• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 춘계학술발표대회 논문집
• /
• pp.97-100
• /
• 2000

A FEA(finite element analysis) model was proposed to study stress and strain distributions in thick composites with various types of fiber waviness under tensile and compressive loadings. Three types of model were considered in this study: uniform fiber waviness, graded fiber waviness and localized fiber waviness models. In the analysis, both material and geometrical nonlinearities due to fiber waviness were incorporated into the model utilizing energy density and incremental method. The strain distributions of uniform fiber waviness model were strongly influenced whereas the stress distributions were little influenced by fiber waviness. The stress and strain distributions of graded and localized fiber waviness models showed more complex distributions than those of uniform fiber waviness model due to the variation of fiber waviness along the thickness and length directions. It was concluded that the stress and strain distributions of composites with fiber waviness were significantly affected by types of fiber waviness.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2004년도 추계학술발표대회 개요집
• /
• pp.150-152
• /
• 2004

This study was aimed at evaluation of residual stress of steel pipe structures. The production process of pipes was complex (at first bending was done by roll forming or press forming and welding was final process of making of steel pipes). So there could be effected high residual stresses in steel pipes. In order to evaluate the changes of residual stress the locations of measurement were selected carefully. Measurements of residual stress were done for various kinds of pipes (shapes in circular and square). For the evaluation of residual stress, hole-drilling method (ASTM E837 was applied. The results showed that along the weld Eine high tensile stress were measured as effected, and high tensile stresses were measured where large plastic deformation developed. Through these efforts, experimental results could be more effectively assisted by numerical method.

• Structural Engineering and Mechanics
• /
• 제61권3호
• /
• pp.389-396
• /
• 2017

Concrete pavements are subjected to traffic and environmental loadings. Repetitive type of such loading cause fatigue distress which leads to failure by forming cracks in pavement. Fatigue life of concrete pavement is calculated from the stress ratio (i.e. the ratio of applied flexural stress to the flexural strength of concrete). For the correct estimation of fatigue life, it is necessary to determine the maximum flexural tensile stress developed for practical loading conditions. Portland cement association PCA (1984) and Indian road congress IRC 58 (2015) has given charts and tables to determine maximum edge stresses for particular loading and subgrade conditions. It is difficult to determine maximum stresses for intermediate loading and subgrade conditions. The main purpose of this study is to simplify the analysis of rigid pavement without compromising the accuracy. Equations proposed for determination of maximum flexural tensile stress of pavement are verified by finite element analysis.

• 대한치과교정학회지
• /
• 제26권3호
• /
• pp.291-299
• /
• 1996

교정력은 치아이동과 악골성장을 조절하는 기계적 자극이며, 이러한 기계적 자극에 골세포가 반응하므로써 치조골과 악골의 개조가 일어난다. 이러한 기계적 자극은 크게 압축력과 인장력으로 대별된다. 따라서 본 연구는 인장력 및 압축력의 서로다른 기계적자극이 세포활성에 미치는 차이를 알아보기 위하여 조골세포주 MC3T3-E1 세포를 24well 배양접시에 well당 $2{\times}10^4$개의 세포를 넣어 배양한 후, 밀생상태가 되었을때 Diaphragm pump을 사용하여, $25g/cm^2$ 및 $300g/cm^2$의 압축력과 $-25g/cm^2$ 및 $-300g/cm^2$의 인장력을 지속적으로 가하였다. 배양한 후 각각 4일, 6일, 10일, 14일, 18일, 20일째에 ALP활성을 측정한 결과 같은 크기의 압력에서는 인장력에 비해 압축력을 가한 경우에서 ALP활성도가 증가되었으나, 세포는 기계적 자극의 양상 즉 압축력과 인장력을 구별하여 다르게 반응을 하지는 않는 것 같았다. 인장력과 압축력 모두에서 ALP활성도는 시간이 지남에 따라 대조군 수준으로 돌아왔다. 이는 기계적 자극은 세포의 증식과 분화가 왕성한 시기에 세포활성도에 더 크게 영향을 미치는 것으로 생각되며, 압축력과 인장력에 관계없이 기계적 자극의 양이 클수록 ALP활성도의 최고치 도달시간이 지연되어, 기계적 자극의 세기는 세포 활성도에 영향을 미칠 것으로 사료된다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2010년도 춘계학술발표대회 초록집
• /
• pp.58-58
• /
• 2010

The purpose of this study is to evaluate the structural safety at the topside weldment of hull structure, which was welded after launching. For it, the variations of residual stress and distortion at the topside weldment with loading conditions such as hull girder hogging bending moment after launching and free initial loading state was evaluated by using FEA. And the maximum stress range at the weldment under design loads specified by classification society was evaluated by FEA. In this case, the residual stress and welding distortion at the topside weldment was assumed to be initial imperfection. In accordance with FEA results, regardless of initial loading condition, tensile residual stress was found. However, the residual stress and welding distortion at the topside weldment produced under hogging condition was less than those of topside weldment under free loading state. That is, the amount of residual stress at the topside weldment decreased with an increase in the amount of tension load caused by hogging condition. It was because the compressive thermal strain at the topside weldment produced during welding was reduced by tensile load. However, the maximum stress range at the topside weldment under maximum hull girder bending moment was almost similar regardless of initial loading condition. So, if the problem related to the soundness of weldment is not introduced by initial load, the effect of initial loading condition during welding on fatigue strength of topside weldment could be negligible.

• 한국도로학회논문집
• /
• 제11권4호
• /
• pp.87-94
• /
• 2009

콘크리트 슬래브는 타설 후 온도와 수분 변화를 통해 체적이 변화한다. 수분증발에 의하여 발생한 건조수축은 슬래브의 자중이나 하부층과의 마찰 등에 의하여 구속되어 슬래브 내부에 응력이 유발된다. 선행 연구에 의하면 건조수축에 의하여 발생된 실제 인장응력은 이론적으로 예측된 값보다 작은 것으로 보고되었다. 이는 부분적으로 구속된 슬래브에서 발생하는 초기 재령 콘크리트의 점탄성에 기인한 응력감소 현상이다. 본 연구에서는 재령에 따른 콘크리트의 응력감소 현상을 조사하기 위하여 구속된 원주형, 구속되지 않은 자유건조 원주형, 그리고 자유건조 각주형 콘크리트 시편의 변형률을 측정하였다. 재령 1, 3, 7, 14, 28일에 콘크리트의 탄성계수를 측정하였으며 관입저항 실험을 실시하였다. 실험결과를 기존 연구자들이 제안한 이론식에 대입하여 구속된 원주형 콘크리트 시편의 응력감소를 계산할 수 있었다. 향후 본 연구의 결과를 바탕으로 구속된 콘크리트 시편의 응력감소 현상을 콘크리트 포장의 설계에 적용할 예정이다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.132-136
• /
• 2009

The importance and interests for saving of energy and cost in industry has been steadily grown up. Therefore, process optimization to reduce the processing step and energy is one of the most important things. The micro-alloyed steel of which post-heat-treatment is not necessary, has attractive points for high strength materials. However, for the application of non-heat-treated steel to structural parts, it is necessary to confirm the reliability of mechanical properties. In order to estimate mechanical properties. The microstructure, hardness, tensile strength, compressive strength and tensile fatigue strength of micro-alloyed steel having 900MPa tensile strength has been investigated.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.591-596
• /
• 2001

In case of continuous steel box-girder bridges, the magnitude of the longitudinal tensile stress on concrete in internal support is larger than the tensile strength of concrete. In this paper, the parametric study was performed to present the effective magnitude of the longitudinal prestress for reducing the longitudinal tensile stress to decrease under the tensile strength of concrete. The parametric study is conducted with changing the steel box-girder section and the span length of bridge. Three dimensional finite element analyses are conducted with ABAQUS program. The behavior of the steel box-girder bridge with prestress is investigated through experimental works on a analogous steel box-girder bridge model, and their results are compared with those of analytical studies.

• 한국자기학회지
• /
• 제3권1호
• /
• pp.61-64
• /
• 1993

비정질 세선(amorphous wite)의 인장응력(tensile strees)에 대한 자기적 특성의 변화를 측정하기 위하여 자화 주파수 범위가 1~20 kHz, 인장응력의 범위가 0~20인 N인 비정질 세선용 교류자 기이력곡선특성 측정장치를 제작하였다. 제작된 교류자기이력곡선 측정장치를 이용하여 비정질 세선의 인장응력에 따른 자기적 특성 (최대자기유도 $B_{max}$, 잔류자기 유도 $B_{r}$, 보자력 $H_{c}$)을 1% 의 정밀도로 측정할 수 있었다.

• 대한기계학회논문집A
• /
• 제24권12호
• /
• pp.3033-3039
• /
• 2000

Mechanical properties of the materials used for transportations and industrial machinery under high stain rate loading conditions have been required to provide appropriate safety assessment to these mechanical structures. The Split Hopkinson Pressure Bar(SHPB) technique with a special experimental apparatus can be used to obtain the material properties under high strain rate loading condition. There have been many studies on the material behavior under high strain rate compressive loading compared to those under tensile loading. In this paper, mechanical properties of the aluminum alloy, Al6061-T6, under high strain rate tensile loading were determined using SHPB technique.