• Horticultural Science & Technology
• /
• v.32 no.3
• /
• pp.346-352
• /
• 2014

This research was carried out to investigate the effect of supplemental lighting on stable productivity of paprika (Capsicum annuum L.) during low radiation period of winter season. The supplemental lighting sources used in this research were high pressure sodium (HPS) and lighting emitting plasma (LEP). Photosynthetic photon flux density (PPFD) emitted from both lamps decreased as vertical distance from lamp increased. The PPFD of LEP lamps were twice more than that of the HPS lamp per unit distance, but the rate of decreased PPFD of t he LEP per unit distance was higher than that of HPS lamp. And different degrees of PPFD between HPS and LEP lamps by horizontal distance had a smaller degree of difference than by vertical distance at the 100 cm away point. As daily average PPFD measured at the top of the plant under the supplemental lighting during January, the supplemental lighting significantly increased radiation. Radiation of HPS and LEP lighting was 137% and 315% higher than control (without supplemental lighting = sunlight). Air temperature in the top of the plant was not significant different among treatments. HPS and LEP lighting had no effect on increase of flower settings. Leaf length and width with LEP lighting was the longest, photosynthetic was higher than those of other treatments. Supplemental lighting treatments significant increased fruit length and diameter. Especially LEP lighting treatment had a greater effect on fruit length and diameter. In conclusion, LEP lighting treatment during low radiation period greatly affected growth and production of paprika. Further research will be required for the suitable application of LEP lighting in paprika production.

• Korean Journal of Ecology and Environment
• /
• v.44 no.1
• /
• pp.75-84
• /
• 2011

We examined the effect of the turbid water on the periphytic diatom community in an artificial stream system. The artificial stream was constructed with transparent acryl and composed of four channels. Each channel ($20\;cm{\times}200\;cm{\times}40\;cm$) was supplied continuously with eutrophic lake water. In order to the freely colonize and grow diatoms, artificial substrate was installed with commercial slide glass soaked in 1% agar. Prior to introducing turbid water, the artificial stream was operated with lake water for 6 days to permit the propagation of diatom community on the substrates. The turbid water prepared with sediment sieved with ${\varphi}$ $64\;{\mu}m$ at $2\;g\;L^{-1}$ (final concentration, 300 NTU) was provided daily for 50 minute duration. The experiment was conducted for 7 days with manipulated experimental condition of light ($50{\sim}80\;{\mu}mol\;m^{-2}s^{-1}$, light:dark=24:0), temperature ($10{\pm}1^{\circ}C$), and flow rate ($0.31\;cm\;s^{-1}$). Sampling and analysis were conducted daily for water quality and diatom. Turbidity of the water varied 162.2~173.2 NTU during the experiment. After introduction of turbid water, DO, pH and TN were decreased, while SS and TP increased significantly. A total of 14 genera and 47 species of diatoms was observed on the artificial substrates during the experimental period. Of these, Navicula appeared to be a most dominant genus with 10 species, followed by Cymbella (6 species), Fragilaria (6 species) and Gomphonema (5 species). Achnanthes minutissima was the most dominant species (>70% of total frequency) in both control and treatment experiments. Increase in diatom abundance lasted for three days since turbid water introduction, after that they gradually decreased by the termination of the experiment. These results suggest that frequent supply of highly-concentrated turbid water significantly decreases the periphytic diatom community, and retard the recovery of the stable food-web within the stream.

• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.177-183
• /
• 2008

It was reported that esthetic composite resin restoration reinforces the strength of remaining tooth structure with preserving the natural tooth structure. However, it is unknown how much the strength would be recovered. The purpose of this study was to compare the fracture resistance of three types of undermined cavity filled with composite resin with that of non-cavitated natural tooth. Forty sound upper molars were allocated randomly into four groups of 10 teeth. After flattening occlusal enamel. undermined cavities were prepared in thirty teeth to make three types of specimens with various thickness of occlusal structure (Group $1{\sim}3$). All the cavity have the 5 mm width mesio-distally and 7 mm depth bucco-lingually. Another natural 10 teeth (Group 4) were used as a control group. Teeth in group 1 have remaining occlusal structure about 1 mm thickness, which was composed of mainly enamel and small amount of dentin. In Group 2, remained thickness was about 1.5 mm, including 0.5 mm thickness dentin. In Group 3, thickness was about 2.0 mm, including 1 mm thickness dentin. Every effort was made to keep the remaining dentin thickness about 0.5 mm from the pulp space in cavitated groups. All the thickness was evaluated with radiographic Length Analyzer program. After acid etching with 37% phosphoric acid, one-bottle adhesive (Single $Bond^{TM}$, 3M/ESPE, USA) was applied following the manufacturer's recommendation and cavities were incrementally filled with hybrid composite resin (Filtek $Z-250^{TM}$, 3M/ESPE, USA). Teeth were stored in distilled water for one day at room temperature, after then, they were finished and polished with Sof-Lex system. All specimens were embedded in acrylic resin and static load was applied to the specimens with a 3 mm diameter stainless steel rod in an Universal testing machine and cross-head speed was 1 mm/min. Maximum load in case of fracture was recorded for each specimen. The data were statistically analyzed using one-way analysis of variance (ANOVA) and a Tukey test at the 95% confidence level. The results were as follows: 1. Fracture resistance of the undermined cavity filled with composite resin was about 75% of the natural tooth. 2. No significant difference on fracture loads of composite resin restoration was found among the three types of cavitated groups. Within the limits of this study, it can be concluded the fracture resistance of the undermined cavity filled with composite resin was lower than that of natural teeth, however remaining tooth structure may be supported and saved by the reinforcement with adhesive restoration, even of that portion consists of mainly enamel and a little dentin structure.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.14 no.4
• /
• pp.201-211
• /
• 1981

For the effective utilization of sardine, sardinops melanosticta, one of the major coastal fish in Korea, of which annual catch has been increasing from year to year since 1970, it was processed in form of fermented fish paste. The fish were treated with BHA and Teaox-Ⅱ in concentration of $0.01\%\;and\;0.02\%$ to prevent the oxidation of lipid during fermentation and then salted with $20\%$ table salt and fermented at room temperature of $25\pm3^{\circ}C$. The duration of fermentation necessary for the final product with an acceptable taste was determined by sensory evaluation by means of profile method. From the result of sensory evaluation, one month was found to be suitable as the reasonable duration of fermentation. Both BHA and Tenox-Ⅱ in conceatration of $0.02\%$showed a good preventing effect on the lipid oxidation during fermentation. In case of fermented sardine treated with both antioxidants, lipid oxidation occurred little up to two months, whereas the control showed a remarkable deterioration during one month of fermentation. Most of the nucleotides in sardine was decomposed from adenosing triphosphate to inosine and hypoxanthine during the fermentation of one month. The great portion of free amino acids in the extractives of product was occupied by leucine, glutamic acid, isoleucine, alanine, valine and ysine in turn, and their coatent was $59.4\%$ of the total free amino acids. The amount of essential amino acids was $59.4\%$ of the total free amino acids. The contents of 5'-IMP, betaine, trimethylamine oxide and total creatinine in the extractives of product were $1.9{\mu}mole/g,\;4.9mg\%,\;1.0mg\%\;and\;475mg\%$, respectively. According to the omission test, the main constituents of the characteristic taste of fermented sardine could be assumed as free amino acids and a little amount of 5'-IMP.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.7
• /
• pp.492-507
• /
• 2010

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2009. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of general thermal and fluid flow, fluid machinery and piping, and new and renewable energy. Various topics were covered in the field of general thermal and fluid flow such as an expander, a capillary tube, the flow of micro-channel water blocks, the friction and anti-wear characteristics of nano oils with mixtures of refrigerant oils, etc. Research issues mainly focused on the design of micro-pumps and fans, the heat resistance reliability of axial smoke exhaust fans, and hood systems in the field of fluid machinery and piping. Studies on ground water sources were executed concerning two well type geothermal heat pumps and multi-heat pumps in the field of new and renewable energy. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included the heat transfer in thermoelectric cooling systems, refrigerants, evaporators, dryers, desiccant rotors. In the area of industrial heat exchangers, researches on high temperature ceramic heat exchangers, plate heat exchangers, frosting on fins of heat exchangers were performed. (3) In the field of refrigeration, papers were presented on alternative refrigerants, system improvements, and the utilization of various energy sources. Refrigeration systems with alternative refrigerants such as hydrocarbons, mixed refrigerants, and $CO_2$ were studied. Efforts to improve the performance of refrigeration systems were made applying various ideas of suction line heat exchangers, subcooling bypass lines and gas injection systems. Studies on heat pump systems using unutilized energy sources such as river water, underground water, and waste heat were also reported. (4) Research trend in the field of mechanical building facilities has been found to be mainly focused on field applications rather than performance improvements. In the area of cogeneration systems, papers on energy and economic analysis, LCC analysis and cost estimating were reported. Studies on ventilation and heat recovery systems introduced the effect on fire and smoke control, and energy reduction. Papers on district cooling and heating systems dealt with design capacity evaluation, application plan and field application. Also, the maintenance and management of building service equipments were presented for HVAC systems. (5) In the field of architectural environment, various studies were carried to improve indoor air quality and to analyze the heat load characteristics of buildings by energy simulation. These studies helped to understand the physics related to building load characteristics and to improve the quality of architectural environment where human beings reside in.

• Journal of Veterinary Clinics
• /
• v.26 no.6
• /
• pp.568-573
• /
• 2009

The purpose of this study is to evaluate the analgesic effects on the oral cavity in dogs which are treated with xylazine and electroacupuncture (EA). Furthermore, this study aims to find out its effects on glucose (GLU), serum alanine aminotransferase (ALT), and blood urea nitrogen (BUN) variation values, vital signs (rectal temperature, heart rate, respiratory rate) and pain responses to the noxious stimuli. Eight healthy dogs were randomly assigned to receive either xylazine or EA. Xylazine group dogs with weight of 3.6${\pm}$1.0 kg received 1.5 mg/kg of xylazine intramuscularly. EA group dogs with weight of 3.9${\pm}$1.0 kg received 1 volt (10-15 hz) for 5 minutes, and then 1-9 Volts (25-30 hz) for 60 minutes totally. The acupoints used were LI-3 (San Jian), LI-4 (He Gu) and ST-7 (Xia Guan). All dogs were examined before and 10, 25, 40, 55 and 120 minutes after administration of xylazine or EA. The mean rectal temperatures of the EA group were significantly higher than those of xylazine group after 25, 40 and 55 minutes (p < 0.05). The mean heart rates of the EA group were significantly higher than those of xylazine group after 10, 25, 40 and 55 minutes (p < 0.05). The mean respiratory rates of the EA group were significantly higher than those of xylazine group after 55 and 120 minutes (p < 0.05). The mean GLU concentration of the EA group were significantly lower than those of xylazine group after 55 and 120 minutes (p < 0.05). The sum of mean pain scores (SMPS) of the EA group were significantly higher than those of xylazine group after 10, 25 40 and 55 minutes (p < 0.05). In this study, the pain control of the EA group was shown to be better than that of the xylazine group. Also, there do not appear to be any negative physiologic effects associated with acupuncture-induced surgical analgesia. So, it was considered that these acupoints of EA analgesia might be useful for minor oral surgery in weak patients.

• The Korean Journal of Food And Nutrition
• /
• v.14 no.1
• /
• pp.34-39
• /
• 2001

The purpose of this study was to examine physical properties of the addition of green tea powder on bread flour and dough rheology of white pan bread. Three levels(0.1, 0.5 and 1.0% ) of each green tea powder with bread flour were tested for their effects in dough mixing using rapid disco analyzer, alveogram and farinogram. Addition of green tea powder tended to reduce initial pasting temperature and increase peak viscosity, break down and set back. L(extensibility) and G(swelling index) value in alveogram showed decrement with increasing green tea powder. These meant that the volume of white pan bread would show same tendency. The use of green tea powder increased consistency and water absorption of the bread flour but decreased development time, salability and degree of softening on farinogram. White pan bread with green tea powder had higher value of hardness and springness than without it. Sensory evaluation determined that the white pan bread with 0.5% green tea powder had the highest score.

• Journal of Wetlands Research
• /
• v.4 no.1
• /
• pp.63-85
• /
• 2002

This study was carried out to provide basic data for water environmental control and conservation, and to elucidate monthly water environmental factor, phytoplankton flora and dominant species that each stations was maked a selection of a sites by represent 3 branch-river in the Taejon area from Nov. 1997 to Dec. 1998. Range of water temperature was $2.4^{\circ}C{\sim}30.9^{\circ}C$(means of $16.02^{\circ}C{\sim}18.92^{\circ}C$), pH was 7.1~10.4(means of 7.40~8.68). BOD was generally under $5mg/{\ell}$ except Gap-chon kyo in Nov. and COD was measured highly by interfer of men at the each sites. Especially, occasion of Gap-chon kyo, data was estimated about 3~13 times higher than another sites. DO was showed 1.03~10.43ppm, SS was showed $1.0{\sim}120.0mg/{\ell}$ TN was that, upper stream was 0.63ppm, middle was 0.35ppm and then lower was 0.44ppm, upper stream was higher than lower. TP was at upper stream 0.03ppm, middle 0.05ppm, lower 0.06ppm, lower stream was higher than another. The phytoplankton flora was identified as total 230 taxa composed of 7 classes, 18 oders 35 families, 75 genara, 184 species, 42 virieties, 4 forms. There are composed of that, Chlorophyceae 94 taxa(40.9%), Bacillariophyceae 66 taxa(28.8%), Euglenophyceae 39 taxa(17.0%), Cyanophyceae 24 taxa(10.4%), Chrysophyceae 4 taxa(1.7%), Rhodophyceae 2 taxa(0.8%) Xanthophyceae 1 taxa(0.4%), composition of Spesies of each sites was Gapchon-kyo 119, Wonchon-kyo 94, Gasuwon-kyo and Mannyon-kyo 87, Ochung-kyo 78, Hyunam-kyo and Suchim-kyo 77, Moonchang-kyo 70 taxa and Sansung-kyo 58 taxa. Number of species was showed tendency of increase lower stream. Taejon-chon and youdung-chon and at the sites of confluence were presented Synedra ulna and Diatom vugare like bacillariophyceae, Gap-chon was dominated variously Oscillatoria princeps and chlorophyceae, confluence of 3 branch-river was presented Euglenophyceae.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.5
• /
• pp.253-261
• /
• 2015

In this study, Chlorophyll-a (chl-a) prediction model and multiple parameters affecting algae occurrence in Mulgeum site were evaluated by statistical analysis using water quality, hydraulic and climate data at Mulgeum site (1998~2008). Before the analysis, control chart method and effect period of typhoon were adopted for improving reliability of the data. After data preprocessing step two methods were used in this study. In method 1, chl-a prediction model was developed using preprocessed data. Another model was developed by Method 2 using significant parameters affecting chl-a after data preprocessing step. As a result of correlation analysis, water temperature, pH, DO, BOD, COD, T-N, $NO_3-N$, $PO_4-P$, flow rate, flow velocity and water depth were revealed as significant multiple parameters affecting chl-a concentration. Chl-a prediction model from Method 1 and 2 showed high $R^2$ value with 0.799 and 0.790 respectively. Validation for each prediction model was conducted with the data from 2009 to 2010. Training period and validation period of Method 1 showed 20.912 and 24.423 respectively. And Method 2 showed 21.422 and 26.277 in each period. Especially BOD, DO and $PO_4-P$ played important role in both model. So it is considered that analysis of algae occurrence at Mulgeum site need to focus on BOD, DO and $PO_4-P$.

• Restorative Dentistry and Endodontics
• /
• v.33 no.3
• /
• pp.177-183
• /
• 2008

It was reported that esthetic composite resin restoration reinforces the strength of remaining tooth structure with preserving the natural tooth structure. However, it is unknown how much the strength would be recovered. The purpose of this study was to compare the fracture resistance of three types of undermined cavity filled with composite resin with that of non-cavitated natural tooth. Forty sound upper molars were allocated randomly into four groups of 10 teeth. After flattening occlusal enamel, undermined cavities were prepared in thirty teeth to make three types of specimens with various thickness of occlusal structure (Group $1{\sim}3$). All the cavity have the 5 mm width mesiodistally and 7 mm depth bucco-lingually. Another natural 10 teeth (Group 4) were used as a control group. Teeth in group 1 have remaining occlusal structure about 1 mm thickness, which was composed of mainly enamel and small amount of dentin. In Group 2, remained thickness was about 1.5 mm, including 0.5 mm thickness dentin. In Group 3, thickness was about 2.0 mm, including 1 mm thickness dentin. Every effort was made to keep the remaining dentin thickness about 0.5 mm from the pulp space in cavitated groups. All the thickness was evaluated with radiographic Length Analyzer program. After acid etching with 37% phosphoric acid, one-bottle adhesive (Single $Bond^{TM}$, 3M/ESPE, USA) was applied following the manufacturer's recommendation and cavities were incrementally filled with hybrid composite resin (Filtek $Z-250^{TM}$, 3M/ESPE, USA). Teeth were stored in distilled water for one day at room temperature, after then, they were finished and polished with Sof-Lex system. All specimens were embedded in acrylic resin and static load was applied to the specimens with a 3 mm diameter stainless steel rod in an Universal testing machine and cross-head speed was 1 mm/min. Maximum load in case of fracture was recorded for each specimen. The data were statistically analyzed using one-way analysis of variance (ANOVA) and a Tukey test at the 95% confidence level. The results were as follows: 1. Fracture resistance of the undermined cavity filled with composite resin was about 75% of the natural tooth. 2. No significant difference in fracture loads of composite resin restoration was found among the three types of cavitated groups. Within the limits of this study, it can be concluded the fracture resistance of the undermined cavity filled with composite resin was lower than that of natural teeth, however remaining tooth structure may be supported and saved by the reinforcement with adhesive restoration, even if that portion consists of mainly enamel and a little dentin structure.