• Journal of Environmental Science International
• /
• v.23 no.2
• /
• pp.303-312
• /
• 2014

As for chemical characteristics of cultivated media waste, the total content of nitrogen, phosphoric acid, and potassium was 6.93%; organic matter content was 67.78%; pH and EC were 7.20 and 1.46 ds/m, respectively. Organic acids identified during stabilization included citric acid, oxalic acid, fumaric acid, and acetic acid, which was highest. During the stabilization of cultivated media waste, temperature decreased and pH increased on the 15th day, and the germination index was 88 after the period, indicating that at least 15 days of stabilization is needed when cultivated media waste is used for growth material of crop. As for germination characteristics, when the mixture rate of cultivated media waste was 20% and under, germination of cucumber and oriental melon was favorable without difference compared to the control plots. For lettuce and Chinese cabbage, no statistically significant difference was found when the rate was 10% and under compared to the control plots. As for seedling quality after 20 days of sowing, cucumber, oriental melon, and Chinese cabbage showed favorable growth only when the mixture rate of cultivated media waste was 10% and under; lettuce showed lower growth characteristics regardless of mixture rate when compared to the control plots. Cultivated media waste may be significantly useful for cucumber and oriental melon, but not for Chinese cabbage and lettuce.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.10
• /
• pp.788-792
• /
• 2010

The yttrium-barium-copper-oxide (YBCO) coated conductor, which supplement the fault of the existing superconducting current-limit materials YBCO thin film, bismuth-strontium-calcium-copper-oxide(BSCCO) wire and bulk, has been improved its mechanical weakness and has high index; hence, after quench YBCO coated conductor could limit the fault current effectively because of fast resistance occurrence speed. Furthermore, it has wide applicable area as an current limit material because it shows different resistance occurrence tendency by the thickness and kind of stabilization material sputtered on the superconducting layer. Therefore, many researchers are carrying out the study of application of YBCO coated conductor to superconducting fault current limiter (SFCL) for making high quality current limit element, based on resistance type. On the other hand, the study for other type except resistance type has been rarely conducted for the application of YBCO coated conductor to SFCL as an current limit element. Consequently, in this study, YBCO coated conductor with different stabilization layer Cu and Stainless steel, is applied to SFCL using iron core and coil, and examine the many index points as an current limit element, such as current limit characteristic, the tendency of resistance occurrence, response time, the temperature trend for stability.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.7
• /
• pp.1077-1085
• /
• 2010

With an emphasis on its thermal behavior with different pHs and salts, the kinetic and thermodynamic parameters of the purified polygalacturonase (PG) from E. carotovora subsp. carotovora (Ecc) BR1 were studied, as the characterization of an enzyme is significant in the context of burgeoning biotechnological applications. The thermodynamic parameters for polygalacturonic acid hydrolysis by the purified PG were ${\Delta}H^*$=7.98 kJ/mol, ${\Delta}G^*$=68.86 kJ/mol, ${\Delta}S^*$=-194.48 J/mol/K, ${\Delta}G_{E-S}$=-1.04 kJ/mol, and ${\Delta}G_{E-T}$=-8.96 kJ/mol. In addition, its turnover number ($k_{cat}$) was 21/sec. The purified PG was stable within a temperature range of $20-50^{\circ}C$ and was deactivated at $60^{\circ}C$ and $70^{\circ}C$. The thermodynamic parameters (${\Delta}H^*$, ${\Delta}G^*$, ${\Delta}S^*$) for the irreversible inactivation of the PG at different temperatures ($30-60^{\circ}C$) were determined, where the effectiveness of various salts and different pHs (4-8) for the thermal stability of the PG were also characterized. The efficacy of various salts for the thermal stability of the PG was in the following order: $MgCl_2$ > $BaCl_2$ > KCl > $CaCl_2$ >NaCl. Therefore, the present work presents the biochemical, substrate hydrolysis thermodynamics and the thermal stabilization parameters of the PG from Ecc.

• BMB Reports
• /
• v.41 no.1
• /
• pp.62-67
• /
• 2008

The present study was aimed to elucidate the mechanism of stabilization of tubulin by deuterium oxide ($D_2O$). Rate of decrease of tryptophan fluorescence during aging of tubulin at 4$^{\circ}C$ and 37$^{\circ}C$ was significantly lower in $D_2O$ than in $H_2O$. Circular dichroism spectra of tubulin after incubation at 4$^{\circ}C$, suggested that complete stabilization of the secondary structure in D2O during the first 24 hours of incubation. The number of available cysteine measured by DTNB reaction was decreased to a lesser extent in $D_2O$ than in $H_2O$. . During the increase in temperature of tubulin, the rate of decrease of fluorescence at 335 nm and change of CD value at 222 nm was lesser in $D_2O$. Differential Scanning calorimetric experiments showed that the $T_m$ values for tubulin unfolding in $D_2O$ were 58.6$^{\circ}C$ and 62.17$^{\circ}C$, and in $H_2O$. those values were 55.4$^{\circ}C$ and 59.35$^{\circ}C$.

• Preventive Nutrition and Food Science
• /
• v.20 no.2
• /
• pp.119-125
• /
• 2015

The biologically active compounds raphasatin and sulforaphene are formed during the hydrolysis of radishes by an endogenous myrosinase. Raphasatin is very unstable, and it is generated and simultaneously degraded to less active compounds during hydrolysis in aqueous media. This study determined the hydrolysis conditions to maximize the formation of raphasatin and sulforaphene by an endogenous myrosinase and minimize their degradation during the hydrolysis of radish roots. The reaction parameters, such as the reaction medium, reaction time, type of mixing, and reaction temperature were optimized. A stability test for raphasatin and sulforaphene was also performed during storage of the hydrolyzed products at $25^{\circ}C$ for 10 days. The formation and breakdown of raphasatin and sulforaphene in radish roots by endogenous enzymolysis was strongly influenced by the reaction medium, reaction time, and type of mixing. The production and stabilization of raphasatin in radishes was efficient in water and dichloromethane with shaking for 15 min at $25^{\circ}C$. For sulforaphene, the favorable condition was water as the reaction medium without shaking for 10 min at $25^{\circ}C$. The maximum yields of raphasatin and sulforaphene were achieved in a concurrent hydrolysis reaction without shaking in water for 10 min and then with shaking in dichloromethane for 15 min at $25^{\circ}C$. Under these conditions, the yields of raphasatin and sulforaphene were maximized at 12.89 and $1.93{\mu}mol/g$ of dry radish, respectively. The stabilities of raphasatin and sulforaphene in the hydrolyzed products were 56.4% and 86.5% after 10 days of storage in water and dichloromethane at $25^{\circ}C$.

• The Journal of Engineering Research
• /
• v.2 no.1
• /
• pp.139-145
• /
• 1997

The effect of Ba addition on the thermal stabilization of $\gamma$-$Al_2O_3$ powders were studied. Ba additive was introduced into $\gamma$-$Al_2O_3$ powders by wet impregnation of $Ba(No_3)_3$.$6H_2O$. Ba additive was proved to be effective on the thermal stabilization of $\gamma$-$Al_2O_3$ powders by suppression of sintering. The optimum content of Ba was determined by 5 mol%, through the calcinations temperature range. It is suggested that the main reason of thermal stabilizaton is the substitution effect of large $Ba^{2+}$ ions into the $\Al^{3+}$ sites, which suppressed the surface diffusion of $\Al^{3+}$ ions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.859-865
• /
• 2010

We have designed and assembled a saturated absorption-spectroscopy system of $^{127}I_2$ for the frequency stabilization of the 543 nm He-Ne laser. The frequency of a internal-mirror 543 nm He-Ne laser was swept by utilizing the temperature and PZT change of the laser cavity length. Frequency modulation was applied to the output laser mirror with a PZT modulator for the third harmonic signal. A portion of the hyperfine spectrum originated from the R(12)26-0 and R(106)28-0 transitions of the B-X system of $^{127}I_2$ was observed as the third-derivative signal using a saturated absorption spectroscopy. The signal-to-noise ratio of a typical hyperfine spectrum signal was estimated to be 30:1.

• Journal of Radiation Industry
• /
• v.6 no.1
• /
• pp.55-59
• /
• 2012

Polyacrylonitrile (PAN)-based carbon fibers have been widely used due to their unique chemical, electrical, and mechanical properties. Electron beam irradiation has been extensively employed as means of altering properties of polymeric materials. Electron beam irradiation can induce chemical reactions in materials without any catalyst. Electron beam irradiation may be useful in accelerating the thermal compression stabilization of PAN nanofibers. To investigate the irradiation effect on PAN fibers, PAN nanofibers were irradiated by electron beam at 1,000~5,000 kGy. Irradiated and non-irradiated PAN nanofibers were heated at 180 and $220^{\circ}C$ without applying pressure for 15 min. Then 1 metric ton has been applied for 5 min. SEM images have been found that the fiber kept its morphological behavior after the hot pressing up to electron beam irradiated 1,000 kGy. DSC thermograms showed that the peak temperatures of the exothermic reactions were found to decrease with increasing electron beam irradiation doses and temperature. FT-IR spectra have been found to decrease $C{\equiv}N$ stretch band with increasing the electron beam irradiation dose. These results indicate that the modification of PAN via reactions such as cyclization is significantly enhanced by electron beam irradiation and thermal compression technique.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.8
• /
• pp.1061-1070
• /
• 2003

A triple flame in a mixing layer was studied experimentally with concentration gradient and mean velocity by using a multi-slot burner, which can stabilize the lift-off flame. Flame stabilization condition, lift-off heights, and some other characteristics were examined for methane and propane flame within a range of very low concentration gradient. Pitot-tube and LDV(Laser Doppler Velocimetry) were used for velocity. Mass spectroscopy and Rayleigh scattering signal were used for concentration gradients. Thermo-couples and SiC TFP(Thin Filament Pyrometer) were used for temperature. It was found that minimum values of the lift-off heights exist at a certain concentration gradient for constant mean velocity and this means that the propagation velocity has a maximum value. The scales of flame to the burner nozzle and intensity variation of the diffusion flame were suspected as the cause.

• Journal of the Korean Ceramic Society
• /
• v.32 no.3
• /
• pp.295-304
• /
• 1995

Stabilization of the perovskite phase and sequence of reactions occuring during calcination were studied with solid solutions formed between Pb(Zn1/3Nb2/3)O3 and Pb(Fe1/2Nb1/2)O3. In the PZN-PFN composition of equal molar ratio, rhombohedral type pyrochlore phase (Pb2Nb2O7) and PbO-rich distorted cubic type pyrochlore phase (Pb3Nb2O8) were coexisted as intermediate phases at temperatures below 85$0^{\circ}C$, and these phases transformed to a stable cubic type pyrochlore phase, Pb3Nb4O13 solid solution and a perovskite solid solution at temperatures above 85$0^{\circ}C$. The major stable phase as increasing sintering temperatures was a perovskite phase in this binary system and prominent suppression of the pyrochlore phase was achieved by substituting Zn2+ with Fe3+ or by increasing sintering temperature. The composition containing 20mol% PZN possessed the best dielectric properties, and the dissipation factor was lower than 5% in all compositions.