• Title/Summary/Keyword: Tension cracks

Search Result 247, Processing Time 0.021 seconds

The Stability and Characteristic Analysis of Cut Slope Behavior using Real-time Monitoring System (상시 계측시스템을 이용한 붕괴 절토사면 거동 특성 분석 및 안정성 해석)

  • Baek, Yong;Koo, Ho-Bon;Jang, Ki-Tae;Yoo, Byung-Sun;Bae, Gyu-Jin
    • The Journal of Engineering Geology
    • /
    • v.14 no.1
    • /
    • pp.71-80
    • /
    • 2004
  • The failure of cut slopes frequently occurs particularly during the thawing season and the rain season in summer. This study interpreted data collected from site to which a real-monitoring system was applied in order to analyze the causes of ground behaviors and to forecast future slope failure. As for research methods, this study analyzed the size and mechanism of failure by integrating the results of field surveys and measurements. Furthermore, it analyzed data transmitted by the monitoring system installed in the a result, three times of ground displacement occurred as well as a number of partial tension cracks. The cut slope composed of sandstone and siltstone started its initial behavior as a result of torrential downpour and the loss of support of the substructure. For quantitative analysis of the characteristics of ground behavior, this study measured 5 lateral lines. According to the result of the measurement, displacement happened little in the section to which countermeasure had been applied, but displacement of maximum 400mm happened in the section to which countermeasure had not bee applied. The analysis of data on displacement and rainfall suggested a close relationship between ground behavior and rainfall. According to the result of stability interpretation along with the change of ground saturation, stability rate appeared to be less than 1.0 when ground saturation is over 55%. Although the current trend of ground behavior is at a stable stage falling within the range of tolerance, it is considered necessary to continue monitoring and data analysis because ground displacement is highly possible with the change of temperature during the winter.

The Limitations of Holocaust Narratives and the Possibility of Healing Narratives Suggested by Smith's Fires in the Mirror ('홀로코스트' 서사의 한계와 스미스의 『거울 속에 반영된 분노』에 제시된 치유 서사의 가능성)

  • Jung, Sun-kug
    • Cross-Cultural Studies
    • /
    • v.43
    • /
    • pp.377-404
    • /
    • 2016
  • In this paper, I intend to focus on the 1991 racial tension and violence portrayed in Anna Devear Smith's book Fires in the Mirror, which was published in book form in 1993. I make use of a series of interviews with many of those involved in the conflicts, which were based on the Jewish Holocaust and the history of African American enslavement. In Crown Heights, the black community and the Jewish community have each suffered terrible losses, but individuals and communities become rhetorically attached to foundational historical traumas that lie at the center of each group's cultural identity rather than try to understand each other's pain. Smith lets this rhetoric dominate Fires in the Mirror by putting contradictory monologues side by side in order to show how discourses on 'slavery' and 'the Holocaust' still have control over specific ethnic communities. My intention is not to delve into the conflict between the Jewish and black communities exclusively. Rather, I attempt to form an understanding of the problems of the critical/theoretical tenets proposed by 'the rhetoric of holocaust,' including the Jewish Holocaust and the black experience of enslavement. Such an understanding will help us see the failure in the theories, illuminating the ways that such rhetoric should have recognized its own violence and helped to forge a new relationship between racism and anti-Semitism. Fires in the Mirror mirrors back to us the ways that 'the Holocaust' betrays the possibility of error to indicate its own susceptibility to blindness. The cracks brought forth by conflicting narratives enable readers to observe wounds being healed and the possibility of new narrative looming up.

A Case Study on the Cause Analysis of Land creep Using Geophysical Exploration (물리탐사를 활용한 땅밀림 원인분석의 사례적 연구)

  • Jae Hyeon Park;Gyeong Mi Tak;Kook Mook Leem
    • Journal of Korean Society of Forest Science
    • /
    • v.112 no.3
    • /
    • pp.382-392
    • /
    • 2023
  • Recent reports have indicated a rapid increase in the frequency of sediment disasters due to climate change and other changes in the geological environment. Given this alarming situation and the recent increase in the frequency of land creep in Korea, systematic and efficient recovery and management of land creep areas is essential. The purpose of this study is to identify disaster vulnerability by conducting a physical exploration of land creep in San 4-1, Jayeon-ri, Gaegun-myeon, Yangpyeong-gun, Gyeonggi-do, and examine stability by identifying the overall geological structure of the affected ground. In addition, drilling surveys are conducted to verify the reliability of the measured data. The results of the study reveal that low specific resistance abnormalities are distributed in the upper part of the soil layer and weathering zone and that this section is a 50-120 m exploration line. It is also confirmed to be a low-hardness ground area where tensile cracks are observed. Therefore, there is a need for research focused on developing measures to reduce economic and social damage within the domestic context by continuously monitoring indicators of land creep and identifying land creep risks.

Nonlinear Analysis of Steel-concrete Composite Girder Using Interface Element (경계면 요소를 사용한 강·콘크리트 혼합 거더의 비선형 거동 해석)

  • Kwon, Hee-Jung;Kim, Moon Kyum;Cho, Kyung Hwan;Won, Jong Hwa
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.29 no.4A
    • /
    • pp.281-290
    • /
    • 2009
  • In this study, an analysis technique of hybrid girder considering nonlinearity of steel-concrete contact surface is presented. Steel-concrete hybrid girder shows partial-interaction behavior due to the deformation of shear connectors, slip and detachment at the interface, and cracks under the applied loads. Therefore, the partial-interaction approach becomes more reasonable. Contact surface is modeled by interface element and analyzed nonlinearly because of cost of time and effort to detailed model and analysis. Steel and Concrete are modeled considering non-linearity of materials. Material property of contact surface is obtained from push-out test and input to interface element. For the constitutive models, Drucker-Prager and smeared cracking model are used for concrete in compression and tension, respectively, and a von-Mises model is used for steel. This analysis technique is verified by comparing it with test results. Using verified analysis technique, various analyses are performed with different parameters such as nonlinear material property of interface element and prestress. The results are compared with linear analysis result and analysis result with the assumption of full-interaction.

The post-epic characteristics in Jan Lauwers' theatre -, and - (얀 라우어스(Jan Lauwers) 공연의 탈서사적 특징들 -<이사벨라의 방(Isabella's Room)>, <랍스터 가게(The Lobster Shop)>, <사슴의 집(Deer House)>을 중심으로-)

  • Nam, Jisoo
    • Journal of Korean Theatre Studies Association
    • /
    • no.48
    • /
    • pp.447-484
    • /
    • 2012
  • This study aims to analyze the characteristics of post-epic theatre in the Belgian theatre director Jan Lauwers' trilogy titled in "Happy Face/Sad Face": (2004), (2006) and (2008). I regard that it played a very important junction for him to create his own theatrical style compared to earlier years. From this period, Lauwers has tried to create his original plays in order to concentrate the story of our era and has showed to combine a variety of media such as dance, installation, video, singing etc. In this context, I would like to study his own theatricality from the three perspectives of dramaturgy, directing and acting largely based on Hans-Thies Lehmann's theory of post-epic theatre, who pointed out the significance of Lauwer's theatrical leading role very early. First, from the dramaturgical point of view, we need to pay attention to the theme of translunary death; where the living and the dead coexist on the stage. In fact, death is the theme that Lauwers has been struggling to research for quite long time. In his trilogy, the dead never exits the stage. The dead, who is not a representative tragic character, even meddles the things among or with the living and provide comments to people. As a consequence, it happens to reduce a dramaturgical strong tension, leads depreciation of suspense and produces humanism in a way. This approach helps to create his unique comical theatrical atmosphere even though he deals with the contemporary tragic issues such as war, horror and death. Second, from the directing point of view, it is worth to take a look at the polyphonic strategy in terms to applying various media. Among all the things, the arts of dancing and singing in chorus are actively applied in Lauwer's trilogy. The dance is used in individual and microscopic way, on the other hand, singing shows collective and is a macroscopic quality. The dance is the representing media to show Lauwer's simultaneous microscopic mise-en-scene. While main plot takes place around the center-stage, actors perform a dance around the off-centered stage. Instead of exiting from the stage during the performance, the actors would continue dance -sometimes more like movements- around the off-centered stage. This not only describes the narrative, but also shows how each character is engaged to the main plot or incident, and how they look into it as a character. Its simultaneous microscopic mise-en-scene intends to function such as: showing a variety moments of lives, amplifying some moments or incidents, revealing character's emotion, creating illusionary theatrical atmosphere and so on. Meanwhile, singing simple lyrics and tunes are an example of the media to stimulate the audiences' catharsis. As the simple melody lingers in the audiences' mind, it ends up delivering a theatrical message or theme after the performance. This message would be transferred from the singing in chorus functions as a sort of leitmotive in order to make an impression to the audience. This not only richens their emotion but also creates an illusionary effect. Third, from the acting perspective, I'd like to point out the "detachment" aesthetic which Lehmann has pointed out. The actors never go deep into the drama by consistently doing recognize a theatrical illusion. The audience happens to pay attention to their presence through the actor's deliberate gesture, business, movement, rhythm, language, dance etc. The actors are against forming closed action by speaking in various languages or by revealing deliberately stage directions or acts, and by creating expressive mise-en-scene with multiple media. As a consequent, the stage can be transformed to not a metaphoric but a metonymic place. These actions are the ultimate intention for a direct effect to the audience. So to speak, Lauwers uses the anti-illusionary theatrical method: the scenes of fantastic death, interruption of singing and dance, speaking many kinds of languages, acting in detachment-status and so on. These strategies function to make cracks in spectators' desire who has a desire to construct a linear narrative. I'd like to say that it is the numerous potentiality to let the reality penetrate though and collide the reality with a fiction. By doing so, it induces for spectators to see the reality in the fiction. As Lehmann says, "when theatre presents itself as a sketch and not as a finished painting, the spectators are given the chance to feel their own presence, to reflect on it, and to contribute to the unfinished character themselves". In this sense the spectators can perform an objective criticism on our society and world in Lauwer's theatre because there are a number of gaps and cracks in his theatrical illusion where reality can penetrate. This is also the point that we can find out the artists' responsibility in this era of our being.

The Effect of Surface Defects on the Cyclic Fatigue Fracture of HEROShaper Ni-Ti rotary files in a Dynamic Model: A Fractographic Analysis (Fractographic 분석을 통한 HEROShaper 니켈티타늄 전동 파일의 피로파절에 미치는 표면결함의 역할)

  • Lee, Jung-Kyu;Kim, Eui-Sung;Kang, Myoung-Whai;Kum, Kee-Yeon
    • Restorative Dentistry and Endodontics
    • /
    • v.32 no.2
    • /
    • pp.130-137
    • /
    • 2007
  • This in vitro study examined the effect of surface defects on cutting blades on the extent of the cyclic fatigue fracture of HEROShaper Ni-Ti rotary files using fractographic analysis of the fractured surfaces. A total of 45 HEROShaper (MicroMega) Ni-Ti rotary flies with a #30/.04 taper were divided into three groups of 15 each. Group 1 contained new HEROShapers without any surface defects. Group 2 contained HEROShapers with manufacturing defects such as metal rollover and machining marks. Croup 3 contained HEROShapers that had been clinically used for the canal preparation of 4-6 molars A fatigue-testing device was designed to allow cyclic tension and compressive stress on the tip of the instrument whilst maintaining similar conditions to those experienced in a clinic. The level of fatigue fracture time was measured using a computer connected the system. Statistical analysis was performed using a Tukey's test. Scanning electron microscopy (SEM) was used for fractographic analysis of the fractured surfaces. The fatigue fracture time between groups 1 and 2, and between groups 1 and 3 was significantly different (p<0.05) but there was no significant difference between groups 2 and 3 (p>0.05). A low magnification SEM views show brittle fracture as the main initial failure mode At higher magnification, the brittle fracture region showed clusters of fatigue striations and a large number of secondary cracks. These fractures typically led to a central region of catastrophic ductile failure. Qualitatively, the ductile fracture region was characterized by the formation of microvoids and dimpling. The fractured surfaces of the HEROShapers in groups 2 and 3 were always associated with pre-existing surface defects. Typically, the fractured surface in the brittle fracture region showed evidence of cleavage (transgranular) facets across the grains, as well as intergranular facets along the grain boundaries. These results show that surface defects on cutting blades of Ni-Ti rotary files might be the preferred sites for the origin of fatigue fracture under experimental conditions. Furthermore this work demonstrates the utility of fractography in evaluating the failure of Ni-Ti rotary flies.

Cyclic Behavior of Wall-Slab Joints with Lap Splices of Coldly Straightened Re-bars and with Mechanical Splices (굽힌 후 편 철근의 겹침 이음 및 기계적 이음을 갖는 벽-슬래브 접합부의 반복하중에 대한 거동)

  • Chun, Sung-Chul;Lee, Jin-Gon;Ha, Tae-Hun
    • Journal of the Korea Concrete Institute
    • /
    • v.24 no.3
    • /
    • pp.275-283
    • /
    • 2012
  • Steel Plate for Rebar Connection was recently developed to splice rebars in delayed slab-wall joints in high-rise building, slurry wall-slab joints, temporary openings, etc. It consists of several couplers and a thin steel plate with shear key. Cyclic loading tests on slab-wall joints were conducted to verify structural behavior of the joints having Steel Plate for Rebar Connection. For comparison, joints with Rebend Connection and without splices were also tested. The joints with Steel Plate for Rebar Connection showed typical flexural behavior in the sequence of tension re-bar yielding, sufficient flexural deformation, crushing of compression concrete, and compression rebar buckling. However, the joints with Rebend Connection had more bond cracks in slabs faces and spalling in side cover-concrete, even though elastic behavior of the joints was similar to that of the joints with Steel Plate for Re-bar Connection. Consequently, the joints with Rebend Connection had less strengths and deformation capacities than the joints with Steel Plate for Re-bar Connection. In addition, stiffness of the joints with Rebend Connection degraded more rapidly than the other joints as cyclic loads were applied. This may be caused by low elastic modulus of re-straightened rebars and restraightening of kinked bar. For two types of diameters (13mm and 16mm) and two types of grades (SD300 and SD400) of rebars, the joints with Steel Plate for Rebar Connection had higher strength than nominal strength calculated from actual material properties. On the contrary, strengths of the joints with Rebend Connection decreased as bar diameter increased and as grade becames higher. Therefore, Rebend Connection should be used with caution in design and construction.