /
• pp.531-536
• /
• 2003

This study was carried out to develop a vacuum nozzle seeder for large seeds and performance was tested on seed feeding, arranging. and sowing peformance. The results of this study were as follows： The operation of feeding device of the seeder was programmed to operate a period of setting time after sowing 6 rows. The setting time was decided based on a discharged seed by the angular speed of feeding roller. The arranging accuracy of 'tuktozwa', 'hukjong' and 'chambak' was 96.4％, 95.2％ and 89.4％ respectively. The working performance was 75.6sheet/hr which was 3.8 times higher than that of manual work. An average seeding rate of 1 grain was 97.8％.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11b
• /
• pp.337-339
• /
• 2005

본 논문에서는 임베디드 시스템의 제어를 위해 동기화 언어인 에스테렐로 개발된 소프트웨어가 소프트웨어 요구사항을 만족하는지 확인하기 위한 Model-based Test(MBT) 프레임 워크를 제안한다. 제안된 프레임 워크를 기반으로 작성한 프로토 타입의 테스트 도구는 요구사항 모델을 창조하여 On-the-fly 방법을 통해 테스트 케이스를 랜덤하게 자동으로 생성하여 소프트웨어에 대하 테스트를 자동으로 수행한다. 간단한 case study로 레고 마인드스톰 로봇 제어 소프트웨어에 MBT를 수행하고 그 결과를 확인한다.