• 한국식품조리과학회지
• /
• 제13권5호
• /
• pp.578-584
• /
• 1997

저염 동치미 쥬스의 제조를 위하여 동치미의 발효 온도와 담금액의 소금농도가 동치미 쥬스의 물리화학적 특성 및 관능적 특성에 미치는 영향을 비교하여 최적 발효온도와 소금농도를 선정하고자 하였다. 동치미 담금은 무를 담금액(0.3~3.0% NaCl)과의 비율이 1:1(w/v)되게 용기에 담그고 파, 마늘, 생강을 첨가한 다음 10, 20, 3$0^{\circ}C$에서 발효하였다. 동치미의 발효속도는 온도가 높을수록 빠르게 진행되었고 소금농도의 영향은 발효온도에 따라 달랐다. 10. 2$0^{\circ}C$에서는 3.0%의 소금농도로 담근 동치미가 가장 빨리 pH 3.8에 도달하였으며 0.5%가 그 다음이었다. 그러나 3$0^{\circ}C$에서는 소금농도가 높을수록 발효속도가 느렸다. pH 3.9의 동치미 쥬스를 채점법으로 관능검사 한 결과 새콤한 내와 맛은 0.5%의 소금농도로 2$0^{\circ}C$에서 발효시킨 동치미 쥬스가 가장 높게 평가받았고 기호도 검사에서도 2$0^{\circ}C$에서 0.5% NaCl 담금액에 발효시킨 pH 3.8~4.0의 동치미 쥬스가 가장 좋은 결과를 보여주었다. 한편 2$0^{\circ}C$에서의 0.5% NaCl 보다 낮은 담금액에서는 발효가 빠르게 진행되었고 높은 탁도를 보여주었지만 0.5%의 소금농도로 담근 동치미 쥬스의 향미가 가장 적합한 것으로 나타났다.

• 센서학회지
• /
• 제9권1호
• /
• pp.1-8
• /
• 2000

최근, 자동차가 점점 고급화 되어감에 따라 자동차엔진과 같이 $200^{\circ}C$ 이상의 고온과 부식적인 환경 하에 사용되어 질 수 있는 고성능의 실리콘 가속도센서의 장착이 기대되고 있다. 그러나 실리콘은 본질적으로 온도의 영향이 큰 물질이고, p-n 접합으로 압저항이 형성되기 때문에 $150^{\circ}C$ 이상이 되면 누설전류가 급격하게 증가하여 센서의 성능을 떨어뜨린다. 본 연구에서는 SOI 구조를 이용한 가속도센서의 온도특성을 해석하고, 유한요소법(finite element method)을 이용하여 감도 온도계수(TCS) 및 오프셋전압 온도계수(TCO)의 열잔류응력과의 관련성을 검토하였다. 그 결과, TCS는 압저항의 불순물 농도를 최적화함으로써 줄일 수 있고, TCO는 압저항의 열잔류응력과 불균일한 공정에 관계가 있다는 것을 알았다. 그리고 센서의 중앙지지구조에 있어서 패키징 열잔류응력의 평균값은 약 $3.7{\times}10^4Nm^{-2}^{\circ}C^{-1}$ 정도로 주변지지구조보다 1/10정도 작게 나타났다.

• 한국식품저장유통학회지
• /
• 제14권3호
• /
• pp.239-246
• /
• 2007

사과의 유통에서 내 외부 품질특성 및 외부 오염원으로부터의 안전성 확보를 위한 연구의 일환으로 사과에 감마선 조사를 실시하여 각각 $4^{\circ}C$와 $25^{\circ}C$에 저장하면서 사과의 생리화학적 및 물리적 품질특성을 살펴보았다. 연구 결과 영양 성분 및 기능성 성분의 손실이나 품질저하는 보존 온도에 의하여 결정되었고 감마선 조사에 의한 영향은 거의 나타나지 않았다. 또한 중량변화와 기계적 물성 특성 또한 감마선 조사에 의하여 영향을 받지 않았다. 색도와 관능특성은 상온 보관시 감마선 조사 시험구에서 다소간의 품질 열화가 관찰되었으나 저온보존에서는 대조구와 차이를 나타내지 않았다. 따라서, 감마선 조사는 사과의 영양성분 및 기능성, 그리고 물리적 요인의 보존안정성에 영향을 주지 않으면서도 미생물학적 관점에서의 유통, 보존안정성을 확보할 수 있는 유효한 기술이 될 수 있을 것으로 사료되었다.

• Water Engineering Research
• /
• 제3권2호
• /
• pp.143-153
• /
• 2002

As the natural flows in rivers dramatically decrease during drought season in Korea, a deterioration of river water quality is accelerated. Thus, consideration of downstream water quality responding to changes in reservoir release is essential for an integrated watershed management with regards to water quantity and quality. In this study, water quality models based on artificial neural networks (ANNs) method were developed using historical downstream water quality (rm $\NH_3$-N) data obtained from a water treatment plant in Geum river and reservoir release data from Daechung dam. A nonlinear multiple regression model was developed and compared with the ANN models. In the models, the rm NH$_3$-N concentration for next time step is dependent on dam outflow, river water quality data such as pH, alkalinity, temperature, and rm $\NH_3$-N of previous time step. The model parameters were estimated using monthly data from Jan. 1993 to Dec. 1998, then another set of monthly data between Jan. 1999 and Dec. 2000 were used for verification. The predictive performance of the models was evaluated by comparing the statistical characteristics of predicted data with those of observed data. According to the results, the ANN models showed a better performance than the regression model in the applied cases.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2005년도 수소연료전지공동심포지움 2005논문집
• /
• pp.103-110
• /
• 2005

Fuel cell systems are consisted of various parts, for example fuel cell stack, fuel supplier, electrical converters, controllers and so on. Each components of system should have appropriate specification for their applications as well as simplicity. Because thermal load can be managed simply by using fans without any water cooling system, the air-cooled PEMFC is widely used in sub kW and around 1kW systems. The performance of an air-cooled system is highly dependent on ambient temperature and humidity. In this paper, the air-cooled PEMFC systems are developed and investigated to study the operating characteristics in the aspect of the thermal and water coupled management by the control of the axial fans and compressors. Various experiments were also conducted to get the cell voltage distribution, the relative humidity of the reactant gas and the thermal management by axial cooling fans, which cannot be observed in single cell experiment. After then, as practical applications, portable fuel cell system and a hybrid electric cart were successfully integrated and operated by using this air-cooled stack.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1152-1157
• /
• 2004

Temporal behavior of the laser induced incandescence (LII) signal is often used for soot particle sizing, which is possible because the cooling behavior of a laser heated particle is dependent on the particle size. In present study, LII signals of soot particles are modeled using two non-linear coupled differential equations deduced from the energy- and mass-balance of the process. The objective of this study is to see the effects of particle size, laser fluence on soot temperature characteristics and cooling behavior. Together with this, we focus on validating our simulation code by comparing with other previous results. Results of normalized LII signals obtained from various laser fluence conditions showed a good agreement with that of Dalzell and Sarofim's. It could be found that small particles cool faster at a constant laser fluence. And it also could be observed that vaporization is dominant process of heat loss during first 100ns after laser pulse, then heat conduction played most important role while thermal radiation had little influence all the time.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.947-951
• /
• 2002

During the hotwire cutting of EPS foam sheet, the dimensional accuracy and part quality of the cut par are highly dependent upon the thermal field in the EPS. The thermal field is determined by operating parameters such as heat input, cutting speed and cutting angle. The objective of this study is to investigate into the influence of cutting angle on the kerfwidth and part quality of the cut part in hotwire cutting of EPS foam using the experiments and the numerical analysis in the case of a single sloped cutting. In order to estimate an accurate temperature field, the transient thermal analysis using a moving coordinate system and the sloped heat flux model is carried out. From the results of the experiments and the analysis, it has been found that the effect of cutting angle on the kerfwidth and the melted area at the edge are 0.1 mm and 0.11 m$m^2$ respectively. The results of the experiments show that the surface roughness is not appreciably influenced by the cutting angle.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.14-14
• /
• 2011

AlInN has been studied extensively over the past few years due to its interesting material properties that are not present in other ternary nitrides. However, basic material study of AlInN has not been reported as much compared to device applications due to the difficulty in the growth. We have performed the material studies from various aspects. A secondary ion mass spectrometry (SIMS) has shown high oxygen content above $1{\times}10^{18}\;cm^{-3}$ with its insensitivity to the growth conditions. While the free carrier concentration observed by the capacitance-voltage (C-V) measurements was about $3{\times}10^{17}\;cm^{-3}$, the activation energy measured by temperature dependent C-V was only about 4 meV. Si doped AlInN (Si level ${\sim}2{\times}10^{18}\;cm^{-3}$) showed almost no carrier freeze-out at carrier density of $1{\times}10^{18}\;cm^{-3}$. More studies were carried out with a transmission electron microscopy, time-resolved photoluminescence and other analytical techniques to understand the results from SIMS and C-V studies. In this report, we will discuss the possible correlations between the abnormal characteristics in AlInN.

• 대한의용생체공학회:의공학회지
• /
• 제31권6호
• /
• pp.472-480
• /
• 2010

Mechanically deformed cartilage undergoes a temperature dependent phase transformation resulting in reshaping of cartilage. Laser-assisted cartilage reshaping (LCR) is recently introduced to recreate the underlying cartilage framework in structures such as ear, larynx, trachea, and nose. However, this procedure has not been fully supported by confirmed efficacy because of the lack of scientific research and its safety issues. The purpose of this study is to evaluate current laser sources to determine optimal laser wavelength for LCR using mathematical simulations and investigate optical, thermo-mechanical, and backscattering properties of cartilage after laser irradiation. The results showed that 1444 nm wavelength was effective for reshaping of cartilage with minimal thermal damage in the surrounded tissues by monte carlo simulations. Analysis of bend angle changes, thermo-mechanical characteristics, and backscattered properties may be useful to better identify the biophysical transformation responsible for stress relaxation in cartilage and develop an optical feedback control methodologies.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1994년도 춘계학술대회 and 제3회 신약개발 연구발표회
• /
• pp.129-130
• /
• 1994

The science of toxicology is the understanding of the mechanisms by which exogenous agents produce deleterious effects in biological systems. The actions of chemicals such as drugs are ultimately exerted at the cellular and gene levels. Over the past decade. several in vitro alternative methods such as cultured cells for assessing the toxicity of various xenobiotics have been proposed to reduce the use of animals. In this workshop three advanced methods will be presented. These methods are novel important models for toxicologic studies. Dr. Tabuchis group has establishcd two immortalized gastric surface mucosa cell lines from the pminary cultore of gastric fundic mucosal cells of adult transgenic mice harboring a temperature sensitive simian virus 40 large T-anugen gene. As the immortalized cell lines of various tissues possess unique characteristics to maintain their normal functions for several months, these cell lines are extremely useful for not only toxicity testing but also pharmacological screening in new drug development. Professor Funatsu have studied the formation of spherical multicelluar aggregates of adult rat hepatocytes(spheroid) having tissue like structure. The sphcroid shown thre is a prototype module of an artificial liver support system. Thus, the urea synthesis activity of the artificial liver was maintained at least to days in 100％ rat blood plasma. Dr. Takezawa and his coworkers have developed a novel culture system of multicellular spheroids considered 〃organoids〃 by utilizing a thermo-responsive polymer as a substratum of anchorage dependent cells. His final goal is to reconstitute the organoids of various normal organs, e.g., liver, skin etc. and also abnormal deseased organs such as tumor.