• Journal of Astronomy and Space Sciences
• /
• v.39 no.4
• /
• pp.141-144
• /
• 2022

By providing an environment where energetic particles and micrometeorites can not penetrate, caves on Mars may serve as a human shelter in future Mars explorations. More than 1,000 cave entrance candidates have been detected; however, their physical characteristics that can be utilized in detecting more candidates have not been explored in detail. In this paper, we explore the nighttime temperature of 100 cave entrance candidates and their surrounding areas to investigate 1) the nighttime temperature tendencies relative to their surrounding areas and 2) the extent of these temperature differences. We find that 79% of the cave entrance candidates exhibit higher temperatures than the surrounding areas, and 59% show a temperature difference over 20K, suggesting that the cave entrances may generally show higher temperatures than the surrounding areas during the nighttime.

• The Korean Journal of Food And Nutrition
• /
• v.17 no.1
• /
• pp.32-40
• /
• 2004

This Study was conducted to predict temperature profile of Jangjorim (boiled beef in soy sauce) food during retorting using the commercial NISA (Numerical Integrated Elements for System Analysis) program. NISA program is a good tool to simulate the temperature profile of a specific material based upon the finite element method. The cold point of Jangjorim food located not at the geometrical center but at 26.9 mm backward in y plane because specific heat of soy sauce was 20% higher than that of boiled beef. The effects of heat transfer coefficients on heat transfer during retorting process of Jangjorim were analyzed by response surface methodology (RSM). Independent variables were thermal conductivity of soy sauce, thermal conductivity of boiled beef, and convection heat transfer coefficient and dependent variables were temperature error and lethality error. Thermal conductivity of soy sauce was the most significant contributor among those (P<0.01).

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.5
• /
• pp.90-99
• /
• 1984

A onetimensional distribution of the temperature and the heat source in the SOI (silicon-on-insulator) multi-layer structure illuminated by tungsten lamps from both sides was obtained by solving the heat equation in steady state on a finite difference grid using successive over-relaxation method. The heat source distribution was obtained by considering such features as spectral components of the light source, multiple reflection at the internal interfaces, temperature and frequency dependence of the light absorption coefficient, etc. The front and back surface temperatures, which are boundary conditions for the heat equation, were derived from a requirement that they satisfy the radiation conditions. The radiation flux as well as the conduction flux was considered in modelling the thermal behaviour at the internal interfaces. Since the temperature and the heat source profiles are strongly dependent upon each other, the calculation of each profile was iterated using the updated profile of the other until they are consistent with each other. The experimental temperature at the front surface of the wafer as measured by Pyrometer was about 1200$^{\circ}$K, while the simulated temperature was 1120$^{\circ}$K.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.6
• /
• pp.621-629
• /
• 2019

A logical measure is suggested to estimate an accurate Sound Speed Profile (SSP) for the unusual variation of salinity in the Yellow Sea. Based on National Aeronautics and Space Administration (NASA)'s Aqua and Soil Moisture Active Passive (SMAP) satellite data, this measure identifies the area of temperature inversion effect and expansion of low salinity (<30.5 psu) water. Subsequently, on the area, the Conductivity, Temperature, and Depth (CTD) mounted unmanned maritime system estimates accurate SSP. In order to carry out this measure conveniently, a flow chart is demonstrated in this research. By using this measure which finds the high variational salinity area, the inaccuracy issue for calculating SSP from Expandable Bathy Thermograph (XBT) is expected to be solved.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.8
• /
• pp.757-762
• /
• 2011

We investigate the transient temperature response in biological tissue whose surface is exposed to alternately varying sinusoidal oscillation. Based on the Pennes bio-heat equation, we apply numerical analysis using a finite element method to find the effects of the physical properties of the skin layers. Three layers of tissue-epidermis, dermis, and subcutaneous-are considered as the solution region. We investigate the effects of different properties of the skin layers on the temperature profile. We also investigate the effects of the perfusion rate for the dermis, which is the most sensitive layer. The results show that the temperature profile of tissue depth has a discontinuous point when different physical properties are used.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.6
• /
• pp.34-40
• /
• 1985

Characteristics of GaAE epilayers grown on (100) CaAs wa(tors by molecular beam epitaxy (MBE) under various single crystal growing conditions were investigated. In fabrica-ting GaAs, epilayer by MBE, the most important factors are a substrate temperature(ts) and a flux density ratio (As/Ga). In this experiment, the substrate temperature was varied in the range of 48$0^{\circ}C$ to $650^{\circ}C$ and As and Ga cell temperatures were varied in the range of 218$^{\circ}C$ to 256$^{\circ}C$ and 876$^{\circ}C$ to 98$0^{\circ}C$, respectively. At the substrate temperature of 54$0^{\circ}C$, As cell temperature of 23$0^{\circ}C$, and Ga cell temperature of 91$0^{\circ}C$, the As/Ga ratio was 5"10, the surface morphology was most smooth . Investigation of As-stabilized surface by RHEED and of depth profile by SIM5 showed that As is less stable than Ga. Also, X-ray diffraction measurement revealed that single crystals of (400) and (200) were formed at the both sub-strate temperatures of 52$0^{\circ}C$ and 54$0^{\circ}C$.TEX>.

• Journal of Sensor Science and Technology
• /
• v.5 no.5
• /
• pp.69-77
• /
• 1996

In this paper, we fabricated the micro hotplate which consisted of a thin film heater(Pt/Cr bilayers) sandwiched with the thermal oxide and E-beam evaporated oxide. And we studied the electrical and the structural properties of Pt/Cr bilayers due to annealing temperature. When we compared the temperature measured from type k thermocouples with the temperature acquired from I.R. thermo-vision system according to the variations of emissivity, the emissivity of I-beam evaporated oxide was 0.5. The sheet resistance of Pt/Cr bilayers didn't depend on the Cr layer thickness, and it was considered as the existence of CrO between the Pt and the Cr layer. When the annealing temperature was increased from $500^{\circ}C$ to $700^{\circ}C$, the out-diffusions of Cr were increased(which was confirmed by AES depth profile) and the grain size of Pt(220) phase was enlarged also(analyzed by XRD and SEM photographs). From the results of XRD analysis and AES depth profile, the Pt/Cr bilayers annealed at $500^{\circ}C$ were more stable than any other cases in structural properties.

• Journal of Power System Engineering
• /
• v.3 no.1
• /
• pp.16-22
• /
• 1999

The purpose of this study is to prevent the stick, scuffing, scratch between piston and cylinder, is to contribute the piston design such as piston profile, clearance by calculating reaction force by over-lap of piston skirt, as measuring the temperature distributions of cylinder wall. The experiment has been peformed to obtain data during actual engine operation. Temperature gradient in peripheral and axial distributions of cylinder wall according to torque and speed of engine were measured by use of an 800cc class gasoline engine. The results obtained are summarized as follows ; 1) The temperature of cylinder wall at TDC was about $50{\sim}75^{\circ}C$ higher than temperature of cooling water. 2) The rear side temperature of top dead center was $141^{\circ}C$(1/4 load) in axial distribution, whereas the rear side of midway position temperature was $98^{\circ}C$. 3) The temperature of cylinder wall increased in according to rising temperature of cooling water. 4) The thrust side temperature of cylinder wall was about $15^{\circ}C$ in all load test. 5) The rear side temperature of top dead center was $159^{\circ}C$ (1/2 load) in peripheral distribution, it was about $39^{\circ}C$ higher than thrust side temperature.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.242-245
• /
• 1998

Interferometric Monitor for Greenhouse Gases (IMG) is a sensor to monitor the earth's radiation balance, the temperature profile of the atmosphere, the temperature of the earth's surface, and physical properties of clouds, and was loaded on ADEOS satellite. In this paper, we estimated IMG level 2 data by comparing with a Clobal Telecommunications System data (GTS). The IMG level 2 data over sea without cloud cover gave good agreement with the value that had been obtained by buoy and sonde.

• Journal of the Korean Ceramic Society
• /
• v.28 no.12
• /
• pp.989-995
• /
• 1991

By means of the secondary ion mass spectrometer, the tracer diffusion of oxygen in rutile single crystal was measured as function of temperature and oxygen partial pressure. The tracer diffusivity was determined from the depth profile of 18O. The Po2 dependence of D suggests that the dominant defects in TiO2-y are oxygen vacancies (V{{{{ { ‥} atop { o} }}) and interstitial titanium ions (Ti{{{{ {‥‥} atop {i} }}). The doubly ionized oxygen vacancies are prominent at low temperature and Po2. However, the tetravalent interstitial titanium ions predominate at teperature above 120$0^{\circ}C$.