• Korean Journal of Poultry Science
• /
• v.44 no.1
• /
• pp.29-39
• /
• 2017

This study examined the effects of adding dried blood mixed with Macsumsuk to the feed of broiler chickens. The blood had been dried at $200^{\circ}C$ in an ultra-high-temperature injection system and mixed in a 70:30 proportion of blood meal to Macsumsuk. The experiment consisted of four treatment groups of 150 chickens each. The control group received common broiler feed only, while treatment groups T1, T2, and T3 received feed supplemented with 0.5, 1.0, and 3.0% of the blood meal/Macsumsuk mixture, respectively. The diets were fed for a total of 35 days. Compared with the controls, body weight gain was improved in groups T1 (1,621 g), T2 (1,749 g), and T3 (1,739 g) (1,621-1,749 g vs. 1,448.5 g, respectively) and feed efficiency increased (p<0.01). The carcass rate in group T3 was higher by 83.26% than that in the controls (75.96 %) (p<0.01). The water holding capacity (WHC) increased in groups T1 and T2 (62.27 and 63.80% respectively) compared with controls (p<0.01). The intestine length was longer in groups T1 and T2 (53.98-55.48) than in controls (45.81) (p<0.01). Adding 0.5-1.0% of the dried blood meal Macsumsuk supplement resulted in a significant reduction in the cholesterol content (39.28~47.34 mg/100 g) compared with the controls (50.44 mg/100 g) (p<0.001); furthermore, the proportions of fatty acids including oleic (C18:1n9), ${\gamma}-linoleic$ (C18:3n6), eicosenoic (C20:1n9), and arachidonic (C20:4n6) acids were significantly increased (p<0.01). Compared with controls, the proportion of unsaturated fatty acids (UFA), mono-unsaturated fatty acids (MUFA), and proportion of UFA / SFA in group T1 was (68.66 vs. 69.35%, 51.22 vs 52.00%, and 2.19 vs. 2.26%, respectively) (p<0.05). However, the amino acid content of cystine and methionine of the treatment group (0.43~0.57%) was significantly higher than that of controls (0.38~0.46%) (p<0.05). Overall, supplementing the feed with 0.5-1.0% of the mixture of blood meal Macsumsuk improved productivity by increasing weight gain and feed efficiency, improved meat quality by increasing the water-holding capacity and levels of unsaturated fatty acids, and improved meat color.

• Korean Journal of Weed Science
• /
• v.32 no.2
• /
• pp.85-97
• /
• 2012

To investigate the usefulness of freshwater alga Water-net (Hydrodictyon reticulatum, HR) as resources for production of fermentable sugars, the easiness of enzymatic saccharification was evaluated at first. When 6 plant materials (HR, Spirulina, Chlorella, Scenedesmus, Cladophora, Corn stover) were enzymatically hydrolyzed with 2% solid loading at the same condition, HR showed the highest ratio of saccharification based on glucose production. No milled HR was also completely saccharified at the amounts of optimal enzyme mixture. Glucose yield was not changed though the citrate buffer strength for saccharification was decreased from 0.1 M to 0.1 mM. Only about 10% yield reduction was observed compared to that of $120^{\circ}C$ treatment when HR was enzymatically hydrolyzed at room temperature. The saccharification was normally occurred at $37^{\circ}C$ and pH 6.5 which is general growth condition of fermentable microrganisms, suggesting that HR have a biomass characteristics applicable for the simultaneous saccharification and fermentation. The saccharification was occurred by more than 70~80% of one of the best condition although the supplied enzyme amounts was reduced to 1/10 volume. And the glucose yield by enzymatic hydrolysis was not decreased by 10% HR solid loading and began to decrease at more than 15% solid contents. Above these results show that HR is an interesting algal biomass which is relatively easy to be saccharified by hydrolyzing enzymes. In addition, HR is a flilamentous alga and very easy to be collected. Therefore, HR seems to be an useful and valuable resources in the economical production of fermentable sugars for manufacture of bio-chemical products.

• Journal of Food Hygiene and Safety
• /
• v.26 no.4
• /
• pp.366-369
• /
• 2011

In this study, the contamination levels of total aerobic bacteria, E. coli, total coliform and S. aureus of seasoned dried fishes (SDF) in Korea were investigated. A total of 81 SDF samples were purchased randomly from 28 stores. Contamination range of total aerobic bacteria, total coliform and S. aureus were 150~1,700,000, 10~31,000 and 10~220 CFU/g, respectively. E. coli was detected in only one samples in the qualitative test. We have analyzed quantitatively Staphylococcal enterotoxins (SE-type A, C and D) produced by S. aureus contaminated in SDF using a TECRA kit and standard curve. The curve equation was Y = 0.1499 * X + 0.1183 and maximum amount of SEs in SDF was 0.71 ng/ml. Reduction speed of S. aureus in SDF stored at $37^{\circ}C$ was the highest among the samples stored for 8 days at different temperature of 7, 18 and $37^{\circ}C$. On the basis of the results, SDF in Korea can be contaminated by a variety of pathogenic bacteria. Therefore, precautionary measures are necessary for consumer protection, including the improvement of sanitary conditions in the processing plants in Korea.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.5
• /
• pp.103-115
• /
• 2016

This study aims to analyze the properties of cold air production and its flow of Nakdong-Jeongmaek(mountain ranges), and to suggest management strategies for Nakdong-Jeongmaek in order to enhance the green air conditioning functions of Jeongmaek. For this purpose, three study sites including Gudeoksan Mountain and the vicinity in Busan, Goheonsan Mountain and the vicinity in Ulsan, and Unjusan Mountain and the vicinity in Pohang were selected. The results found that cold air flow and its height of the three study sites were analyzed based on topographic properties and land use. Management strategies for preserving and enhancing their temperature reduction functions were suggested. The cold air produced in the vicinity of Gudeoksan was not fully developed and spread because of the high-density development at the border of Jeongmaek. Since high pressures of development are expected at the border, high conservation policies are required. In the vicinity of Goheonsan, where the agricultural complex and industrial park are located, cold air flows well throughout the entire study site thanks to fully developed cold air in the wide, flat valley. Hence, plans to maintain the current cold air flow are required, and conservation plans to mitigate future developments are also needed in the flat valley. The cold air in Unjusan and the vicinity with its complex and narrow mountain valleys gradually develops into valley bottoms. In order to take advantage of the terrain, the valley near the cold air production areas are preserved. In particular, special plans are required to prevent damage to the cold air layer near Youngcheonho Lake, where the highest height of cold air was recorded due to the closed and lower terrain feature. This study could support the establishment of systematic management plans of Nakdong-Jeongmaek to preserve and enhance its green air conditioning functions.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.111-112
• /
• 2009

Diamond-like carbon (DLC) is a convenient term to indicate the compositions of the various forms of amorphous carbon (a-C), tetrahedral amorphous carbon (ta-C), hydrogenated amorphous carbon and tetrahedral amorphous carbon (a-C:H and ta-C:H). The a-C film with disordered graphitic ordering, such as soot, chars, glassy carbon, and evaporated a-C, is shown in the lower left hand corner. If the fraction of sp3 bonding reaches a high degree, such an a-C is denoted as tetrahedral amorphous carbon (ta-C), in order to distinguish it from sp2 a-C [2]. Two hydrocarbon polymers, that is, polyethylene (CH2)n and polyacetylene (CH)n, define the limits of the triangle in the right hand corner beyond which interconnecting C-C networks do not form, and only strait-chain molecules are formed. The DLC films, i.e. a-C, ta-C, a-C:H and ta-C:H, have some extreme properties similar to diamond, such as hardness, elastic modulus and chemical inertness. These films are great advantages for many applications. One of the most important applications of the carbon-based films is the coating for magnetic hard disk recording. The second successful application is wear protective and antireflective films for IR windows. The third application is wear protection of bearings and sliding friction parts. The fourth is precision gages for the automotive industry. Recently, exciting ongoing study [1] tries to deposit a carbon-based protective film on engine parts (e.g. engine cylinders and pistons) taking into account not only low friction and wear, but also self lubricating properties. Reduction of the oil consumption is expected. Currently, for an additional application field, the carbon-based films are extensively studied as excellent candidates for biocompatible films on biomedical implants. The carbon-based films consist of carbon, hydrogen and nitrogen, which are biologically harmless as well as the main elements of human body. Some in vitro and limited in vivo studies on the biological effects of carbon-based films have been studied [$2{\sim}5$].The carbon-based films have great potentials in many fields. However, a few technological issues for carbon-based film are still needed to be studied to improve the applicability. Aisenberg and Chabot [3] firstly prepared an amorphous carbon film on substrates remained at room temperature using a beam of carbon ions produced using argon plasma. Spencer et al. [4] had subsequently developed this field. Many deposition techniques for DLC films have been developed to increase the fraction of sp3 bonding in the films. The a-C films have been prepared by a variety of deposition methods such as ion plating, DC or RF sputtering, RF or DC plasma enhanced chemical vapor deposition (PECVD), electron cyclotron resonance chemical vapor deposition (ECR-CVD), ion implantation, ablation, pulsed laser deposition and cathodic arc deposition, from a variety of carbon target or gaseous sources materials [5]. Sputtering is the most common deposition method for a-C film. Deposited films by these plasma methods, such as plasma enhanced chemical vapor deposition (PECVD) [6], are ranged into the interior of the triangle. Application fields of DLC films investigated from papers. Many papers purposed to apply for tribology due to the carbon-based films of low friction and wear resistance. Figure 1 shows the percentage of DLC research interest for application field. The biggest portion is tribology field. It is occupied 57%. Second, biomedical field hold 14%. Nowadays, biomedical field is took notice in many countries and significantly increased the research papers. DLC films actually applied to many industries in 2005 as shown figure 2. The most applied fields are mold and machinery industries. It took over 50%. The automobile industry is more and more increase application parts. In the near future, automobile industry is expected a big market for DLC coating. Figure 1 Research interests of carbon-based filmsFigure 2 Demand ratio of DLC coating for industry in 2005. In this presentation, I will introduce a trend of carbon-based coating research and applications.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.4
• /
• pp.117-124
• /
• 2009

The purpose of the study was to improve quality of high volume fly ash concrete. The study evaluated on the possibility of early quality improvement of high volume fly ash concrete with early strength gain admixture ('GA' below) developed by the preceding research. The study regarded applying naphthalene admixture ('NA' below) to mix proportion substituting FA 15 % to be plain. In the event of substituting FA 20, 25 and 30 %, the study compared engineering properties of concrete with plain by applying GA. Because of features of fresh concrete, fluidity falls down when GA is applied. Therefore, its use amount shall be increased. Only, in W/B 60 %, it was beneficial since slump loss was reduced about 35~70 mm than plain. The study could see that AE use should be increased proportionally since air content was reduced by coming from AE absorption operation of unburned coal content included in FA according to an increase in the amount of FA use. Reduction effect of bleeding could be anticipated since the amount of bleeding appeared at least in FA 20 %. Because of hardened concrete, time of setting appeared in the same level as plain when GA was applied. Therefore, it is judged that delay of setting can be reduced. In compressive strength, the study could check the same strength development as plain when GA was applied, having nothing to do with W/B and curing temperature. However, it is thought that we shall pay attention to GA use in the event of FA 30 % substitution. Freezing and melting resistance had less early value than plain. However, it is judged that there will be no problem of frost resistance since there is no a large difference between freezing and melting resistance and plain in overall. In accelerated neutralization, it was analyzed that a problem of weakening in neutralization appointed as a demerit when FA was applied in mass in proportion with GA use could be settled to some extent.

• Horticultural Science & Technology
• /
• v.18 no.3
• /
• pp.321-326
• /
• 2000

To compare germinability of primed seeds with that of water imbibed and nonprimed seeds at different temperatures, percent germination, number of days to attain 50% of the final germination percentage (T50) and mean number of days to germination (MDG) were evaluated at various temperatures ranged from $10^{\circ}C$ to $35^{\circ}C$. Primed carrot seeds in -0.50 MPa PEG 8000 showed higher percent germination at $10^{\circ}C$ or $35^{\circ}C$. Reductions in T50 and MDG values were observed at all germination temperatures when primed with the PEG. The PEG combined with 100 mM $K_3PO_4$ was not as effective as the PEG alone in improving the germinability of carrot seeds. Nonprimed lettuce seeds germinated only 2% at $30^{\circ}C$ or $35^{\circ}C$. However, priming with 50 mM $K_3PO_4$ increased germination to 40% at $30^{\circ}C$ and to 21% at $35^{\circ}C$. In contrast to the single treatment of 50mM $K_3PO_4$, priming lettuce seeds in a mixture of 50mM $K_3PO_4$ and 200 mM $KH_2PO_4$ resulted in a lower percentage of germination, but a significant greater reduction of T50 and MDG. Percent germination was increased when 200 mM $KH_2PO_4$-primed onion seeds and 100 mM $Ca(NO_3)_2$-primed Welsh onion seeds were germinated at $10^{\circ}C$ or $35^{\circ}C$. Combined treatments with $Ca(NO_3)_2$ for onion and with $KH_2PO_4$ for Welsh onion seeds did not improve percent germination, but they significantly reduced T50 and MDG.

• Journal of Life Science
• /
• v.19 no.1
• /
• pp.15-20
• /
• 2009

Uncoupling protein 3 (UCP3) is a mitochondrial protein that is expressed predominantly in skeletal muscle. It may play a role in altering metabolic function. However, its major physiological roles are not fully understood. Recently de novo expression of UCP3 in rat liver by fenofibrate was reported. We also reported previously that fenofibrate-induced de novo expression of UCP3 contributes to reduction of adipose tissue in obese rats. In the present study, we investigated that ienofibrate-induced expression of UCP3 in rat liver is related with metabolic function such as body weight and hepatic lipid content by time-dependent manner in high-fat diet rats. Eight-week-old male Sprague-Dawley rats were randomly divided into two groups; the high fat diet group (HF, n=16) and fenofibrate-treated high fat diet group (HFF, n=16). The mRNA expression of hepatic UCP3 was detected as early as 1 week of fenofibrate treatment by quantitative real-time PCR and the amount of mRNA was increased time-dependently. The mean body weight of the HFF group was significantly less com. pared with the HF group after 6 weeks of fenofibrate treatment, even though there was no difference of food intake between the two groups. Rectal temperature was increased during 4 to 6 weeks of fenofibrate treatment and body weight was decreased after 6 weeks of treatment. These results were corresponded with the increased amount of the expression of UCP3 mRNA and protein. We suggest that de novo expression of hepatic UCP3 is increased time-dependently with fenofibrate treatment and that the amount of expression is correlated with metabolic function.

• Korean Journal of Food Science and Technology
• /
• v.27 no.2
• /
• pp.156-163
• /
• 1995

The practical shelf-life of pasteurized Korean rice wine ‘Yakju’, aseptically packed in Tetra-pak, was determined. The test sample products were stored at $4^{\circ}C,\;20^{\circ}C,\;30^{\circ}C\;and\;35^{\circ}C$ for 19 weeks, and the quality assessment was made at two weeks interval. The quality parameters evaluated were pH, acidity, reducing sugar, absorbance at 370 nm, total and acid producing bacteria, yeast and mold, and sensory quality. No meaningful changes of pH and reducing sugar were noticed during the storage for 19 weeks at temperatures tested. The absorbance at 370 nm increased slightly during storage. The total numbers of microorganisms in the product decreased during storage and a drastical reduction of acid producing bacteria was observed after 6 weeks of storage. Both yeast and mold were not found in the pasteurized products. The sensory quality of stored rice-wine was evaluated by triangle test and scoring test. The panels could distinguish the product stored at $4^{\circ}C$ from other products stored at the higher temperatures for over 6 weeks. The overall acceptance of the product decreased gradually during storage, and the rate constants for the changes were $7.93{\times}10^{-3},\;at\;20^{\circ}C,\;9.69{\times}10^{-3}\;at\;30^{\circ}C\;and\;13.4{\times}10^{-3}\;at\;35^{\circ}C$, respectively. The activation energy estimated by Arrhenius equation was 24,795 kJ/kmol. The estimated shelf-life of Yakju pasteurized and aseptically packed was 24 months at $10^{\circ}C$, 16 months at $25^{\circ}C$ and 14 months at $25^{\circ}C$. The shelf-life of Yakju in Seoul was calculated to be 20 months, based on the monthly average temperature of the city.

• Proceedings of the Microbiological Society of Korea Conference
• /
• 2008.05a
• /
• pp.39-41
• /
• 2008

The yeast Saccharomyces cerevisiae has been shown to contain three isoforms of citrate synthase (CS). The mitochondrial CS, Cit1, catalyzes the first reaction of the TCA cycle, i.e., condensation of acetyl-CoA and oxaloacetate to form citrate [1]. The peroxisomal CS, Cit2, participates in the glyoxylate cycle [2]. The third CS is a minor mitochondrial isofunctional enzyme, Cit3, and related to glycerol metabolism. However, the level of its intracellular activity is low and insufficient for metabolic needs of cells [3]. It has been reported that ${\Delta}cit1$ strain is not able to grow with acetate as a sole carbon source on either rich or minimal medium and that it shows a lag in attaining parental growth rates on nonfermentable carbon sources [2, 4, 5]. Cells of ${\Delta}cit2$, on the other hand, have similar growth phenotype as wild-type on various carbon sources. Thus, the biochemical basis of carbon metabolism in the yeast cells with deletion of CIT1 or CIT2 gene has not been clearly addressed yet. In the present study, we focused our efforts on understanding the function of Cit2 in utilizing $C_2$ carbon sources and then found that ${\Delta}cit1$ cells can grow on minimal medium containing $C_2$ carbon sources, such as acetate. We also analyzed that the characteristics of mutant strains defective in each of the genes encoding the enzymes involved in TCA and glyoxylate cycles and membrane carriers for metabolite transport. Our results suggest that citrate produced by peroxisomal CS can be utilized via glyoxylate cycle, and moreover that the glyoxylate cycle by itself functions as a fully competent metabolic pathway for acetate utilization in S. cerevisiae. We also studied the relationship between Cit1 and apoptosis in S. cerevisiae [6]. In multicellular organisms, apoptosis is a highly regulated process of cell death that allows a cell to self-degrade in order for the body to eliminate potentially threatening or undesired cells, and thus is a crucial event for common defense mechanisms and in development [7]. The process of cellular suicide is also present in unicellular organisms such as yeast Saccharomyces cerevisiae [8]. When unicellular organisms are exposed to harsh conditions, apoptosis may serve as a defense mechanism for the preservation of cell populations through the sacrifice of some members of a population to promote the survival of others [9]. Apoptosis in S. cerevisiae shows some typical features of mammalian apoptosis such as flipping of phosphatidylserine, membrane blebbing, chromatin condensation and margination, and DNA cleavage [10]. Yeast cells with ${\Delta}cit1$ deletion showed a temperature-sensitive growth phenotype, and displayed a rapid loss in viability associated with typical apoptotic hallmarks, i.e., ROS accumulation, nuclear fragmentation, DNA breakage, and phosphatidylserine translocation, when exposed to heat stress. Upon long-term cultivation, ${\Delta}cit1$ cells showed increased potentials for both aging-induced apoptosis and adaptive regrowth. Activation of the metacaspase Yca1 was detected during heat- or aging-induced apoptosis in ${\Delta}cit1$ cells, and accordingly, deletion of YCA1 suppressed the apoptotic phenotype caused by ${\Delta}cit1$ mutation. Cells with ${\Delta}cit1$ deletion showed higher tendency toward glutathione (GSH) depletion and subsequent ROS accumulation than the wild-type, which was rescued by exogenous GSH, glutamate, or glutathione disulfide (GSSG). Beside Cit1, other enzymes of TCA cycle and glutamate dehydrogenases (GDHs) were found to be involved in stress-induced apoptosis. Deletion of the genes encoding the TCA cycle enzymes and one of the three GDHs, Gdh3, caused increased sensitivity to heat stress. These results lead us to conclude that GSH deficiency in ${\Delta}cit1$ cells is caused by an insufficient supply of glutamate necessary for biosynthesis of GSH rather than the depletion of reducing power required for reduction of GSSG to GSH.