• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.1
• /
• pp.26-33
• /
• 2013

BMI nozzles in bottom head of the nuclear vessel are one of major components in nuclear power plants. The BMI nozzles have high possibility to generate PWSCC(primary water stress corrosion crack) according to recent foreign case although operation temperature is lower then the upper head of the nuclear vessel. Thus, nondestructive inspection of the BMI nozzles is required. But, inspection of BMI nozzles is not easy since the BMI nozzles placed in high radiated area and inside the nozzles filled with boric acid. Thus, in this study, a TOFD transducer for inspection of BMI and automated scanner system with water were developed. Also, validation of performance of the developed transducer and system are performed using specimens with artificial defects.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.2
• /
• pp.307-315
• /
• 1989

In recent years, the fatigue design method by analysis for the mechanical components and the welded structures has much increased, instead of the fatigue design method by rule that has been widely used from the past days. When a fatigue design is conducted by that method, the basic informations, fatigue life curves are mainly obtained from the results of the strain controlled low cycle fatigue test. From these point of views, the low cycle fatigue test is coming to be given a much importance lately. In this paper, the strain controlled low cycle fatigue properties at room temperature in air environment were investigated for the low carbon forged steel, SF45A, and the rolled steel for the welded structure, SM 41B. Throughout the test, strain ratio, R, was maintained constant with the fully reversed condition, -1. As the experimental results, the cyclic stress-strain behaviours of the test materials were different each other, but the low cycle fatigue life-time of them appeared to show little difference in the region of this test conditions.

• The Korean Journal of Rheology
• /
• v.9 no.4
• /
• pp.174-182
• /
• 1997

결정성 고분자수지는 가공조건에 의해 결정되는 미세구조의 변화에 따라 최종물성 이 현저히 달라지므로 최종 성형품의 물성을 극대화하기 위해서는 성형가공 중에 필연적으 로 부가되는 열이력 뿐만 아니라 전단이력이 결정화 거동에 미치는 영향을 규명하고 가공조 건의 최적화를 통하여 미세구조를 적절히 제어하는 것이 요구된다. 따라서 본 연구에서 in-situ 상태로 전단유도 결정화거동을 조사할수 있는 rheo-kinetic 실험 방법을 개발하고 결정화 거동에 미치는 열이력과 전단이력의 영향을 규명하고자 하였다. 이를 위해 비교적 결정화 속도가 빠른 폴리 부틸렌 테레프탈레이트 수지를 대상으로 냉각조건, 전단부가시간, 전단속도등을 다양하게 변화시키면서 plate-plate 레오미터로 시간에 따른 전단응력의 변화 를 조사하는 rheo-kinetic 연구를 수행하였다. 아울러 실험 중에 액체 질소로 급냉하여 얻은 시료를 대상으로 등온 및 비등온의 열분석 실험을 수행하고 JMA식과 Hoffman-Lauritzentlr 을 사용하여 분석한 다음, 그 결과를 rheo-kinetic 해석결과와 비교함으로써 결정화 거동에 미치는 전단응력의 영향을 규명하였다. 일정전단속동하에서 수행한 rheo-kinetic 실험결과, 시간에 따른 저난응력의 증가와 용융열이 증가하는 경향이 매우 유사한 거동을 보이므로 전 단응력의 증가는 결정화가 일어남에 기인한 결과임을 확인할수 있었으며 고분자수지가 전단 이력을 받게 되면 분자배향의 결과로 결정화 유도시간이 짧아지고 결정화속도가 증가할 뿐 만 아니라 보다 더 높은 온도에서 결정화가 일어나게 됨을 알수 있었다. 또 결정화 반가기 시간과 Hoffman-Lauritzen 식의 매개변수들이 전단속도, 전단부가시간, 결정화 온도 등의 이력에 무관하게 전단응력에 따라 선형적으로 변하고 있으므로 전단유도 결정화거동은 수지 에 부가되는 전단응력에 직접적인 영향을 받음을 알수 있었다. 이상과같은 전단유도 결정화 거동에 관한 결과를 가공공정상의 열전달 현상과 결합하여 해서하면 성형품 내부의모폴로지 의 예측이 가능하므로 성형품 물성의 극대화 방안의 수립에 이용될수 있을것으로 사료된다.

• Journal of Korean Society on Water Environment
• /
• v.31 no.3
• /
• pp.235-240
• /
• 2015

To evaluate the unit load generation and discharge, pig cage test was conducted. Feed intake, drink amount, and urine generation increased growth stage (heavy weight) of the pig more great. However, the sum of the urine and manure did not show a significant difference in the growth stages of pigs. Because of the limit of the experiment, e.g., research period, high pigpen temperature, breed-related stress and etc., it could not be derived the results of the four seasons. Therefore, in order to generalize the results, the feed intakes were calibrated using a NRC (National Research and nutritional requirements of pigs from the Commission) standards. The finalized unit load generation and generation amounts of manure and urine were estimated at BOD 104.1 g/head/d, T-N 21.2 g/head/d, T-P 4.9 g/head/d, manure 0.96 L/d, urine 1.66 L/d with consideration of revised feed intake. Compare to the former research results of MOE (Ministry of Environment, 1999) and NIAS (National Institute of Animal Science, 2008), the generation amounts of manure and urine were similar to the NIAS's values. In case of unit load generation, BOD and T-N were almost similar in all of them. However, the T-P unit load generation of MOE was more difference, e.g., 2.5 times high, compare to this study.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.4
• /
• pp.367-372
• /
• 2010

A power plant's heat exchangers work under poor conditions, such as high temperature, high pressure, corrosion, mechanical stress and vibration. Especially, partial joint-weld of heat exchanger's header to stub-tube is the place where incomplete penetration flaws can easily occur. But, it is hard to evaluate the safety of the structure by conventional nondestructive testing techniques. So it is necessary to test integrity of the weld inside and to develop testing technique and equipment that can detect the flaws at the weld point in order to enhance reliability of the test result. In this study, we developed a suitable automated ultrasonic testing system that can inspect the partial joint-weld of header to stub-tube of power plant. Finally, we showed the efficiency of the automated ultrasonic-testing-system from the application.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.3
• /
• pp.72-78
• /
• 2007

A diesel particulate filter causes progressive increase in back pressure of an exhaust system due to the loading of soot particles. To maintain the pressure drop caused by DPF under proper level, a regeneration process is mandatory when excessive loading of soot is detected in the filter. It is a major reason why the relation between the amount of soot and the pressure drop in a DPF becomes crucial. On the other hand, pressure drop varies with not only the soot loading but also conditions of exhaust gas such as mass flow rate. Therefore, the relation among them becomes complicated. Furthermore, the characteristics of heat transfer in a DPF is another crucial parameter in order for the filter to avoid thermal crack during regeneration period. This study presents characteristics of pressure drop under various conditions of soot loading and mass flow rate in catalyzed diesel particulate filter. This study also shows characteristics of heat transfer in DPF when high temperature gas flows into the filter. Experiments reveal that the soot loading and mass flow rate affect characteristics pressure drop independently. Experiments also indicate that the amount of coating material has little influence on pressure drop with changes in soot loading and mass flow rate. However, increased catalyst coating may lead to the improved heat transfer which is efficiency to reduce thermal stress of the filter.

• Journal of Animal Science and Technology
• /
• v.62 no.3
• /
• pp.356-364
• /
• 2020

The reproductive performance of lactating sows was investigated by using different feeding methods including conventional feeding (CF, 3 times/d) or free feeding (FF), and different dietary energy level including low energy (LE: 3,300) or high energy (HE: 3,400 kcal/kg) during the hot season. A total of twenty-eight crossbred (Yorkshire × Landrace) sows were distributed into four treatments as a 2 × 2 factorial arrangement. Sows in the FF group showed lower body weight and backfat loss (p < 0.05) compared with the CF group. Backfat loss during lactation was lower (p < 0.05) in sows fed HE diet than in that fed LE diet. There were no significant differences in litter survival rate and weaning to estrus interval, but the litter weight at weaning was improved (p < 0.05) in FF and HE sows. Hence, it is concluded that using the free-feeding system or increased dietary energy density leads to improved sow performance during hot ambient temperature.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.13 no.2
• /
• pp.75-83
• /
• 2017

In severe accident conditions of light water reactors, the loss of coolant may cause problems in integrity of zirconium fuel cladding. Under the condition of the loss of coolant, the zirconium fuel cladding can be exposed to high temperature steam and reacted with them by producing of hydrogen, which is caused by the failure in oxidation resistance of zirconium cladding materials during the loss of coolant accident scenarios. In order to avoid these problems, we develop a multi-metallic layered composite (MMLC) fuel cladding which compromises between the neutronic advantages of zirconium-based alloys and the accident-tolerance of non-zirconium-based metallic materials. Cold pilgering process is a common tube manufacturing process, which is complex material forming operation in highly non-steady state, where the materials undergo a long series of deformation resulting in both diameter and thickness reduction. During the cold pilgering process, MMLC claddings need to reduce the outside diameter and wall thickness. However, multi-layers of the tube are expected to occur different deformation processes because each layer has different mechanical properties. To improve the utilization of the pilgering process, 3-dimensional computational analyses have been made using a finite element modeling technique. We also analyze the dimensional change, strain and stress distribution at MMLC tube by considering the behavior of rolls such as stroke rate and feed rate.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.55-55
• /
• 2018

Recently, amorphous oxides such as InGaZnO (IGZO) and InZnO (IZO) as a channel layer of an oxide TFT have been attracted by advantages such as high mobility, good uniformity, and high transparency. In order to apply such an amorphous oxide TFTs to a display, the stability in various environments must be ensured. In the InGaZnO which has been studied in the past, Ga elements act as a suppressor of oxygen vacancy and result in a decreased mobility at the same time. Previous studies have been showed that the InZnO, which does not contain Ga, can achieve high mobility, but has relatively poor stability under various instability environments. In this study, the TFTs using $IZO/Al_2O_3$ double layer structure were studied. The introduction of an $Al_2O_3$ interlayer between source/drain and channel causes superior electrical characteristics and electrical stability as well as reduced contact resistance with optimally perfect ohmic contact. For the IZO and $Al_2O_3$ bilayer structures, the IZO 30nm IZO channels were prepared at $Ar:O_2=30:1$ by sputtering and the $Al_2O_3$ interlayer were depostied with various thickness by ALD at $150^{\circ}C$. The optimal sample exhibits considerably good TFT performance with $V_{th}$ of -3.3V and field effect mobility of $19.25cm^2/Vs$, and reduced $V_{th}$ shift under positive bias stress stability, compared to conventional IZO TFT. The enhanced TFT performances are closely related to the nice ohmic contact properties coming from the defect passivation of the IZO surface inducing charge traps, and we will provide the detail mechanism and model via electrical analysis and transmission line method.

• Journal of the Korean Society of Safety
• /
• v.21 no.1 s.73
• /
• pp.92-95
• /
• 2006

This study is to find out how column with hole is behaved, compared to the normal one without hole. There might be existing buildings to make holes in the reinforced concrete column. Columns are made with commercially used compressive strength $240kg/cm^{2}$, air amount 5.0%, using re-bar of diameter D13 and D10 having yielding stress $4,000kg/cm^{2}$. The specimen were cured with temperature of $21{\pm}3^{\circ}C$. All specimens of five variables and all holes are geometrically considered and configurated. D3, D5 mean diameter 3cm and 5cm respectively. H1, H2 are the number of holes. Compressive pressure was forced in accordance with KS, following $0.6{\pm}0.4N/mm^{2}$ speed. Main re-bar's were strained with almost same shape through all the specimens. Hole diameter 5cm-having specimen showed cracking around hole. strains of back and front gauges of the specimen were showed similarly. Specimen having two holes in left and right from longitudinally axis resisted 7% less than the one having hole centrically from longitudinal axis. One hole having specimen with diameter 5cm resisted only 3% less than in case of 3cm diameter hole. Hole having in left and right from longitudinal axis will be less resistant than the case longitudinally arranged. Diameter 3cm hole showed less 10% capacity than normal one without hole. Capacity loss difference between diameter 3cm and 5cm showed almost none in case that they are arranged longitudinally.