• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.1076-1082
• /
• 2006

This study measured the change of media properties using Time domain Reflectometry (TDR) and Tensionmeter (TM) to measure volumetric water content of soil affecting in land subsidence and pollutant diffusion under saturation/unsaturated condition by water-level fluctuations. Also, actual water content compared their changes aspect by dry oven test for quantitative determinations of these measured values. In the case of TM, initial unsaturated condition confirmed that range in dimension of each other different according to their establishment depth, but measured values of TM can know that is shown measured value in almost similar measuring range under drain condition after the first injection. Also, the results of TDR showed that can measure enough change of volumetric water content in saturation/unsaturated condition by water-level fluctuations. Therefore, we are judged that TDR measurement equipment is very effective to measure the variations of volumetric water content and water-level being caused in groundwater level fluctuations.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1993.10a
• /
• pp.61-62
• /
• 1993

고분자 분리막의 투과성과 선택성을 향상시키기 위하여 IPN막, 고분자/액정 복합막을 다양한 기능을 가진 재료가 개발되고 있다. 본 연구에서는 알칼리메탈이온을 분리하기 위하여 고분자 지지체에 운반체로써 crown ether(macro-cyclic polyether)류를 분산시킨 고분자/운반체 복합박막을 제조하였다. 고분자/운반체 복합박막은 고분자와 운반체의 혼합용액을 수면에 전개시켜 제조하였다. 고분자는 PVC(M.W 60000, Aldrich), PS(M.W 280000, Aldrich)와 CA(M.W 30000, Sigma)를 사용하였고, 운반체로는 crown ether 중 $K^+$이온과 선택성을 가지는 18-Crown-6(Sigma)를 사용, 고분자와 18-Crown-6의 증량분을 달리하는 혼합용액을 제조하였다. 이때 용매는 Tetrahydrofuran를 사용하였다. 수면에 생성된 박막을 다공성 지지막에 적층시킨 후 감압 건조시켜 복합막을 제조하였다. 고분자와 운반체가 혼합되어 있는 용액의 점도와 표면장력을 각각 fluid spectrometer와 tensionmeter를 사용, 용액이 수면위에서 완전한 막을 형성하면서 분산될 수 있는지 조사하였으며, 고분자 지지체에 분산 고정된 운반체의 분산형태와 표면농도를 조사하기 위하여 ESCA를 이용하였다.

• Microbiology and Biotechnology Letters
• /
• v.31 no.2
• /
• pp.171-176
• /
• 2003

Productivity of biosurfactant (rhamnolipid) by Pseudomonas aeuginosa F722 was investigated in the several culture conditions and culture composition. Biosurfactant production by P. aeuginosa F722 was amounted to 0.78 g/l as the result of the nitrogen sources and carbon sources without investing of optimum conditions. As for that one was investigated, biosurfactant production by P. aeruginosa F722 was amounted to 1.66 g/l. Biosurfactant production increased twofold because the composition of a modified C-medium was investigated efficiently. $NE_4$Cl or $NaNO_2$ inorganic nitrogens and yeast extract or trypton organic nitrogens were effective, but others inorganic nitrogens and organic nitrogens tested were not efficient far biosurfactant production by P. aeruginosa F722. The optimum concentration of $NH_4$Cl; inorganic nitrogen and yeast extract; organic nitrogen were 0.05% and 0.1%, respectively. In various carbon sources, others with the exception of hydrophobic property substrate (n-alkane) and hydrophilic property substrate (glucose, glycol) were not found to be effective fur biosurfactant production, and 3.0% was better in yield than other concentration of glucose. This yielded C-to-N ratios between 17 and 20. In our experiment, the highest biosurfactant production by P. aeruginosa F722 were observed in 5 days cultivation, containing glucose 3.0%, $NH_4$Cl 0.05%, and yeast extract 0.1% and C-to-N ratio was 20. Optimal pH and temperature for biosurfactant production were 7.0 and $35^{\circ}C$, respectively. Under the optimal culture conditions with glucose, biosurfactant production was amounted to 1.66 g/l. Velocity of biosurfactant production and strain growth increased after nitrogen depletion. The average surface tension of 30 mN/m after the 3 days of incubation under optimal culture condition was measured by ring tensionmeter.

• Journal of the Korean Institute of Gas
• /
• v.16 no.5
• /
• pp.66-75
• /
• 2012

Polyurethane foams were synthesized by substituting a portion of petroleum base polyether polyol with castor oil-derived polyol(COP). Contact angle tester and surface tensionmeter were used to examine the compatibility of petroleum base polyether polyol and COP. To investigate the optimum content of COP and surfactant, the content of COP has been changed from 0 wt% to 80 wt%. From the results of polyurethane foams synthesized by surfactant L-580K, DC-5950 and BF-2470, the best mechanical properties was observed when the content of COP was 30wt% and surfactant BF-2470.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.46 no.3
• /
• pp.257-264
• /
• 2010

In order to improve the breaking strength and elongation of Polybutylene succinate (PBS) monofilament, the monofilament was produced by blending PBS and Polybutlyne adipate-co-terephthalate (PBAT). The PBS/PBAT blend monofilament was prepared by the melt spinning system, and the weight ratios of the compositions of PBS/PBAT was 100/0, 95/5, 90/10 and 85/15, respectively. The breaking strength, elongation, softness and crystallization of PBS/PBAT blend monofilament were analyzed by using a tensionmeter, softness measurement, X-ray diffractometer in the both dry and wet conditions. The PBS/PBAT blend monofilaments were spun in the take-up velocity of 1.19m/sec under the drawing ratio of 6.8:1 condition. The production volumes of PBS/PBAT blend monofilaments showed 20% less than that of Nylon. The breaking strength of PBS/PBAT blend monofilaments were decreased as PBAT contents increased, while elongation and softness were increased. In case of PBAT content were over 5%, the breaking strength, elongation and softness of PBS/PBAT blend monofilaments were not shown to increase in spite of increasing in PBAT contents. Based on these results, it was possible to make the monofilaments with the maximized physical properties when the PBAT contents at 5%.