• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.142.1-142.1
• /
• 2016

We present bulk diffusion rates of hydroxide ions in amorphous solid water (ASW) at 135 ~ 160 K. Previous researches showed that the diffusion mechanism of hydroxide is different from one of hydronium ions, and this implies that they have different diffusion rates. In ultra-high vacuum (UHV) chamber, low-energy scattering (LES) was used to measure ion population and temperature-programmed desorption (TPD) was conducted for measuring ASW thicknesses. To determine the diffusion rates, a simple model for $H_2O/NaOH/H_2O$ sandwich films was developed using Fick's second law. The measured surface population of hydroxide ions as a function of time was well fitted to the model, and the rates were well agreed to an Arrhenius equation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.76-76
• /
• 2010

The interaction of hydrogen (H) and ZnO surfaces has been investigated using a temperature programmed desorption (TPD) technique. When the surface is exposed to atomic hydrogen below 400 K, hydrogen is adsorbed on the surface. As the hydrogen exposure increases, bulk diffusion of hydrogen takes place. The existence of surface and bulk hydrogen has been confirmed using X-ray photoelectron spectroscopy (XPS). When the ZnO(000-1) surface dosed with hydrogen is heated, surface hydrogen is desorbed at 432 K and bulk hydrogen is evolved at ~539 K. Diffusion of hydrogen into the ZnO bulk is an activated process, and the activation energy is estimated to be 0.19 eV. Diffusion of hydrogen on the ZnO(10-10) surface is also investigated.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.332-332
• /
• 2011

The adsorption and desoprtion properties on Pt(111) of chiral molecules, propylene oxide (PO) and 1,3-dimethyl butylamine (DMBA), have be characterized in utrahigh vacuum. Precision-doses of PO and DMBA onto a Pt(111) surface at 90 K have been achieved with a directed tubular molecular doser controlled by a micron-sized orifice and the reservoir gas pressure. Temperature-programmed desorption (TPD) mass spectra have been employed together with low-energy electron diffraction (LEED) analyses. In addition to the separate adsorption behaviors of PO and DMBA, the enantioselective adsorption of R- and S-PO on Pt(111) precovered with R- or S-DMBA have been investigated thoroughly, and the results will be presented.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.6
• /
• pp.1856-1860
• /
• 2012

$SnO_2/SiO_2$ nanocomposite has been synthesized by using sol-gel method. Prepared catalytic materials has been well characterized by using X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), Fourier transform infrared spectroscopy (FT-IR), Brunauer-Emmer-Teller (BET) surface area, and temperature-programmed desorption of ammonia ($NH_3$-TPD). $SnO_2/SiO_2$ nanocomposite catalyzed synthesis of 2-arylbenzothiazoles by the cyclocondensation of 2-aminothiophenol and aromatic aldehydes under reflux condition in 1:1 EtOH:$H_2O$. After completion of the reaction, catalyst can be recovered efficiently and reused with consistent activity.

• Journal of Hydrogen and New Energy
• /
• v.18 no.2
• /
• pp.116-123
• /
• 2007

[ $La_{0.5}Ce_{0.5}Co_{1-x}Cu_xO_{3-{\alpha}}$ ](X=0, 0.1, 0.3, 0.5) perovskites were prepared by coprecipitation method at pH 7 or pH 11 and its catalytic activity of selective CO oxidation was investigated. The characteristics of these catalysts were analyzed by $N_2$ adsorption, X-ray diffraction(XRD), SEM, $O_2$-temperature programmed desorption(TPD). The pH value at a preparation step made effect on particle morphology. The smaller particle was obtained with a condition of pH 7. The better catalytic activity was observed using catalysts prepared at pH 7 than pH 11. The maximum CO conversion of 98% was observed over $La_{0.5}Ce_{0.5}Co_{0.7}Cu_{0.3}O_{3-{\alpha}}$ at $320^{\circ}C$. Below $200^{\circ}C$, the most active catalyst was $La_{0.5}Ce_{0.5}Co_{0.9}Cu_{0.1}O_{3-{\alpha}}$, of which conversion was 92% at $200^{\circ}C$. By the substitution of Cu, the evolution of ${\alpha}$-oxygen was remarkably enhanced regardless of pH value at preparation step according to $O_2$-TPD. Among the different ${\alpha}$-oxygen species, the oxygen species evolved between $400^{\circ}C$ and $500^{\circ}C$, gave the better catalytic performance for selective CO oxidation including $La_{0.5}Ce_{0.5}CoO_3$ in which Cu was absent.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.642-645
• /
• 2007

석탄, 폐기물 등 다양한 시료의 가스화 반응을 통해서 발생되는 합성가스는 CO, $H_2$, $CO_2$가 주성분으로 가스엔진, 가스터빈 등의 연료로 사용하여 발전하거나 합성반응을 통해 다양한 화학원료로의 전환이 가능하다. 합성가스를 가스엔진, 가스터빈, 연료전지등의 연료로 사용하는 경우는 고효율 발전이 가능하여 기존 연소방식의 발전과 비교하여 단위 전력 생산량 당 $CO_2$의 배출량이 감소 되며, 여기에 $CO_2$ 분리공정을 적용하면 $CO_2$ 배출량 감소효과를 극대화 할 수 있다. 화석연료의 연소 및 가스화 반응을 통해서 발생하는 이산화탄소의 분리에 대한 많은 연구가 진행되고 있으나, 본 연구에서는 흡착방식을 이용한 합성가스 내의 이산화탄소 분리를 위하여 흡착제를 이용한 이산화탄소의 흡착, 탈착 성능 분석 연구를 수행하였다. 합성가스내의 이산화탄소를 분리하기 위한 흡착제로는 NaX 계열의 zeolite를 이용하였으며, 가스화 반응을 통해 발생한 합성가스를 흡착제에 통과시켜 이산화탄소의 선택적 흡착 여부를 확인하였다. 또한 TPD(Temperature Programmed Desorption)방법을 이용하여 흡착제의 이산화탄소 흡착 성능을 분석하였다.

• Applied Chemistry for Engineering
• /
• v.18 no.4
• /
• pp.337-343
• /
• 2007

The reforming catalyst and the electrodes in fuel cells can be poisoned by the organic sulfur compound which is added as an odorant for checking out the leakage of natural gas, and that makes a big problem of system degradation. In this study, various adsorbents, such as silica, ${\gamma}$-alumina, activated carbon, HZSM-5, Ultra-stable Y zeolite (USY), and beta zeolite (BEA), were utilized to remove tetra-hydrothiophene (THT) and tert-butylmercaptan (TBM), and to confirm the performance in the adsorption of those odorants by using a continuous adsorptive bed. The effects of Si/Al ratio of zeolites, adsorption temperature and the type of balance gas (methane or He) on the adsorption performance in the packed bed have been investigated. In addition, the competitive adsorption between TBM and THT on the adsorbents was also estimated. The result shows that H-type BEA zeolite exhibited the highest adsorption capacity for TBM and THT odorant, and the higher amount of THT was removed adsorptively on the same adsorbent than TBM. The physical and chemical adsorption of those compounds on acid sites of zeolite were confirmed by temperature programmed desorption (TPD) and infrared spectrum (IR) analyses.

• Applied Chemistry for Engineering
• /
• v.31 no.5
• /
• pp.560-567
• /
• 2020

In this study, we investigated that the effect of alkali metals [Na(Sodium) and K(Potassium)], known as representative deactivating substances among exhaust gases of various industrial processes, on the NH₃-SCR (selective catalytic reduction) reaction of V/W/TiO₂ catalysts. NO, NH₃-TPD (temperature programmed desorption), DRIFT (diffuse reflectance infrared fourier transform spectroscopy analysis), and H₂-TPR analysis were performed to determine the cause of the decrease in activity. As a result, each alkali metal acts as a catalyst poisoning, reducing the amount of NH₃ adsorption, and Na and K reduce the SCR reaction by reducing the L and B acid points that contribute to the reaction activity of the catalyst. Through the H₂-TPR analysis, the alkali metal is considered to be the cause of the decrease in activity because the reduction temperature rises to a high temperature by affecting the reduction temperature of V-O-V (bridge oxygen bond) and V=O (terminal bond).

• Applied Chemistry for Engineering
• /
• v.23 no.6
• /
• pp.624-629
• /
• 2012

To capture and recover carbon dioxide ($CO_2$), we impregnated honeycomb made of ceramic paper with $K_2CO_3$ and its absorption characteristics of $CO_2$ were investigated. The absorption amount of $CO_2$ on the honeycomb absorbent impregnated with $K_2CO_3$ was 13.8 wt% at a constant temperature ($70^{\circ}C$) and relative humidity (66%) condition. Because the absorption amount of $CO_2$ achieved almost the same loading ratio of $K_2CO_3$ (17.6 wt%), the absorption reaction of $CO_2$ by $K_2CO_3$ on the honeycomb absorbent seems to be going smoothly. In addition, $CO_2$ absorption breakthrough characteristics of the honeycomb absorbent were analyzed at the temperature range of $50{\sim}80^{\circ}C$, and the water vapor was fed to an absorption column before the feeding of $CO_2$ or simultaneously with $CO_2$. As a result, the absorption capacity of $CO_2$ was more enhanced using the water vapor supplying before $CO_2$ than that of simultaneous supplying. It was confirmed by temperature programmed desorption analysis that the $KHCO_3$ produced by the absorption reaction of $K_2CO_3$ and $CO_2$ is regenerated by the desorption of $CO_2$ at a temperature of about $128^{\circ}C$.

• Journal of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.135-142
• /
• 1989

Methyl tert-butyl ether(MTBE) was synthesized from vapor phase reaction of methanol with iso-butylene over HZSM-5 catalysts, and effects of SiO$_2/Al_2O_3$ ratio in the HZSM-5 catalysts and reaction conditions on products distribution have been examined. Acid strength and acid type of each catalyst with different SiO$_2/Al_2O_3$ ratio were measured using pyridine adsorption followed by temperature programmed desorption(TPD) and IR analysis. Reactants and products adsorption characteristics on different acid sites have also been examined. As the SiO$_2/Al_2O_3$ ratio of HZSM-5 catalyst was increased, selectivity to MTBE was improved as a result of decrease in dimethylether(DME) formation at the strong acid sites. Conversion and selectivity to MTBE were also greatly enhanced as $i-C_4H_8/CH_3OH$ reactant ratio was increased, and overall about 80$^{\circ}$C was adequate for the MTBE synthesis. The properties of deposited coke on spent catalysts were examined by TG, DTA and IR spectrum analysis, indicating the amount of the coke deposit in the order of HY > H-Mordenite > HZSM-5. Even if the coke deposited on H-Mordenite was little more in amount than to that on HZSM-5, the former deactivated quickly due to its non-interconnected channel structure. For HY, owing to its lange pore size, significant $i-C_4H_8$ polymerization was occured, and rapid deactivation and severe coke formation has resulted within few hours.