• Korean Journal of Medicinal Crop Science
• /
• v.9 no.1
• /
• pp.1-7
• /
• 2001

This experiment was carried out to investigate the effects of shading treatments and harvesting methods on the growth of Eleutherococcus senticosus, which was known as the medicine of anticancer, anti-stress, hepatic detoxification activity, immunoactivity, and tonic. Light transmission ratio and air temperature were decreased as $40{\sim}64%$,$1.9{\sim}2^{\circ}C$, respectively, in 30% to 70% shading net treatment compared to non-shading. Fifty percentage shading net treatment was effective for the growth and yield of Eleutherococcus senticosus. During summer Eleutherococcus senticosus was growing under shading net treatment compared to non-shading. Tunnel type was more effective for growth than vertical type in shading method. 30cm length included 2 to 3 nodes cutting from soil surface was the most effective for branching stem length, plant height and yield as harvesting methods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.62-68
• /
• 2016

The feeder cable assembly is an automotive part used for telecommunication. If it malfunctions, the control and safety of the automobile can be put at risk. ALT (Accelerated Life Testing) is a testing process for products in which they are subjected to conditions (stress, strain, temperatures, etc.) in excess of their normal service parameters in an attempt to uncover faults and potential modes of failure in a short amount of time. Failure is caused by defects in the design, process, quality, or application of the part, and these defects are the underlying causes of failure or which initiate a process leading to failure. Thermal shock occurs when a thermal gradient causes different parts of an object to expand by different amounts. Thermal shock testing is performed to determine the ability of parts and components to withstand sudden changes in temperature. In this research, the main causes of failure of the feeder cable assembly were snapping, shorting and electro-pressure resistance failure. Using the Coffin-Manson model for ALT, the normal conditions were from Tmax = $80^{\circ}C$ to Tmin = $-40^{\circ}C$, the accelerated testing conditions were from Tmax = $120^{\circ}C$ to Tmin = $-60^{\circ}C$, the AF (Acceleration Factor) was 2.25 and the testing time was reduced from 1,000 cycles to 444 cycles. Using the Bxlife test, the number of samples was 5, the required life was B0.04%.10years, in the acceleration condition, 747 cycles were obtained. After the thermal shock test under different conditions, the feeder cable assembly was examined by a network analyzer and compared with the Weibull distribution modulus parameter. The results obtained showed good results in acceleration life test mode. For the same reliability rate, the testing time was decreased by a quarter using ALT.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.247-253
• /
• 2019

3D printing technology has attracted considerable attention because of its potential to fabricate the intricate design of ceramic products. In this study, ceramic 3D nozzle printing was introduced to manufacture complex alumina products with a ceramic pigment. The alumina paste was formulated by incorporating an elastomer to impart viscoelastic properties. Viscoelastic pastes play an essential role in ceramic 3D nozzle printing. The effects of the viscoelastic properties of the ceramic pastes on their printability were assessed using comprehensive rheological analysis, and various shapes were printed. As a result, the paste with a high yield stress showed better printability. In addition, a ceramic pigment was added to the developed pastes to increase the aesthetics of the printed ceramic structure. The printed ceramic parts were sintered in air at 1300 ℃. The stability of the ceramic pigment was confirmed even after high-temperature sintering.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.55 no.4
• /
• pp.284-291
• /
• 2010

A simulation modeling for predicting the harvesting date with high potato solids consists of development of mathematical models. The mathematical model on potato growth and its development should be obtained by using agricultural elements which analyze relations of solar radiation quantity, temperature, photon quantity, carbon dioxide exchange rate, water stress and loss, relative humidity, light intensity, and wind etc. But more reliable way to predict harvesting date against climatic change employs in vivo energy consumption for growth and induction shape in a slight environmental adaptation. Therefore, to calculate in vivo energy loss, we take a concept of estimate of the amount of basal metabolism in each tuber on the basis of $Wm={\int}^m_tf(x)dt$ and $Tp=\frac{Tm{\cdot}Wm^{Tp}}{Wm^{Tm}}$. In the validation experiments, results of measuring solid accumulation of potato harvested at simulated date agreed fairly well with the actual measured values in each regional field during the growth period of 2005-2009. The calculation method could be used to predict an appropriate harvesting date for a production of high potato solids according to weather conditions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.120-120
• /
• 1998

Boron nitride (BN) films have attracted a growing interest for a variety of t technological applications due to their excellent characteristics, namely hardness, c chemical inertness, and dielectrical behavior, etc. There are two crystalline phases 1551; of BN that are analogous to phases of carbon. Hexagonal boron nitride (h-BN) has a a layered s$\sigma$ucture which is spz-bonded structure similar to that of graphite, and is t the stable ordered phase at ambient conditions. Cubic boron nitride (c-BN) has a z zinc blende structure with sp3-bonding like as diamond, 따ld is the metastable phase a at ambient conditions. Among of their prototypes, especially 삼Ie c-BN is an i interesting material because it has almost the same hardness and thermal c conductivity as di없nond. C Conventionally, significant progress has been made in the experimental t techniques for synthesizing BN films using various of the physical vapor deposition 밍ld chemical vapor deposition. But, the major disadvantage of c-BN films is that t they are much more difficult to synthesize than h-BN films due to its narrow s stability phase region, high compression stress, and problem of nitrogen source c control. Recent studies of the metalorganic chemical vapor deposition (MOCVD) of I III - V compound have established that a molecular level understanding of the d deposition process is mandatory in controlling the selectivity parameters. This led t to the concept of using a single source organometallic precursor, having the c constituent elements in stoichiometric ratio, for MOCVD growth of 삼Ie required b binary compound. I In this study, therefore, we have been carried out the growth of h-BN thin f films on silicon substrates using a single source precursors. Polycrystalline h-BN t thin films were deposited on silicon in the temperature range of $\alpha$)() - 900 $^{\circ}$C from t the organometallic precursors of Boron-Triethylamine complex, (CZHs)3N:BRJ, and T Tris(dimethylamino)Borane, [CH3}zNhB, by supersonic molecular jet and remote p plasma assisted MOCVD. Hydrogen was used as carrier gas, and additional nitrogen w was supplied by either aDlIDonia through a nozzle, or nitrogen via a remote plasma. T The as-grown films were characterized by Fourier transform infrared spectroscopy, x x-ray pthotoelectron spectroscopy, Auger electron spectroscopy, x-ray diffraction, t transmission electron diffraction, optical transmission, and atomic force microscopy.roscopy.

• Korean Journal of Weed Science
• /
• v.8 no.3
• /
• pp.299-307
• /
• 1988

Several experiments were conducted to investigate the effects of external factors on germination and emergence of Eclipta prostrata (L.)L. The weight of viable achenes doubled as a result of 90 minutes soaking in water. The germination of E. prostrata was significantly improved by alternating temperatures. At a constant temperature of $35^{\circ}C$, only 78% of the achenes germination, whereas at alternating temperatures of 35/$20^{\circ}C$, 96.5% of the achenes germinated. E. prostrata was more sensitive than rice to moisture stress. No germination of E. prostrata achenes occurred in the absence of oxygen. No germination of E. prostrata achenes occurred in the dark or when they were exposed to green, blue, and far-red light. Germination of E. prostrata achenes was influenced by the duration of illumination after absorption of water. Ten hours of illumination was needed for maximum germination and 2 hours for 50% germination. No significant changes in germination of E. prostrata achenes were observed between pH 3 and 10. A high tolerance of E. prostrata achenes to salt was observed. Emergence of E. prostrata achenes was greatly affected by planting depth. In the upland soil, 74.0% of the achenes planted on the soil surface germinated, and no emergence was at planting depths of 0.5 cm or greater.

• International Journal of Highway Engineering
• /
• v.10 no.4
• /
• pp.9-18
• /
• 2008

Curling is caused by the difference in the temperature and humidity by the depth of the slab in Jointed Plain Concrete Pavement. Slab curvature shape and size change due to curling exert a profound influence on the internal stress and roughness of the pavement, affecting structural and functional performance of the pavement. Direct measurement of the slab curvature entails many problems. Many measuring instruments have to be installed at the early-stage of the pavement construction, and the behavior of the slab curvature needs to be measured accurately from the early-stage. Moreover, the cost and technical difficulty are very formidable to measure the slab curvature. This study develops a measurement method for slab curvature in jointed concrete pavement at any given time by applying Power Spectrum Density Analysis and Inverse Fast Fourier Transformation to the profile data, that can be easily obtained at the construction field site. The effectiveness of this developed method is verified by measuring the profile data of the test road of jointed concrete pavement at an inland central expressway by the hour and by examining the result of extracting the slab curvature shape from this profile data. Additionally, the profile data of CRCP(Continuously Reinforced Concrete Pavement) sections on the same expressway were obtained and analyzed at the same time. The validity of the method developed for the slab curvature shape extraction is verified by comparing the result from the analysis of the profile data of CRCP sections with that from the analysis of the prof1Ie data of jointed concrete pavement sections.

• Korean Journal of Organic Agriculture
• /
• v.20 no.3
• /
• pp.345-356
• /
• 2012

We conducted a survey of actual using conditions of farm-made liquid fertilizers by investigating their formulation types, materials, making processes, using methods and various beneficial effects on 29 farms certified by National Agricultural Products Quality Management Service to produce environment-friendly agricultural products in 2009. Most of the materials used to make liquid fertilizers are those that can be easily obtained around the farms. Molasses or black sugar are added as an energy source of microorganism. And leaf mold, bacterial cultures supplied by agricultural extension centers of local governments, and cultures of native microorganisms were used as microbial sources for fermenting effective microorganisms. Types of the farm-made liquid fertilizers were fermented liquid fertilizers, fermented plant juices, amino acid liquid fertilizers, calcium-liquid fertilizers, and phosphoric acid liquid fertilizers. Effects of liquid fertilizers used by the farms were found to promote plant growth by supplying nutrition, to accelerate blooming and flower bud formation, to enhance the quality of agricultural products such as increase of sugar contents and improvement of storing conditions, to induce resistance against diseases and insect pests, and to cause endurance to high temperature stress. Chemical properties of the liquid fertilizers collected were analyzed. As a result, pH and EC range showed differences according to kinds of the liquid fertilizers. Amount of macro-nutrients, such as nitrogen and phosphoric acid, in most of the collected liquid fertilizers, was found to be low. Even though the liquid fertilizers were made from same materials, their contents was found to be different depending on the making process.

• Journal of Bio-Environment Control
• /
• v.10 no.3
• /
• pp.159-164
• /
• 2001

This study were conducted to investigate the influence of chilling on photosynthetic rate, root activity, contents of total sugars and fatty acids of cucumber seedlings grown in a greenhouse. Even though photosynthetic activity of seedlings exposed to $0^{\circ}C$ for 5 hours was little or insignificantly influenced, it was reduced by 52.8% and 67.7% in seedlings exposed to the same temperature for an extended 10 and 24 hours, respectively. Photosynthetic rate decreased significantly when seedlings were illuminated, as compared to continuously held under darkness, during 15 hours of chilling treatment at 3$^{\circ}C$. Recovery of photosynthetic ability was also retarded by illumination during a recovery period after chilling treatment. Root activity, as measured by the oxidation power of $\alpha$-naphtylamine, was significantly reduced by chilling treatment at 0 to 6$^{\circ}C$, but amount of bleeding xylem sap collected at 40 days after chilling treatment was not significantly different among treatments. Total sugar content increased by 12 and 23% as compared to the control in seedlings chilled for 24 hours, respectively, at 3$^{\circ}C$. Contents of unsaturated linolenic and oleic acids increased, while content of saturated palmitic acid decreased with chilling treatment.

• Journal of the Korean Magnetics Society
• /
• v.10 no.5
• /
• pp.237-245
• /
• 2000

Effects of B addition and heat treatment on the magnetic and magnetostrictive properties of amorphous SmFe$_2$ thin films are investigated. A significant improvement in the magnetostrictive properties at low magnetic fields is observed with the addition of B. This improvement, however, is achieved at a heavy cost of intrinsic properties such as saturation magnetostriction. For example, at a magnetic field of 30 Oe, magnetostriction of a thin film with a B content of 9.9 at.% is increased from 190 to 333 ppm, but saturation magnetostriction is decreased by more than 50 %. This result is in accord with the deterioration (reduction) of saturation magnetization and the improvement (reduction) of coercive force at this B content. The magnetostrictive properties are also improved by annealing and optimum annealing temperature is found to be in the range 300-400 $^{\circ}C$. The main reason for the improvement is mainly considered to be due to the reduction of coercive force caused by stress relief, not due to the ultrafine SmFe$_2$ precipitates which were originally expected to form by annealing.