• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.3
• /
• pp.704-709
• /
• 1997

Space maintainers needs following extraction of primary molars, due to severe dental caries under general anesthesia. Delivery of conventional space maintainers has three of the disadvantages of the method, there being a impression taking and time consuming due to laboratory procedure, and delivery problem due to relaxed tongue. For this problem improved, modified space maintainer is prefabricated before procedure, and adjust, delivery in operation room, favorable results were obtained. The following results were obtained. 1. Delivery time is very reduced than conventional space maintainers. 2. After space maintainer delivery, follow check-up, without impingement of soft tissue, distortion of wire. After space maintainer delivery, continuous research is required so that space maintainer delivery is applied to usual dental treatment, and it is necessary of long term research.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2007.11a
• /
• pp.586-591
• /
• 2007

지식 관리 시스템, 정보 검색 시스템, 그리고 전자 도서관 시스템 등의 문서를 다루는 시스템에서는 문서의 구조화 및 문서의 저장이 필요하다. 문서에 담겨있는 정보를 추출하기 위해 가장 우선시되어야 하는 것은 키워드의 선별이다. 기존 연구에서 가장 널리 사용된 알고리즘은 단어의 사용 빈도를 체크하는 TF(Term Frequency)와 IDF(Inverted Document Frequency)를 활용하는 TF-IDF 방법이다. 그러나 TF-IDF 방법은 문서의 의미를 반영하지 못하는 한계가 존재한다. 이를 보완하기 위하여 본 연구에서는 세 가지 방법을 활용한다. 첫 번째는 문헌 속에서의 단어의 위치 및 서론, 결론 등의 특정 부분에 사용된 단어의 활용도를 체크하는 문헌구조적 기법이고, 두 번째는 강조 표현, 비교 표현 등의 특정 사용 문구를 통제 어휘로 지정하여 활용하는 방법이다. 마지막으로 어휘의 사전적 의미를 분석하여 이를 메타데이터로 활용하는 방법인 언어학적 기법이 해당된다. 이를 통하여 키워드 추출 과정에서 문서의 의미 분석도 수행하여 키워드 추출의 효율을 높일 수 있다.

• Journal of Korean Dental Science
• /
• v.15 no.2
• /
• pp.181-189
• /
• 2022

Molar incisor malformation (MIM) has been introduced as a new type of dental anomaly. Currently, the morphological and histological characteristics of MIM are known; however, its etiology has not been clearly identified. To date, the long-term prognosis of first permanent molars (FPM) affected by MIM has rarely been reported, and few treatment guidelines have been established. The purpose of this case report was to present guidelines for the extraction of FPM affected by MIM, depending on the presence of the third molar. In patients with a third molar, spontaneous mesial shift of the posterior molars might be induced by extracting the FPM at an appropriate time, that is, when the second permanent molar is at an early furcation stage of the tooth. However, it is recommended that FPM be preserved for as long as possible if a third molar does not exist. When an FPM needs to be extracted, it is suggested to consider space maintenance.

• The korean journal of orthodontics
• /
• v.52 no.4
• /
• pp.298-307
• /
• 2022

Glossectomy combined with radiotherapy causes different levels of tongue function disorders and leads to severe malocclusion, with poor periodontal status in cancer survivors. Although affected patients require regular access to orthodontic care, special considerations are crucial for treatment planning. This case report describes the satisfactory orthodontic management for the correction of severe dental crowding in a 43-year-old female 6 years after treatment for tongue cancer with total glossectomy combined with radiotherapy, to envision the possibility of orthodontic care for oral cancer survivors. Extraction was performed to correct dental crowding and establish proper occlusion following alignment, after considering the possibility of osteoradionecrosis. Orthodontic mini-implants were used to provide skeletal anchorage required for closure of the extraction space and intrusion of the anterior teeth. The dental crowding was corrected, and Class I occlusal relationship was established after 36 months of treatment. The treatment outcome was sustained after 15 months of retention, and long-term follow-up was recommended.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.39 no.1
• /
• pp.52-60
• /
• 2023

Autotransplantation of third molars with completely formed roots is known to be effective and provide a high long-term success rate. However, in case of severe mobility or unexpectedly extraction is observed during the monitoring period after surgery, it is generally considered as a failure. This case report describes successful replantation of autotransplanted mature third molar into surgically created molar socket. 1 year follow up of transplanted tooth showed clinically normal periodontal pocket depth and tooth mobility. Root resorption or bone loss were not observed. Provided that there is no apparent sign of inflammation, re-insertion into socket is a viable alternative to immediate determination of extraction.

• Economic and Environmental Geology
• /
• v.36 no.3
• /
• pp.159-170
• /
• 2003

Heavy metals are extracted from Chonju stream sediment, roadside soils and sediments along Honam expressway, soils and tailings from mining area using three different methods (partial extraction in Standard Method, partial extraction method with maintaining 0.1 N of extraction solution and Sequential Extraction Method). In samples having buffer capacity against acid, pH 1 (0.1 N HCl) of extraction solution can not be maintained and pH of extraction solution increases up to 8.0 when partial extraction in Standard Method is used. The averages and ranges of HPE(heavy metals extracted using partial extraction in Standard Method)/HPEM(heavy metals extracted using partial extraction method with maintaining 0.1 N of extraction solution) values are 0.479 and 0.145~0.929 for Cd, 0.534 and 0.078~0.928 for Zn, 0.432 and 0.041~0.992 for Mn, 0.359 and 0.011~0.874 for Cu, 0.150 and 0.018~0.530 for Cr, 0.219 and 0.003~0.853 for Pb, and 0.088 and 1.73${\times}$10$^{-5}$~0.303 for Fe. These data indicate that the difference between HPE and HPEM is large in the order of Fe, Cr, Pb, Cu, Mn, Cd and Zn. The amounts of heavy metals extracted decreases in the follow order; Sum III(sum of fraction I, II, III in sequential extraction)>HPEM>Sum III (sum of fraction I and II)>HPE for Zn, Cd and Mn and Sum III>HPEM>HPE for Cr and Fe. In the case Cr, Sum II is lower than HPEM and higher than HPE. In case of Cu, extracted heavy metals is large in the order Sum IV>HPEM>Sum III HPE. HPE/HPEM value decreases with increasing the amount of HCl used for maintaining 0.1 N of extraction solution. For samples with high buffer capacity, HPE/HPEM value in all elements is lower than 0.2. On the other hand, for samples with low buffer capacity, HPE/HPEM value are over 0.2 and many samples have values higher than 0.6 for Zn, Cd Mn and Cu due to the small difference between Sum II and Sum III, and relatively higher mobility. However, for Fe and Cr, HPE/HPEM value is below 0.2 even for samples with low buffer capacity due to their low mobility and big difference between Sum II and Sum III. This study indicates that the partial extraction method in Korean Standard Method of soil is not suitable for an assessment of soil contamination in area where buffer capacity of soil can be decreased or lost because of a long term exposure to environmental damage such as acidic rain.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.9
• /
• pp.1407-1416
• /
• 2007

Ten, first lactation, 87.5%HF dairy cattle were used to investigate effects of long-term administration of recombinant bovine somatotropin (rbST) on nutrient uptake by the mammary gland at different stages of lactation. Measurements of arterial plasma concentrations and arterial-venous differences of metabolites across the mammary gland were performed in combination with measurment of mammary blood flow to estimate the mammary uptake. Animals in experimental groups were injected subcutaneously every 14 days from day 60 of lactation with a prolonged-release formulation of 500 mg of rbST (POSILAC, Monsanto, USA) or with sterile sesame oil without rbST in the control group. During early lactation, the milk yield of rbST-treated animals was higher than that of the control animals (p<0.05). The peak milk yield in both groups of animals declined from the early period of lactation with progression to mid- and late-lactation. No significant changes were observed in the concentration of milk lactose, while the concentrations of milk protein significantly increased as lactation advanced to mid- and late-lactation in both groups. Milk fat concentrations were significantly higher in rbST-treated animals than in control animals, particularly in early lactation (p<0.05). Mammary blood flow (MBF) markedly increased during rbST administration and was maintained at a high level throughout lactation. The mean arterial plasma concentrations for glucose and acetate of rbST-treated animals were unchanged. The net mammary glucose uptake of rbST-treated animals increased approximately 20% during early lactation, while it significantly decreased (p<0.05), including the arteriovenous differences (A-V differences) and extraction ratio across the mammary gland, as lactation advanced to mid- and late-lactation. A-V differences, mammary extraction and mammary uptake for acetate increased during rbST administration and were significantly higher (p<0.05) than in the control animals in early and mid-lactation. Mean arterial plasma concentrations for ${\beta}$-hydroxybutyrate and free glycerol were unchanged throughout the experimental periods in both groups. A-V differences and extraction ratio of ${\beta}$-hydroxybutyrate across the mammary gland did not alter during rbST administration. Mean arterial plasma concentrations for free fatty acids ($C_{16}$ to $C_{18}$), but not for triacylglycerol, increased in rbST-treated animals and were significantly higher than in control animals during early lactation (p<0.01). These findings suggest that an increase in MBF during rbST administration would not be a major determinant in the mediation of nutrient delivery and uptake by the mammary gland for increased milk production. Local changes in biosynthetic capacity within the mammary gland would be a factor in the utilization of substrates resulting in the rate of decline in milk yield with advancing lactation.

• Journal of The Korean Association of Information Education
• /
• v.16 no.4
• /
• pp.483-488
• /
• 2012

As propagation of mobile smart devices is widespread, it is an observable trend that the cases of utilizing them are increasing in the school programs, and it is also anticipated that they will be very important part of the educational equipment in near future. For this reason the department of education and science technology has announced a medium and long term project on the education with smart device, which is undergoing the preparation stage, and the various academic and industrial institutes have actively produced the related research results and the application prototypes. In this paper we propose a framework on design and implementation of a visual context recognition system for educational purpose usable in the school program by utilizing a module for recognition of the texts embedded in the image captured by video camera from mobile smart device. The system proposed in this paper is consisted of the four modules, such as, image acquisition, image processing, information extraction, and knowledge representation, which are explained in details with the practical examples.

• The Research Journal of the Costume Culture
• /
• v.19 no.3
• /
• pp.612-621
• /
• 2011

The process of making or cultivating indigo dyes is very cumbersome and complex. The dye extraction and dyeing methods using general plant dye, moth repellent dye, fast acting natural dye, and other dyes are very different. This research investigates the extraction of indigo dye and liquid dye extraction of polygonum(indigo) plants using calcium oxide water. While extracting indigo dye the concentration of purified indigo dye may be controlled by adjusting the pH level. Due to the various uses of dyes the adjustment of surface color must be considered. In regard to the change according to different concentrations of reducing agents, it was found that cotton fabrics and ramie fabrics show the highest color difference at 0.4% and 0.3% respectively. As the reduction temperature increases, the color difference increases as well. The maximum color difference was found to appear at $90^{\circ}C$. Cotton fabrics and ramie fabrics showed 70.55 and 67.01 respectively. The color difference increases as the concentration of dyes increases, but at a concentration of 300%, cotton fabrics was found to show 6.22PB in H value using the Munsell color system, containing purple and blue color. The pH of the polygonum dyes extracted through this experiment were adjusted by adding calcium oxide to the experimental water, without directly adding calcium oxide to the liquid polygonum extract. In a refine state, it was mixed with polygonum extract to extract a more refine and highly concentrated indigo dye. When lye and reducing agents are added to extracted indigo dye and sealed for long-term storage, it can be effective and easily used for dyeing.

• Journal of Korea Multimedia Society
• /
• v.13 no.4
• /
• pp.504-511
• /
• 2010

In this paper, we propose the face region recognition system for City-Security CCTV(Closed Circuit Television) using hippocampal neural network which is modelling of human brain's hippocampus. This system is composed of feature extraction, learning and recognition part. The feature extraction part is constructed using PCA(Principal Component Analysis) and LDA(Linear Discriminants Analysis). In the learning part, it can label the features of the image-data which are inputted according to the order of hippocampal neuron structure to reaction-pattern according to the adjustment of a good impression in a dentate gyrus and remove the noise through the auto-associative memory in the CA3 region. In the CA1 region receiving the information of the CA3, it can make long-term memory learned by neuron. Experiments confirm the each recognition rate, that are shape change and light change. The experimental results show that we can compare a feature extraction and learning method proposed in this paper of any other methods, and we can confirm that the proposed method is superior to existing methods.