• 시스템엔지니어링학술지
• /
• 제6권1호
• /
• pp.25-32
• /
• 2010

The Test and Evaluation (T&E) process is an integral part of the Systems Engineering Process. The purpose of Test and Evaluation (T&E) in a system development is to identify the areas of risk to be reduced or eliminated. In this study, when develop aircraft of Civil Aviation with development experience of Military Aircraft, it is that establish Test and Evaluation process. Test and Evaluation for KC-100 small aircraft development can divide to certification test and development test. Certification test is proved compliance about Korea Airworthiness standard (KAS Part 23), through Development Test verify required performance of aircraft. These Test and Evaluation Process is more efficient and optimized.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제14권2호
• /
• pp.114-121
• /
• 2014

An environmental test has been performed in order to improve the lifetime and reliability of the electrical units on aircraft. However, faults occurring in the field of aircraft have been difficult to predict and prevent, and new concepts for reliability testing are desired. Therefore, a composite reliability test sequence was proposed in the conventional studies. This study introduces test sequence guidelines based on relevant principles and considerations for electronic testing according to International Standard IEC-60068-1 and the United States Military Standard MIL-STD-810G. In addition, we analyze possible causes of failure using two-step QFD based on aircraft operation scenarios. Finally, the proposed test sequence can reproduce various and realistic failure modes for electrical units on aircraft.

• 항공우주산업기술동향
• /
• 제6권2호
• /
• pp.154-160
• /
• 2008

항공기의 개발에 있어 비행시험은 통상적으로 크게 민간용과 군용의 두 분류로 나눌 수 있다. 민간용 항공기의 비행시험은 해당 정부의 감항당국에서 제시하는 안전/성능 요구도를 항공기가 충족하는지 여부를 개발자가 확인하는 것이다. 이에 반해 군용항공기의 비행시험은 소요제기를 한 해당 정부의 요구도를 항공 기기가 충족하는지 여부를 개발자의 사전점검(DT: Developmental Test) 이후에 정부의 독립적인 평가팀에 의해 Operational Test(OT)가 수행되어 최종적으로 확인하는 과정으로 진행된다. 이 논문에서는 민수용 항공기와 군용항공기 각각의 목적상 추진되던 인증업무가 비용의 효율성 제고, 민간항공기의 군용화 추세에 따라 민간항공기 인증방안을 사용해 군용항공기의 감항인증을 추진하는 선진국의 최신동향을 살펴보고 국내의 여건 및 향후 발전발향을 제시하고자 한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.718-723
• /
• 2003

The number of jet aircraft is increasing. The aircraft noise making people near airports nervous have become a serious social problem. The aircraft noise can be classified into two groups; noise being generated at take-off or landing and noise form run-up test on the ground. In this paper, we consider the aircraft noise from run-up test on the pound and we suggest the noise suppression system.

• 한국항공운항학회지
• /
• 제13권3호
• /
• pp.97-109
• /
• 2005

A canard type aircraft, which has good wing stall and stall/spin-proof characteristics, is under development. The aircraft prototype has full-depth core sandwich type wing and fixed landing gear, and has been built for test flights. Newly developing aircraft will be equipped with retractable landing gear and conventional foam core sandwich laminate structures and multi-rib wings. In this study, we present the structural test procedure and result for aircraft Firefly.

• 한국군사과학기술학회지
• /
• 제25권3호
• /
• pp.311-320
• /
• 2022

In this paper, we studied the optimal method of improving performance for aircraft having various variants within the same type. The study defined configuration of an entire fleet of aircraft being subject to a performance improvement program. And selected the most complicated aircraft configuration among them as a Standard Aircraft for modification by according to the proposed Aircraft Selection Process for developing an optimal Aircraft Performance Improvement Process. Based on the selected the Standard Aircraft, drew a system integration design result and carried out Evaluation Test and obtained Airworthiness Certification. Created the database with the design data of the Standard Aircraft, Evaluation Test, and Airworthiness Certification results, and applied it to variants of aircraft to complete the performance improvement program with optimized schedules and costs. By applying the proposed method to IFF performance improvement program, drew optimal system integration design and completed the program with minimized schedule.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1655-1658
• /
• 1997

To obtain aircraft dynamic parameters, various estimation methods such as Maximum Likelihood, Linear Regression are applied. In this paper we adopt the extended Kalman filter(EKF) to estimate the stability and control derivatives in aircraft dynamic models from flight test data. The extended Kalman filter is applied to nonlinear augmented system assuming that unknown parameters are additional states. In this work, the results of the extended Kalman filter are compared with the results of the wind tunnel test using Chang Gong-91 aircraft flight test data.

• 항공우주시스템공학회지
• /
• 제6권3호
• /
• pp.13-18
• /
• 2012

Every 3000 hour an aircraft is stricken by a lightning. Also the lightning damage to the aircraft during flight are continually occurred due to extreme weather phenomena such as global warming. Under the airworthiness standards, the aircraft must be designed to protect lightning. To show compliance for lightning, the test should be conducted by the actual lightning current and voltage waveform for the actual aircraft or parts. After test, structure damage is detected via visual inspection or NDI. Structure substantiation for damage is to show retaining limit or near limit load capability. This is conducted by test or analysis based on test. Thus, the aircraft should retain structural strength to land safely, even though the damage of aircraft fuselage from Lightning strike are occurred.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권3호
• /
• pp.425-436
• /
• 2015

This paper presents the procedures used for estimating the stability and control derivatives of a general aviation canard aircraft from flight data. The maximum likelihood estimation method which accounts for both process and measurement noise was used for the flight data analysis of a four seat canard aircraft, the Firefly. Without relying on the parameter estimation method, several aerodynamic derivatives were obtained by analyzing the steady state flight data. A wind tunnel test, a flight test of a 1/4 scaled remotely controlled model aircraft, and the prediction of aerodynamic coefficients using the USAF Stability and Control Digital Data Compendium (DATCOM), Advanced Aircraft Analysis (AAA), and Computer Fluid Dynamics (CFD) were performed during the development phase of the Firefly and the results were compared with flight determined derivatives of a full scaled flight prototype. A correlation between the results from each method could be used for the design of the canard aircraft as well as for building the aerodynamic database.

• 항공우주기술
• /
• 제10권2호
• /
• pp.146-153
• /
• 2011

복합재 항공기의 설계하중 데이터로부터 전기체 구조시험 중에 하중부가용 스트랩에 부가될 시험하중의 크기를 산출하는 몇 가지 방법에 대하여 비교 분석하였다. 이 방법들을 KC-100 복합재 항공기 좌측 주익의 시험하중 산출과정에 적용해보고 산출된 결과의 특성 및 차이를 분석하였다. 항공기 전기체 구조시험에 부가되는 시험하중은 각 항공기의 설계 하중의 특성 및 하중부가용 스트랩의 위치 등에 따라 그 크기가 다르게 결정되므로 본 연구에서 소개하는 시험하중 산출방법을 모두 적용하여 결과를 비교해보고 최종적으로 적합한 방법을 선정하는 과정이 필요하다.