• 제목/요약/키워드: Telecommunication band

검색결과 336건 처리시간 0.022초

집중 소자형 음의 군지연 회로 설계 (Analysis of Lumped Element Negative Group Delay Circuit)

  • 정용채;최흥재;김철동
    • 전기학회논문지
    • /
    • 제59권2호
    • /
    • pp.374-379
    • /
    • 2010
  • In this paper, we have mathematically analyzed lumped element type negative group delay circuit (NGDC) and derived general design equation. The applicability of the proposed design equation is validated with mathematical and circuit simulation as well as with experimental results for intentional mobile telecommunication 2000 (IMT-2000) downlink band. As a design example, single branch NGDC with -0.8ns of group delay (GD) for narrow bandwidth of the specific frequency is simulated and fabricated. Finally, $\pi$-network NGDC is proposed and validated to obtain wideband GD response of $-1.7{\pm}0.06$ nsec for 60 MHz.

스마트 그리드 응용에 적합한 고속Hybrid MAC 구현에 관한 연구 (A Study on the Implementation of High-Speed Hybrid MAC for Smart Grid Application)

  • 권대길;김용성;조진웅;홍대기
    • 반도체디스플레이기술학회지
    • /
    • 제13권1호
    • /
    • pp.73-81
    • /
    • 2014
  • In this paper, high-speed Hybrid MAC (Medium Access Control layer) implementation suitable for smart grid applications is researched. MB-OFDM (Multi-Band Orthogonal Frequency Division Multiplexing) is considered for high-speed communication method in smart grid application. In this paper, the MAC adopts the distributed network managing method. Also, the MB-OFDM merit of high-speed transfer rate of up to 480Mbps must be supported. Hence, this paper presents an efficient hardware-software integration (co-design) method in order to realize a high- speed transmission, and a realizing method of distribution network. Finally, MAC performance and reliability based on MB-OFDM PHY (PHYsical layer) are confirmed through simulation and emulation.

DS-CDMA Ultra Wide Band RF 트랜시버 구현 및 성능 평가

  • 이일규;한상철
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 한국정보통신설비학회 2005년도 하계학술대회
    • /
    • pp.422-426
    • /
    • 2005
  • 초고속통신, 고 정밀 위치정보 시스템 등을 구현하기 위해 광 대역 특성을 요구하는 UWB(Ultra Wideband) 시스템에 대한 연구가 활발히 진행되고 있다. 본 논문에서는 DS-CDMA(Direct Sequence - Code Division Multiple Access)를 근간으로 하는 3 GHz $\sim$ 5GHz의 주파수 대역을 갖는 UWB 시스템에서 아날로그 QPSK(Quadrature Phase Shift Keying) 변복조, 주파수 변환 및 전력 증폭 기능을 수행하는 RF 트랜시버 설계 방안을 제시하였고, 광 대역 특성을 만족하는 주요 구성 성분들의 설계 방법 및 성능 특성을 분석하였다. 상용 부품 및 제작된 부품 들을 이용하여 구현된 RF 트랜시버에 대한 성능평가를 통해 DS-CDMA 방식의 UWB 시스템을 위한 RF 트랜시버 설계 및 구현 접근 방법을 검증하였다.

  • PDF

내장형 WiFi 휴대단말의 필드 성능평가 방법 및 안테나 위치 최적화 연구 (Study on the Performance Evaluation Method of Embedded WiFi Terminal and Optimizing Antenna Location)

  • 김영재;주원용;김정준;이상홍
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 한국정보통신설비학회 2005년도 하계학술대회
    • /
    • pp.436-442
    • /
    • 2005
  • 컨버전스시대의 도래에 따라 다양한 유무선통합서비스를 지원하기 위한 embedded WiFi 기술이 모바일 PC, PDA, 핸드폰, TV, PMP, 카메라, 비디오 게임기 및 로봇 장남감에 이르기 까지 다양하게 적용되고 있다. 이에 다양한 단말의 형태를 고려한 무선구간의 성능확보가 요구되고 있는 실정으로 본 논문에서는 DBDM (Dual Band Dual Mode) 단말인 NESPOT Swing 단말을 근간으로 안테나 위치 최적화에 대한 기술과 단말 RF 및 기지국 안테나의 특성을 고려한 필드 성능 측정 방법에 대하여 기술하고, 이론적 분석과 실측정치를 제시하고자 한다. 본 연구의 결과는 앞으로 다양한 환경에서 사용이 예상되는 WiFi 기지국의 설치 및 embedded WiFi 단말의 안테나 구성과 RE모듈 성능 확보에 활용될 수 있을 것으로 기대된다.

  • PDF

LTCC Chip 형태의 2.45GHz 대역 Balun-BPF의 설계 (A Design of Balun-BPF for 2.45GHz Band of LTCC structure)

  • 정을영;최경;황희용
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 한국정보통신설비학회 2005년도 하계학술대회
    • /
    • pp.133-136
    • /
    • 2005
  • This paper presents a LTCC Balun-BPF, which is a BPF(bandpass filter) with a Balun in a single LTCC chip for the direct interface with a MIC chip having balanced inputs. The physical dimension of the designed Balun-BPE is $2.4{\times}2.0{\times}0.88m^3$ and the used dielectric constant ${\varepsilon}_r$ is 36. A Balun of three-lines structure with striplines and a BPF of comb-line structure was combined into the Balun-BPF. The simulated result shows 4.8dB of insertion loss, $178{\sim}179$ degree of the phase imbalance, 14dB of the return

  • PDF

Performance Evaluation of ATM Switch Structures with AAL Type 2 Switching Capability

  • Sonh, Seung-Il
    • Journal of information and communication convergence engineering
    • /
    • 제5권1호
    • /
    • pp.23-28
    • /
    • 2007
  • In this paper, we propose ATM switch structure including AAL type 2 switch which can efficiently transmit low-bit rate data, even if the network has many endpoints. We simulate the architecture of ATM switch fabric that is modeled in computer program and analyze the performance according to offered loads. ATM switch proposed in this paper can support cell switching for all types of AAL cells which consist of AAL type 1, AAL type 2, AAL type 3/4, and AAL type 5 cells. We propose two switch fabric methods; One supports the AAL type 2 cell processing per input port, the other global AAL type 2 cell processing for every input port. The simulation results show that the latter is superior to the former. But the former has a strong point for easy implementation and extensibility. The proposed ATM switch fabric architecture is applicable to mobile communication, narrow band services over ATM network.

Face Recognition Based on PCA on Wavelet Subband of Average-Half-Face

  • Satone, M.P.;Kharate, G.K.
    • Journal of Information Processing Systems
    • /
    • 제8권3호
    • /
    • pp.483-494
    • /
    • 2012
  • Many recent events, such as terrorist attacks, exposed defects in most sophisticated security systems. Therefore, it is necessary to improve security data systems based on the body or behavioral characteristics, often called biometrics. Together with the growing interest in the development of human and computer interface and biometric identification, human face recognition has become an active research area. Face recognition appears to offer several advantages over other biometric methods. Nowadays, Principal Component Analysis (PCA) has been widely adopted for the face recognition algorithm. Yet still, PCA has limitations such as poor discriminatory power and large computational load. This paper proposes a novel algorithm for face recognition using a mid band frequency component of partial information which is used for PCA representation. Because the human face has even symmetry, half of a face is sufficient for face recognition. This partial information saves storage and computation time. In comparison with the traditional use of PCA, the proposed method gives better recognition accuracy and discriminatory power. Furthermore, the proposed method reduces the computational load and storage significantly.

WPAN 용 송신기의 SSR을 만족시키기 위한 에러 성분들의 requirements (The Requirements of the error components for the SSR in WPAN)

  • 박용국;송민환;원광호;김형석
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 한국정보통신설비학회 2008년도 정보통신설비 학술대회
    • /
    • pp.570-572
    • /
    • 2008
  • The modulation quality of the I/Q modulator in a wireless transmitter usually affects system performance and it mostly depends on both a nonlinearity and a distortion, from the third order intermodulation($IM_3$) signal and the error components such as an input amplitude error and a local phase error, respectively. This paper focused on how much the Single Sideband Ratio(SSR), which indicates the signal distortion, changes according to the variation of the error components. Consequently, since a desired signal, side band signal at the I/Q modulator output are also represented with those power series coefficients and the error components, the effects of the error components on SSR to meet the EVM specification of the WPAN can be clearly analyzed.

  • PDF

이동 통신 단말용 센서 시스템을 위한 신호 잠금 방식의 검출 회로 (Signal lock-in detection circuit for mobile device sensor systems)

  • 정인일;손호현;최영환
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 한국정보통신설비학회 2008년도 정보통신설비 학술대회
    • /
    • pp.559-562
    • /
    • 2008
  • In this paper we propose a lock-in detection method for portable sensor systems and demonstrate with the portable detection module that has high sensitivity and robustness against the noise. The simple portable sensor module is manufactured using MCU(Micro Contorl Unit), OPAMP, MOSFET and a pair of infrared sensor. Manufactured sensor module is testified in the noisy environment caused by an external light and an white noise source. Without any type of band pass filters, we recover a signal of 33 $mV_{p-p}$ in 80 $mV_{p-p}$ white noise and get the DR(Dynamic Reserve) of 14 dB.

  • PDF

On Cyclic Delay Diversity with Single Carrier OFDM Based Communication Network

  • A. Sathi Babu;M. Muni Chandrika;P. Sravani;M. Sindhu sowjanyarani;M. Dimpu Krishna
    • International Journal of Computer Science & Network Security
    • /
    • 제24권2호
    • /
    • pp.95-100
    • /
    • 2024
  • Cyclic Delay Diversity (CDD) is a diversity scheme used in OFDM-based telecommunication systems, transforming spatial diversity into frequency diversity and thus avoiding intersymbol interference without entailing the receiver to be aware of the transmission strategy making the signal more reliable achieving full diversity gain in cooperative systems. Here the analyzation of the influence of CDD-SC scheme in Cognitive Radio Network (CRN) is done with the challenge of overcoming the complication called channel estimation along with overhead in CNR. More specifically, the closed-form expressions for outage probability and symbol error rate are divided under different frequencies among independent and identically distributed (i.i.d.) frequency selective fading channel model i.e., the signal is divided into different frequencies and transmitted among several narrow band channels of different characteristics. It is useful in the reduction of interference and crosstalk. The results reveal the diversity order of the proposed system to be mainly affected by the number of multipath components that are available in the CNR.