• 한국항공우주학회지
• /
• 제35권3호
• /
• pp.268-274
• /
• 2007

일반적으로 로켓과 위성 전자 회로 설계 단계에서 전자 소자의 신뢰도를 높이기 위해 소자의 작동온도를 낮추는 방법이 많이 사용된다. 본 논문에서는 소자 온도뿐 아니라 활성화에너지가 전자 장비 신뢰도에 미치는 영향에 대해 상세히 분석하였는데 실제 소자의 온도보다는 소자의 활성화에너지가 신뢰도에 훨씬 많은 영향을 끼치는 것으로 분석되었으며 이에 대한 분석결과를 정량적으로 기술하였다. 또한 PCB에 소자 배치 시 신뢰도를 높이기 위한 소자 배치 방법과 이에 따른 신뢰도 향상 결과에 대해서도 기술하였다.

• 동굴
• /
• 제78호
• /
• pp.1-8
• /
• 2007

The combination of mechano-chemical activation (MCA)and Self-propagating High-temperature Synthesis (SHS) has widened the technical possibilities for both methods. For YBCO systems the investigation showed that a short-term MCA of initial powders before SHS leads to single-phase and ultra-fine products. A new technique for preparation ultra-fine high-temperature superconductors (HTS) of YBCO composition with a grain size d <1m is developed using combination of MCA and SHS. The specific feature of the technique is formation of the $YBa_2Cu_3O_7-$ crystalline lattice directly from an X-ray amorphous state arising as a result of mechanical activation of the original oxide mixture. The technique allows the stage of formation of any intermediate reaction products to be ruled out. X-ray and magnetic studies of ultra-fine high temperature superconductors are carried out. Dimension effects associated with the microstructure peculiarities are revealed. A considerable enhancement of inter-grain critical currents is found to take place in the ultra-fine samples.

• 한국식품영양학회지
• /
• 제16권4호
• /
• pp.321-327
• /
• 2003

The reaction rates of 4-ethyl pyridine with p-methyl benzylbromide have been measured by conductometry in acetonitrile, and the rate constants of these reactions are determined in accordance with various temperatures (20, 25, 30$^{\circ}C$) and pressures (1, 200, 500, 1000 bar). The rate constants increased with the higher pressure and temperature. The activation energies and activation parameter values of these reactions are calculated by determination of the rate constants the same. The activation volume, activation compressibility coefficient and the activation entropy are all negative. The result of kinetic studies for the pressure show that this reaction proceeds in typical bimolecular nucleophilic substitution reaction.

• 폴리머
• /
• 제24권1호
• /
• pp.97-104
• /
• 2000

산화처리 된 평직형태의 탄소섬유와 resole 형태의 페놀수지를 7:3 중량비로 혼합하여 성형공정에 따라 탄소섬유/페놀수지 복합재료를 제조하였으며, 이를 다시 불활성 분위기에서의 탄화(100$0^{\circ}C$) 및 $CO_2$ 분위기에서 활성화(700, 800,, 900 및 100$0^{\circ}C$)시켜 PAN계 활성탄소섬유/페놀수지 복합재료를 제조하였다. 본 연구에서는, 이렇게 제조된 복합재료에 활성화 온도가 미치는 영향을 중화 적정법에 따른 pH, 표면 산도 및 표면 염기도 등의 표면성질과 BET 방법에 따른 비표면적, 기공구조 등의 흡착특성을 측정하여 고찰하였다. 또한, ASTM에 따라 시편에 걸리는 압력 손실을 측정하였다. 결과적으로, 활성화 온도는 그 표면 성질의 변화에 영향을 주어, 90$0^{\circ}C$ 이상의 온도에서 시료의 표면은 점차 염기성이 커지는 것을 확인할 수 있었다. 또한, 비표면적, 총 기공 부피 및 기공 크기 분포도 등의 발달은 활성화 온도의 증가에 따라 점차 증가함을 쉽게 확인할 수 있으며, 그 중 활성화 온도가 90$0^{\circ}C$인 경우 가장 발달한 것으로 나타났다. 마찬가지로, 활성화 온도의 증가에 따라 시편 양 단면에 걸리는 압력손실은 점차 감소하였으며, 이것은 열처리 온도에 의한 활성탄소섬유 복합재료의 질량손실에 의한 것으로 사료된다.

• Carbon letters
• /
• 제22권
• /
• pp.70-80
• /
• 2017

Activated carbons (ACs) have been used as electrode materials of electric double-layer capacitors (EDLC) due to their high specific surface areas (SSA), stability, and ecological advantages. In order to make high-energy-density ACs for EDLC, petroleum pitch (PP) pre-carbonized at $500-1000^{\circ}C$ in $N_2$ gas for 1 h was used as the electrode material of the EDLC after KOH activation. As the pre-carbonization temperature increased, the SSA, pore volume and gravimetric capacitance tended to decrease, but the crystallinity and electrode density tended to increase, showing a maximum volumetric capacitance at a medium carbonization temperature. Therefore, it was possible to control the crystalline structure, SSA, and pore structure of AC by changing the pre-carbonization temperature. Because the electrode density increased with increasing of the pre-carbonization temperature, the highest volumetric capacitance of 28.4 F/cc was obtained from the PP pre-carbonized at $700^{\circ}C$, exhibiting a value over 150% of that of a commercial AC (MSP-20) for EDLC. Electrochemical activation was observed from the electrodes of PP as they were pre-carbonized at high temperatures above $700^{\circ}C$ and then activated by KOH. This process was found to have a significant effect on the specific capacitance and it was demonstrated that the higher charging voltage of EDLC was, the greater the electrochemical activation effect was.

• Carbon letters
• /
• 제28권
• /
• pp.116-120
• /
• 2018

Nitrogen-doped carbons have attracted much attention due to their novel application in relation to gas storage. In this study, nitrogen-doped porous carbons were synthesized using SBA-15 as a template, polypyrrole as the carbon and nitrogen precursor, and KOH as an activating agent. The effect of the activation temperature ($600-850^{\circ}C$) on the $CO_2$ adsorption capacity of the obtained porous carbons was studied. Characterization of the resulting carbons showed that they were micro-/meso-porous carbon materials with a well-developed pore structure that varied with the activation temperature. The highest surface area of $1488m^2g^{-1}$ was achieved at an activation temperature of $800^{\circ}C$ (AC-800). The nitrogen content of the activated carbon decreased from 4.74 to 1.39 wt% with an increase in the activation temperature from 600 to $850^{\circ}C$. This shows that nitrogen is oxidized and more easily removed than carbon during the activation process, which indicates that C-N bonds are more easily ruptured at higher temperatures. Furthermore, $CO_2$ adsorption isotherms showed that AC-800 exhibited the best $CO_2$ adsorption capacity of $110mg\;g^{-1}$ at 298 K and 1 bar.

• Tribology and Lubricants
• /
• 제14권3호
• /
• pp.7-16
• /
• 1998

The electrorheological (ER) behavior of suspensions in silicone oil of phosphoric ester cellulose powder (average particle size: 17.77 $\mu$m) was investigated at room temperature with electric fields up to 2.5 KV/mm. For development of anhydrous ER suspensions using at wide temperature range, we aimed to know the effect of activation of phosphoric ester cellulose particles on the ER activities. As a first step, the anhydrous ER suspensions mixing with the phosphoric ester cellulose particles which were treated with 2M phosporic acid and 4M urea were measured. After activating the anhydrous ER suspensions at 12$0^{\circ}C$, not only the analysis of dispersing cellulose particles which were reacted by phosphoric ester but also the electrorheological characteristics of ER suspensions such as dielectric constant, current density, electrical conductivity and rheological properties were studied. From the experimental results, the activation of phosphoric ester cellulose particles had an influence on the ER properties of anhydrous ER suspensions. As the activation time went by, the size and number of dispersing particles, the electrical properties and the initial apparent viscosity $(η_0)$ of ER suspensions were increased till the activation time passed 5 hours. Also, it was possible, the electrorheological effect $($\tau$/$\tau$_0)$ of ER fluids was grown by the activation of phosphoric ester cellulose particles.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.177-180
• /
• 2002

Microwave has been utilized for low-temperature crystallization of amorphous Si films. Microwave annealing lowered the crystallization temperature and shortened the annealing time. The combination of Ni and microwave applications on a-Si films further enhanced the crystallization. The enhancement was due to both reduced nucleation activation energy and growth activation energy.

• 한국안전학회지
• /
• 제10권2호
• /
• pp.84-91
• /
• 1995

The characteristics of critical spontaneous ignition of granulated activated carbon were investigated In atmospheres of differing oxygen concentration. At the same concentration the larger vessels yielded the lower critical spontaneous ignition temperature. At the same vessel, as the concentration of oxygen was reduced, Ignition occurred later and at higher ambient temperature, and critical spontaneous ignition temperature increased. The apparent activation energy calculated from the Frank-Kamenetskii's ignition theory appeared to be the slight different value respectively and the mean apparent activation energy was 19850㎈/㏖.

• 한국전기전자재료학회논문지
• /
• 제15권5호
• /
• pp.441-448
• /
• 2002

The electrical properties of the GaN-based green light emitting diodes(LEDs) with the Mg-doped p-GaN layer activated in $N_2$ or $O_2$ ambient have been compared. For the $N_2$ -ambient activation the current-voltage behavior of LEDs has been found to be improved when the Mg dopants activation was performed in the higher temperature. However, for the $O_2$-ambient activation the current-voltage characteristic has been observed to be enhanced when the Mg dopants activation was carried out in the lower temperature. The minimum forward voltage at 20mA was obtained to be 4.8 V for LEDs with the p-GaN layer activated at $900^{\circ}C$ in the $N_2$ ambient and 4.5V for LEDs with the p-GaN layer treated at $700^{\circ}C$ in the $O_2$ambient, repectively. The forward voltage reduction of the LEDs treated in the $O_2$-ambient may be related to the oxygen co-doping of the p-GaN layer during the activation process. The $O_2$ -ambient activation process is useful for the enhancement of the LED performance as well as the fabrication process since this process can activate the Mg dopants in the low temperature.