• Korean Journal of Environmental Biology
• /
• v.36 no.4
• /
• pp.672-679
• /
• 2018

This study was conducted to predict the potential distribution and risk of invasive alien plant, Amaranthus patulus, in an agricultural area of South Korea. We collected 254 presence localities of A. patulus using field survey and literature search and stimulated the potential distribution area of A. patulus using maximum entropy modeling (MaxEnt) with six climatic variables. Two different kinds of agricultural risk index, raster risk index and regional risk index, were estimated. The 'raster risk index' was calculated by multiplying the potential distribution by the field area in $1{\times}1km$ and 'regional risk index' was calculated by multiplying the potential distribution by field area proportion in the total field of South Korea. The predicted potential distribution of A. patulus was almost matched with actual presence data. The annual mean temperature had the highest contribution for distribution modeling of A. patulus. Area under curve (AUC) value of the model was 0.711. The highest regions were Gwangju for potential distribution, Jeju for 'raster risk index' and Gyeongbuk for 'regional risk index'. This different ranks among the index showed the importance about the development of various risk index for evaluating invasive plant risk.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.3
• /
• pp.187-195
• /
• 2019

The needs for precise diagnostics and farm management-decision aids have increased to reduce the risk of climate change and environmental stress. Crop simulation models have been widely used to search optimal solutions for effective cultural practices. However, limited knowledge on physiological responses to environmental variation would make it challenging to apply crop simulation models to a wide range of studies. Advanced research facilities would help investigation of plant response to the environment. In the present study, the sunlit controlled environment chambers, known as Korean SPAR (Soil-Plant-Atmosphere-Research) system, was developed by renovating existing SPAR system. The Korean SPAR system controls and monitors major environmental variables including atmospheric carbon dioxide concentration, temperature and soil moisture. Furthermore, plants are allowed to grow under natural sunlight. Key physiological and physical data such as canopy photosynthesis and respiration, canopy water and nutrient use over the whole growth period are also collected automatically. As a case study, it was shown that the Korean SPAR system would be useful for collection of data needed for understanding the growth and developmental processes of a crop, e.g., soybean. In addition, we have demonstrated that the canopy photosynthetic data of the Korean SPAR indicate the precise representation of physiological responses to environment variation. As a result, physical and physiological data obtained from the Korean SPAR are expected to be useful for development of an advanced crop simulation model minimizing errors and confounding factors that usually occur in field experiments.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.1
• /
• pp.203-209
• /
• 2019

In this work, a new land-specific resistance measuring device (GM) and a measuring probe (Grounding Rod) are connected to the WENNER quadrant as power-line communication (PLC). In groups of two (P1,P2) probes, five to ten probes are installed in series on the ground at intervals of 1m, 2m, 4m, 8m, and 16m, respectively. If the PLC signal from the GMD is detected by the receiver of the Probe 1 (P1) for measurement, the minute voltage and current for measurement flow from the PSD (power supply) attached to the probe to the ground, and then, through the soil between P1 and P2, enters the Probe 1 (P2). The resistance value is then measured by the principle of voltage drop due to ground resistance. Measure the earth resistance every T seconds up to 1 trillion and store the measured data on the Arduino Server mounted on the main equipment. Stored measurement data can be derived from formulas by Ohm's Law and from inherent resistance (here,). Data obtained in real time will be linked to CDGES programs installed on Main PC, enabling data analysis and real-time monitoring of the ground environment on land. In addition, a three-dimensional display is possible with 3D graph support by identifying seasonal characteristics such as temperature and humidity of land (soils). The limitations of the study will require specific application measures of Test Bed for commercial access to a model that has been developed and operated experimentally.

• Smart Structures and Systems
• /
• v.24 no.6
• /
• pp.769-781
• /
• 2019

Dynamic displacement response of civil structures is an important index for in-construction and in-service structural condition assessment. However, accurately measuring the displacement of large-scale civil structures such as high-rise buildings still remains as a challenging task. In order to cope with this problem, a vision-based system with the use of industrial digital camera and image processing has been developed for long-distance, remote, and real-time monitoring of dynamic displacement of supertall structures. Instead of acquiring image signals, the proposed system traces only the coordinates of the target points, therefore enabling real-time monitoring and display of displacement responses in a relatively high sampling rate. This study addresses the in-situ experimental verification of the developed vision-based system on the Canton Tower of 600 m high. To facilitate the verification, a GPS system is used to calibrate/verify the structural displacement responses measured by the vision-based system. Meanwhile, an accelerometer deployed in the vicinity of the target point also provides frequency-domain information for comparison. Special attention has been given on understanding the influence of the surrounding light on the monitoring results. For this purpose, the experimental tests are conducted in daytime and nighttime through placing the vision-based system outside the tower (in a brilliant environment) and inside the tower (in a dark environment), respectively. The results indicate that the displacement response time histories monitored by the vision-based system not only match well with those acquired by the GPS receiver, but also have higher fidelity and are less noise-corrupted. In addition, the low-order modal frequencies of the building identified with use of the data obtained from the vision-based system are all in good agreement with those obtained from the accelerometer, the GPS receiver and an elaborate finite element model. Especially, the vision-based system placed at the bottom of the enclosed elevator shaft offers better monitoring data compared with the system placed outside the tower. Based on a wavelet filtering technique, the displacement response time histories obtained by the vision-based system are easily decomposed into two parts: a quasi-static ingredient primarily resulting from temperature variation and a dynamic component mainly caused by fluctuating wind load.

• Journal of Korea Foundry Society
• /
• v.41 no.3
• /
• pp.235-240
• /
• 2021

We present the effect of the critical cooling rate during rapid solidification on the nucleation of precipitates in an Fe₇₅B₁₃P₅Nb₂Hf₁C₄ (at.%) alloy. The thermophysical properties of the rapidly solidified Fe₇₅B₁₃P₅Nb₂Hf₁C₄ liquids, which were obtained at various cooling rates with various sizes of gas-atomized powder during a high-pressure inert gas-atomization process, were evaluated. The cooling rate of the small-particle powder (≤20 ㎛) was 8.4×10⁵ K/s, which was 13.5 times faster than that of the large-particle powder (20 to 45 mm; 6.2×10⁴ K/s) under an atomized temperature. A thermodynamic calculation model used to predict the nucleation of the precipitates was confirmed by the microstructural observation of MC-type carbide in the Fe₇₅B₁₃P₅Nb₂Hf₁C₄ alloy. The primary carbide phase was only formed in the large-particle gas-atomized powder obtained during solidification at a slow cooling rate compared to that of the small-particle powder.

• Journal of Korean Society of Forest Science
• /
• v.100 no.2
• /
• pp.240-245
• /
• 2011

Vegetation changes were studied for 16 yr in clearcut logged Pinus densiflora forests in the southern Gangwon-do province in Korea by applying chronosequence approach. Ambient temperature and relative humidity, Detrended Correspondence Analysis (DCA), Multiple Responses Permutation Procedure (MRPP), Indicator Species Analysis (ISPAN) were used to examine successional trajectory and compositional changes. After clearcutting, canopy openness was increased abruptly at three folds (1yr 68.3% and R1 23.0%) and then decreased, but relative moisture was slightly decreased (6%) compare to control site. In the result of DCA, right after clear cutting, vegetation composition was developed heterogeneously compared to control sites, and then approached to control sites within 16 years. Based on MRPP, species composition of each developmental stages (1yr, 3yr, 10yr and 16yr) revealed signigicant differences to that of control vegetation (R1, R3, R10 and R16). Indicator species in 1yr and 3yr samples included various woody species rather than herbaceous species, but in 10yr and 16yr, herbaceous were more abundant. Earlier succession of pine forests likely can explain to Initial Floristic Composition (IFC) Model.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.192-199
• /
• 2020

The blower erosion phenomenon was investigated to develop a long-life blower with a volume flow rate of 10,000 ㎥/min with the required total pressure efficiency of 83% or more. The blower performance and blower erosion were predicted through numerical analysis by computational fluid dynamics(CFD). The conditions used for numerical analysis were an air volume of 16,200 ㎥/min, a rotation speed of 893 rpm, and a temperature of 330℃. The specific gravity, particle size, and amount of the dust was 3.15, 90 ㎛~212 ㎛, and is 265 kg/min, respectively. To examine the effects of a dust deflector on erosion, erosion analysis was performed by comparing the models with and without a dust deflector. Numerical analysis showed that when the dust deflector is installed, the average tended to decrease by 167% in the impeller and 133% in the boss. CFD using the Finne's model for erosion revealed a parallel restitution coefficient of 1 and a perpendicular restitution coefficient of 0.1. The blower performance of case 5 was 691.7 mmAq, and the efficiency was 83.3% when the rotation speed and the air volume flow rate were 880 rpm and 16,200 ㎥/min, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.36-42
• /
• 2021

With recent developments in the Fourth Industrial Revolution, the manufacturing industry has changed rapidly. Through key aspects of Fourth Industrial Revolution super-connections and super-intelligence, machine learning will be able to make fault predictions during the foam-making process. Polyol and isocyanate are components in polyurethane foam. There has been a lot of research that could affect the characteristics of the products, depending on the specific mixture ratio and temperature. Based on these characteristics, this study collects data from each factor during the foam-making process and applies them to machine learning in order to predict faults. The algorithms used in machine learning are the decision tree, kNN, and an ensemble algorithm, and these algorithms learn from 5,147 cases. Based on 1,000 pieces of data for validation, the learning results show up to 98.5% accuracy using the ensemble algorithm. Therefore, the results confirm the faults of currently produced parts by collecting real-time data from each factor during the foam-making process. Furthermore, control of each of the factors may improve the fault rate.

• Research in Plant Disease
• /
• v.28 no.3
• /
• pp.143-151
• /
• 2022

In order to investigate the cause of wilting symptoms in red pepper field of Korea, the frequency of occurrence of red peppers showing wilting symptoms was investigated in pepper cultivation fields in Goesan, Chungcheongbuk-do for 5 years from 2010 to 2014. There was a difference in the frequency of wilting symptoms depending on the year of investigation, but the frequency of occurrence increased as the investigation period passed from June and July to August. During this period, Ralstonia solanacearum causing the bacterial wilt was isolated at a rate four times higher than Phytophthora capsica causing the Phytophthora late blight. In wilted peppers collected in Goesan of Chungbuk and Andong of Gyeongbuk in 2013 and 2014, R. solanacearum and P. capsici were isolated from 20.3% and 3.8% of the total fields, respectively. In the year with a high rate of wilting symptoms, the average temperature was high, and the disease occurrence date of the bacterial wilt, estimated with disease forecasting model, was also fast. The inconsistency between the number of days at risk of Phytophthora late blight and the frequency of occurrence of wither symptoms is thought to be due to the generalization of the use of cultivars resistant to the Phytophthora late blight in the pepper field. In our study, the wilting symptoms were caused by the bacterial wilt caused by R. solanacearum rather than the Phytophthora late blight caused by P. capsica, which is possibly caused by increasing cultivation of pepper varieties resistant to the Phytophthora late blight in the field.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.54 no.6
• /
• pp.869-879
• /
• 2021

Methods for the development of home meal replacement seafood tailored to consumer needs for the advanced use of Broughton's ribbed ark Scapharca broughtonii (BRA) in Korea are required. In this study, we developed a cheese-topped, semi-dried, and seasoned Broughton's ribbed ark (S-BRA) tailored for the younger generation with an improved texture and fish odor. The optimization of conditions to improve the texture and fish odor was performed using RSM. The design of the model was appropriate because there was no significant difference (P>0.05) between the predicted and actual values of moisture content, hardness, and overall acceptance, and the optimal preparation conditions were a vinegar content of 2.68%, a soaking time of 62 min, a drying temperature of 60℃, and a time of 162 min. The S-BRA manufactured under these optimal conditions exhibited a lower odor intensity compared to the unsoaked and undried control, suggesting that the fish odor of S-BRA has been improved. The moisture content related to the texture of the S-BRA was lower than that of the control, and the hardness was higher. Therefore, the S-BRA developed in this study will appeal to people of all ages, especially the younger generation; their consumption is expected to increase.