• Design & Manufacturing
• /
• 제9권3호
• /
• pp.41-44
• /
• 2015

The progressive die is processing methods that can improve the productivity for sequentially transferring while continuously producing in multiple processes. In this study was carried out the die analysis through the load analysis acting on the terminal die and sheet metal forming also the study was carried out with respect to optimized die design for the terminal die and progressive die manufacturing using the CimatronE Die Design.

• 한국산학기술학회논문지
• /
• 제12권12호
• /
• pp.5398-5404
• /
• 2011

전기를 사용하는 친환경 자동차는 상이하지만 전기모터, 배터리, BMS, 인버터, 컨버터 등이 각기 핵심기술이다. 특히 전기모터의 주요부품 중 하나인 터미널 부품을 금형설계 및 제작하였다. 본 연구에서는 전기모터 터미널 금형의 제작과정 중 조립성 불량 수정, R부 형상 수정, 구멍과 구멍간의 위치 수정 등의 문제점을 도출, 수정, 해결하고자 하였다.

• Design & Manufacturing
• /
• 제2권3호
• /
• pp.45-50
• /
• 2008

In the electronic products, connector which play a role of board-to-board connection is an essential part. The manufacture process of this connector involves slitting and bending stage. Recently, manufacturing the connector is becoming more and more difficult as miniaturization of the electronic products. In this study, FEM analysis was performed on slitting and bending process for connector terminal with micro width in order to predict the cause of inaccurate dimension of connector terminal which occurs in actual industrial spot.

• 한국산학기술학회논문지
• /
• 제11권12호
• /
• pp.4691-4696
• /
• 2010

본 논문에서는 HEV UV단자를 자동화 모듈인 씨마트론 다이 디자인을 활용하여 스트립 레이아웃설계를 3D로 하였다. 제품의 스탬핑을 원활하게 하기 위하여 스트립 레이아웃을 33.5도 경사지게 수정하여 광폭 1열 1개 뽑기의 내측캐리어를 단 배열로 블랭크 레이아웃을 최적화하였다. 1개의 금형에서 두개의 단자를 공용으로 양산하기 위해 29개 공정으로 3D 스트립 레이아웃설계 및 금형설계를 완성하였다.

• 한국농공학회논문집
• /
• 제53권6호
• /
• pp.153-163
• /
• 2011

This research describe improved algorithm that is able to decide terminal criterion of Evolutionary Structural Optimization (ESO), reducing load of calculation to search load path of concrete beam, and apply to agricultural facilities. The ESO method is that make to discrete structure, structural analyze each element stress through FEM. And repeat generation with next material condition to become for most suitable composing. Individual element introduces concept of zero stiffness, but zero stiffness decisions are gone to direction of exclusion. In this stduy, improve algorithm to be convergence by 'Rule of Alive or Die' in arrival because is most suitable. Also, existing terminal criterion lack consistency because that used depend on experience of researcher. This research procedure is fellowed. First, all modulus of elasticity assume a half of elasticity modulus of material, Second, structural analysis by FEM, Third, apply to the remove ratio and restoration ratio for the 'rule of alive or die'. Forth, reconstruct the element and material conditions. And repeat the first to forth process. The terminal time of evolutional procedure is the all elastic modulus of element changed to blank value or elasticity modulus value of original. Therefore, in this study, consist the algorithm for programming, and apply to the agricultural facilities with concrete.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1998년도 추계학술대회논문집:21세기에 대비한 지능형 통합항만관리
• /
• pp.223-238
• /
• 1998

In this study, to investigate the effect of process variables such as reduction in area, semi-die angle and the rectangular ratio to the corner filling which influences the dimensional accuracy of the final product in the drawing of the cluadrangle rod from a round bar, it has been simulated by three dimensional rigid-plastic finite element method. In order to reduce the number of simulation artificial neural network has been introduced. Also, through the experimental investigation, the present results have been implemented on the industrial product. In results, the main process variable is the combination of the semi-die angle in case of the irregular shaped drawing process and reduction in area in the event of regular shaped drawing process, respectively.

• Design & Manufacturing
• /
• 제10권1호
• /
• pp.36-40
• /
• 2016

Connectors transmit electric signals to different parts in compact mobile display products. As products that apply this have become lightweight and smaller in size, there are growing demands for smaller and more integrated connectors, which are internal parts of the products. As a measure to address these demands, there is the planar array connector that minimizes the part by arranging the single-direction BTB connectors to two directions. As connectors become smaller in size and more highly integrated, maintaining intensity to prevent defects during impact and maintaining adhesive force to smoothly transmit electric signals are growing in importance. Thus, in order to identify the impact of concave shaping on improving adhesive power in connector terminal pins as a method to increase the connecting power of planar array connector terminal pins, this study predicted and examined the concave shaping method, number of concave shapes, and the adhesive power according to the size of the concave shape through CAE. For concave shaping, the model that added concave shaping towards the lower part of the connector terminal pin and added spokes for the area pressed down by the concave shaping was 0.74 N, showing increased adhesive force compared to existing models. Furthermore, when applying two concave shaping, rather than just one, there was a tendency for adhesive force to increase. In the case of adhesive power trends according to the size of the concave shaping, adhesive power increased and the width of the concave shape decreased, and the biggest adhesive force trends were shown when the concave shaping depth was 0.01mm.

• Design & Manufacturing
• /
• 제14권3호
• /
• pp.17-22
• /
• 2020

As devices such as smartphones, tablet PC, and wearable devices have been miniaturized, the connectors that go into the devices are also designed to be very small. The connector combines the plug and the receptacle to transfer electricity. As devices are miniaturized, the contact shape is formed by partially thinning the thickness of the raw material of the terminal in order to lower the coupling height of the plug and receptacle. The product used in this study is a receptacle terminal used for 0.4mm pitch board to board connector among fine pitch connectors. When the material thickness is reduced by forging the receptacle terminal, the width change of the pin is checked. To reduce the thickness of the material by forging, pre-notching is applied in the first step, forging in the second step, and notching in the third step. After forming the width dimension of the pin to 0.28 mm in the pre-notching process, in the forging process, the material thickness 0.08 mm and 0.02 mm (25%) were forged and the thickness was changed to 0.06 mm and the width change amount of the pin was measured. The facility produced 10,000 pieces at 400 SPM using a Yamada Dobby (MXM-40L) press, and thirty pins were measured and the average value was shown. After forging by using C5210-H (HP) and NKT322-EH, which are frequently used in connectors, analyze the amount of change in each material. The effect of punching oil on forging is investigated by appling FM-200M, which is highly viscous, and FL-212, fast drying oil. This study aims to minimize mold modification by predicting the amount of material change after forging.

• Journal of Hospice and Palliative Care
• /
• 제25권1호
• /
• pp.42-49
• /
• 2022

As population aging increases the burden of cancer, the quality of death of patients with cancer is emerging as an important issue alongside their quality of life. To improve the quality of death, it is necessary to prepare for death, allowing patients to die comfortably and with dignity at the end. Considering these issues, I aim to discuss the practical aspects of notifying the patient of the terminal phase of cancer and planning for end-of-life care (i.e., advance care planning). When cancer treatment that can extend the patent's lifespan becomes difficult, the patient enters a treatment transition period. Treatment is shifted from life-prolonging care to life-enhancing care, and end-of-life care must be well planned. Medical providers often worry too much about whether the patient will be disappointed or psychologically traumatized when notified of the terminal phase of their cancer, thus delaying plans for end-of-life care. In fact, patients can accept their condition and prepare for end-of-life care better than we expect. During the treatment transition period, notification of terminal status should be given, and a well-prepared advance care plan should be established early when the patient has decision-making ability. In addition to conveying information, it is always necessary to be sensitive to whether the patient and caregiver understand the information and respond to their emotions.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.210-215
• /
• 2003

A terminal pin, which is a part of high-voltage capacitors, has a head section of plate-shaped geometry with 0.8 thickness. The current manufacturing process, in which the head section is welded on the body part, has given wide deviations of part qualities such as geometrical accuracy, mechanical strength and electrical stability. In this paper, a cold forging process sequence was designed in order to produce the terminal pin as one piece. The plate-shaped head section requires an upsetting in the lateral direction of a cylindrical billet, which is followed by a blanking process. The deformed geometry of the upsetting, however, could not be predicted precisely by intuition since metal flows of an axial and a lateral direction of the cylindrical billet would occur simultaneously. Therefore, the geometry of the initial billet was determined by three dimensional finite element analysis in order to avoid defects in blanking process and intermediate forging processes were designed by applying design rules and two dimensional FE analysis. In addition, cold forging tryouts were conducted by using the die sets which were manufactured based on the designed process sequence.