• Proceedings of the Korean Geotechical Society Conference
• /
• 2007.09a
• /
• pp.558-569
• /
• 2007

It is important to obtain real-time data from long-term monitoring of landfills and develop leachate leakage detection system for the integrated management of landfills. A novel real time monitoring system and early leakage detection system was suggested in this study. The suggested monitoring system is composed of two parts; (1) a set of moisture sensors which monitor the areas surrounding the landfill, and (2) a set of moisture and temperature sensors which monitor the landfill inside. For the assessment for landfills stabilization, real-time monitoring system was evaluated in dry and wet cell of pilot-site. In addition, the grid-net electrical conductivity measurement system was also suggested as early leakage detection system. In this study, the field applicability of suggested systems was evaluated through pilot-scale field tests. The results of pilot-scale field model tests indicate that the grid-net electrical conductivity measurement method can be applicable to the detection of landfill leachate at the initial stage of intrusion, and thus has a potential for monitoring leachate leakage at waste landfills.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.355-360
• /
• 1998

A small package of plasma instruments, Space Physics Sensor, will monitor the space environment and its effects on microelectronics in the low altitude region as it operates on board the KOMPSAT-1 from 1999 over the maximum of the solar cycle 23. The Space Physics Sensor (SPS) consists of two parts: the Ionospheric Measurement Sensor (IMS) and the High Energy Particle Detector (HEPD). IMS will make in situ Measurements of the thermal electron density and temperature, and is expected to provide a global map of the thermal electron characteristics and the variability according to the solar and geomagnetic activity in the high altitude ionosphere of the KOMPSAT-t orbit. HEPD will measure the fluxes of high energy protons and electrons, monitor the single event upsets caused by these energetic charged particles, and give the information of the total radiation dose received by the spacecraft. The continuous operation of these sensors, along with the ground measurements such as incoherent scatter radars, digital ionosondes and other spacecraft measurements, will enhance our understanding of this important region of practical use for the low earth orbit satellites.

• Korean Journal of Digital Imaging in Medicine
• /
• v.5 no.1
• /
• pp.138-149
• /
• 2002

During the period from may to June 2000, a questionnaire study was carried out on 65 male radiological technologist who had been engaged at VDT work, to find out correlation their symptoms to VDT syndrome factors, work environment and condition. The results were as follows : 1. The mean age was 41.0 years, the mean relay working time was 3.75 hours and the mean duration of using computer monitor was 5.9 years, the satisfactory of working was 44.6% the others 55.4%, among these, 3.1% had symptoms before using the VDT and the others had not. 2. The prevalence of symptoms was the highest on wholebody tired, followed by eye, neck, low back, in decreased order and the lowest was fatique of wrist. 3. There was not significant correlation of symptoms to age, but significant to working time, working duration. 4. There was not significant correlation of symptoms to satisfactory. 5. Working desk, monitor, illuminations, temperature, and noise were significantly related to symptoms. 6. There was significant relation of symptoms to CT, MRI workers.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.178-180
• /
• 2021

In this paper, we design a system to monitor environmental data in fish farms in real-time and provide machine learning-based prediction services to prevent damage on fish farms caused by changes in the sea environment. The proposed system will install an IoT device module consisting of sensors that can measure hydrogen concentration, salinity, dissolved oxygen, and water temperature, which can be transferred to Cloud DB using LTE or LoRa communication technology and then monitor the real-time condition through a web or mobile application. In addition, it has a function to prepare for changes within the environment of fish farms by applying machine learning-based prediction technology using collected data.

• International Journal of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.59-67
• /
• 2024

Current straw mushroom farming in countries with large rice growing areas has great development potential, and was once considered a way to generate additional income and reduce poverty in rural areas. However, currently most people still grow mushrooms using traditional processes, leading to low productivity and unguaranteed output quality. Currently, due to climate change and unusual weather changes, people tend to switch to growing straw mushrooms indoors. In the process of growing straw mushrooms indoors, the design of an automatic control and monitoring system is very important to ensure the growing process is carried out effectively and achieves high yields. In this paper, we propose a system that can automatically control and monitor the humidity and temperature of the indoor straw mushroom growing process and other parameters that can be monitored through a network system using Internet of Things. The control algorithm automatically adjusts the grow house equipment based on feedback from sensors to maintain an optimal environment for growing straw mushrooms. Experimental results show that the straw mushroom growing system with automatically controlled and monitored environmental parameters helps improve efficiency, reduce costs and increase the sustainability of the current straw mushroom growing industry.

• Journal of Astronomy and Space Sciences
• /
• v.23 no.4
• /
• pp.425-434
• /
• 2006

The KASINICS (KASI Nea.-Infrared Camera System) is a ground-based instrument developed by the Korea Astronomy and Space Science Institute (KASI). We developed a temperature and vacuum monitoring system for operating the KASINICS. The system consists of hardware and software parts. The acquired data we saved on a hard disk in a real-time mode. This system on also be applied to general cryogenic instruments. We tested our monitoring system for the cooling and vacuum performance of the KASINICS. The results show that our system is efficient and stable for the operation of the KASINICS.

• Journal of Korea Multimedia Society
• /
• v.12 no.10
• /
• pp.1478-1485
• /
• 2009

A sensor network which is composed of a large number of sensors that perform various sensing is applied in a variety of fields. The sensor networks can be widely used for various application area like as home automation, fire detection and security area. Development of new sensor to have appropriate functions and deployment of networks for suitable application are served actively. In this paper, we design and implement a system that monitors various factory facilities by deploying sensor network at a working place which threatens the worker's safety. A sensor node reports its sensing data like as temperature and humidity to monitor facilities to a sink node. And the server which is connect to the sink node gathers and provides information by user interface. In addition, digital data which are generated at a work place can be transferred via the sensor network to increase the efficiency of works. The proposed sensor network provides the convenience of working, since it is deployed at a garbage collection company to monitor a temperature and humidity of garbage and to transmit data about the weight of trucks which enters the company.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.503-506
• /
• 2001

There are four factors for patient monitoring : electrocardiography, blood pressure, temperature and respiration. While there are a lot of studies of E.C.C (electro-cardiography) monitoring system in the world, the studies of Respiratory system are not enough and leave much to be desired in the country. In this paper, we developed a respiratory system with the electrical impedance change of the lungs depending on the breath. Using the same electrode, we can monitor E.C.C and Respiration simultaneously, so we can monitor a patient's no-breathing state due to the central nerve paralysis in the emergency room easily. In this monitoring system, the analog part was made separated from the digital part for reducing power source noise and protecting patient from electric shock. The analog part consists of the several parts a high-frequency sine-wave generator, all amplifier for amplifying any impedance change signal, an analog processing part for rectifying and filtering. And the digital parts consists of three parts an AD convertor for converting analog signal to digital signal, digital filter, and a digital part for digital signal processing. This system's merits are using the same electrode with E.C.C and developing the multiple patient monitoring system easily.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.5
• /
• pp.489-494
• /
• 2004

Long Period Gratings (LPG) is currently receiving considerable attention because of their consistent measuring results fur pressure, temperature, strain and flow. LPG is easier to prepare and has a high sensitivity compared with Fiber Bragg Gratings (FBG). In addition, this kind of optical fiber sensors could be used for implementations in various structures. In this paper, LPG was used to monitor in situ the resin flow and the curing process in VARTM (Vacuum Assisted Resin Transfer. Molding). In order to demonstrate the effectiveness of the method, FBG is inserted into the glass mat to monitor the resin flow using optical spectrum analyzer (OSA). The curing reactions in VARTM are also observed using the same method. From the results, the attenuation wavelength shift and the loss change of attenuation band can be obtained from the status of the RTM (Resin Transfer Molding) sample owing to the internal variations of the .effective index, temperature, and pressure. It is shown that the proposed LPG is more effective in monitoring the curing reaction than FBG.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.5
• /
• pp.499-509
• /
• 2019

This paper discusses energy use monitoring and analysis as part of a study on a low-cost energy supply management system that links an existing database with weather information with no real-time monitor for energy demand of buildings using renewable energy, generator and energy storage systems. This study is targeted at small and medium-sized buildings and aims to monitor energy use with a small number of sensors at low cost by applying an energy management system (EMS). The present study can help overcome the limitations of high-cost EMS applied to large commercial and public buildings. We developed current, indoor temperature and human motion sensors and installed them in an office of a company in a sample building. Through these sensors, we analyzed energy use patterns and the effects of weather information and human motion on the energy use. Furthermore, we analyzed the correlations between the total KEPCO energy use of the sample building and weather by comparing these two data. The results showed that the office energy use of a company was more affected by human motions than by weather information. The comparison between the total energy use of the Building and weather information found that external temperature had an effect on the energy use.