• Title/Summary/Keyword: Teeth extraction

Search Result 488, Processing Time 0.024 seconds

Impact of lattice versus solid structure of 3D-printed multiroot dental implants using Ti-6Al-4V: a preclinical pilot study

  • Lee, Jungwon;Li, Ling;Song, Hyun-Young;Son, Min-Jung;Lee, Yong-Moo;Koo, Ki-Tae
    • Journal of Periodontal and Implant Science
    • /
    • v.52 no.4
    • /
    • pp.338-350
    • /
    • 2022
  • Purpose: Various studies have investigated 3-dimensional (3D)-printed implants using Ti6Al-4V powder; however, multi-root 3D-printed implants have not been fully investigated. The purpose of this study was to explore the stability of multirooted 3D-printed implants with lattice and solid structures. The secondary outcomes were comparisons between the 2 types of 3D-printed implants in micro-computed tomographic and histological analyses. Methods: Lattice- and solid-type 3D-printed implants for the left and right mandibular third premolars in beagle dogs were fabricated. Four implants in each group were placed immediately following tooth extraction. Implant stability measurement and periapical X-rays were performed every 2 weeks for 12 weeks. Peri-implant bone volume/tissue volume (BV/TV) and bone mineral density (BMD) were measured by micro-computed tomography. Bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO) were measured in histomorphometric analyses. Results: All 4 lattice-type 3D-printed implants survived. Three solid-type 3D-printed implants were removed before the planned sacrifice date due to implant mobility. A slight, gradual increase in implant stability values from implant surgery to 4 weeks after surgery was observed in the lattice-type 3D-printed implants. The marginal bone change of the surviving solid-type 3D-printed implant was approximately 5 mm, whereas the value was approximately 2 mm in the lattice-type 3D-printed implants. BV/TV and BMD in the lattice type 3D-printed implants were similar to those in the surviving solid-type implant. However, BIC and BAFO were lower in the surviving solid-type 3D-printed implant than in the lattice-type 3D-printed implants. Conclusions: Within the limits of this preclinical study, 3D-printed implants of double-rooted teeth showed high primary stability. However, 3D-printed implants with interlocking structures such as lattices might provide high secondary stability and successful osseointegration.

Digital immediate implantation and aesthetic immediate loading on maxillary incisor displaced due to root fracture: a case report (치근파절로 변위된 상악 중절치의 디지털을 이용한 즉시 임플란트 식립 및 심미 수복 증례)

  • Jieun Song;Songyi Park;Chan Park;Kwidug Yun;Hyun-Pil Lim;Sangwon Park
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.39 no.4
    • /
    • pp.267-275
    • /
    • 2023
  • To obtain better esthetic results when immediately placing a dental implant, the soft tissue surrounding the implant must be conditioned during healing of the extraction socket. To this end, the emergence profile can be customized through immediate restoration of the provisional prosthesis, and good clinical results can be obtained at the time of definitive restoration in the future, resulting in high patient satisfaction. In this case, horizontal root fracture occurred after trauma to both maxillary central incisors. Immediate implant placement and loading was planned considering aesthetics and alveolar bone condition. By taking an impression using a digital intraoral scanner, a digital diagnostic wax-up was performed to make a more aesthetic prosthesis without applying external force to the traumatized teeth. Based on this, the ideal placement location was determined and immediate implant placement was performed using a 3D printed surgical guide. The provisional prosthesis was restored 5 days after placement, and the definitive zirconia crown was restored through soft tissue conditioning and customization using the shape of the provisional prosthesis for 3 months.

Trends of Dental Caries Prevalence in Children Under 14-Year-Old Using a Health Insurance Database (건강보험 데이터를 이용한 14세 이하 소아청소년의 치아 우식 유병률 경향성)

  • Seongeun Mo;Jaegon Kim;Daewoo Lee;Yeonmi Yang
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.50 no.4
    • /
    • pp.409-420
    • /
    • 2023
  • The purpose of this study is to analyze trends in the prevalence of dental caries and demand for dental caries treatment among children under 14 years old using Health Insurance Review and Assessment data. The analysis was conducted using treatment records from a random sample of approximately 1 million pediatric patients from a population that included all children and adolescents for each year from 2011 to 2020. In this study, the number of children diagnosed with K02 dental caries and the number of children receiving dental caries treatment across all ages have increased. However, the number of children aged 10 to 14 who received pulp treatment or extraction has decreased. In the National Survey of Children's Oral Health, the decay-missing-filled teeth index for 5- and 12-year-olds has stagnated or increased slightly, but the percentage of the population with active dental caries has decreased. Accessibility and local environments for dental caries treatment have generally improved compared to the past, but preventive dental care has stagnated over the past decade. Therefore, it is necessary to evaluate the effectiveness of oral health programs implemented in Korea to promote and prevent dental caries among children.

An Epidemiologic study on the Orthodontic Patients Who Visited Department of Orthodontics, Chosun University Dental Hospital Last 10 Years(1990${\sim}$1999) (최근 10년간 조선대학교 부속치과병원 교정과에 내원한 부정교합 환자에 관한 역학적 연구(1990${\sim}$1999))

  • Yoon, Young-Jooh;Kim, Kwang-Won;Hwang, Mee-Sun
    • The korean journal of orthodontics
    • /
    • v.31 no.2 s.85
    • /
    • pp.283-300
    • /
    • 2001
  • With socioeconomic development and change of esthetic recognition, the demand for orthodontic treatment and number of orthodontic patients has been increasing so rapidly. And frequency of malocclusion was changed. So this study was done in an attempt to provide an epidemiologic study so that we can accomodate their orthodontic needs adequately and to obtain the reliable quantitative information regarding the characteristics of orthodontic patients. Distribution and trends were examined in 3,070 malocclusion patients who had been examined and diagnosed at Department of Orthodontics, Dental Hospital, Chosun University over 10 year-period from 1990 to 1999. The results were as follows : 1. The number of patients per year was increasing trend and higher visiting rate in female(56.5%) than in male(43.5%). 2. Age distribution had shown 7${\sim}$ 12 year-old group being the largest(37.9%) and each percentage of 13${\sim}$18, 19${\sim}$24, above-19, 0${\sim}$6 year${\sim}$old group was 32.0%, 19.6%, 7.1%, 3.4%. 3. Hellman dental age IVa which is completion of the permanent dentition showed the highest percentage in male and female. 4. Geographic distribution showed a majority of patients in Kwang Ju(71.0%). Group within the distance 10km from Chosun Dental Hospital was 56.3% and group within 20km was 14.7%. 5. Anterior cross bite showed the highest percentage in chief complaints and percentage of Mn. prognathism and protrusion of Mx. teeth was 12.6%, 12.2%. 6. Distribution in the types of malocclusion according to the Angle's classification had shown; 38.9% for Class I, 20.7% for Class II division 1, 2.0% for Class III division 2, 38.4% for Class III. 7. In the dental vertical dysplasia according to the Angle's classification, deep bite was the most frequent in Class II div.1 and div. 2(24.3%, 56.7%) and open bite in Class III(21.4%). 8. In the skeletal sagittal dysplasia, 39.3% of skeletal Class II was due to the undergrowth of the mandible and 46.3% of skeletal Class III was due to the overgrowth of the mandible. 9. Distribution in orthodontic treatment acceding to the extraction and nonextraction had shown 66.9% for nonextraction case, 33.1% for extraction case, and four first bicuspids have been extracted in the highest percentage(38.6%). 10. Patients who had orthognathic surgery comprised 7.9%, with an increasing trend.

  • PDF

The Oral Disease of Inpatient with the Systemic Disease (전신질환으로 입원한 환자의 구강내과 진료실태)

  • Yoo, Sang-Hoon;Jung, Sung-Hee;Auh, Q-Schick;Hong, Jung-Pyo;Chun, Yang-Hyun
    • Journal of Oral Medicine and Pain
    • /
    • v.33 no.1
    • /
    • pp.15-26
    • /
    • 2008
  • Purpose : To investigate the actual conditions of diagnosis and treatment of oral medicine inpatient with systemic disease. Methods : A total of 110 subjects, inpatient due to systemic disease for diagnosis and treatment of oral disease was requested to answer the medical history and dental treatment record. Results : Systemic disease is composed of Non-insulin-dependent diabetes mellitus 26%, Cerebral infarction 25.2%, Intracerebral hemorrhage, Polyarthrosis, Coxarthrosis 4.7%, Nerve root and plexus disorders, Hypertensive heart and renal diseases, Ankylosing spondylitis 2.4%. Chief complain of oral disease is composed of toothache 28.6%, routine check 23%, tooth mobility 8.7%, hypersensitivity 7.1%, periodontal bleeding 6.4%. Oral disease is composed of Gingivitis and periodontal diseases 28.9%, Dental caries 17.1%, Diseases of pulp and periapical tissues 15.1%, Diseases of salivary glands 10.5%, Other diseases of hard tissues of teeth 8.6%, Within Normal Limit 5.3%. Treatment of oral disease is composed of periodontal treatment 17.95%, rejection of treatment 16.67%, medication for halitosis & dry mouth 13.46%, extraction 12.18%, prosthetic treatment 8.97%. Chief complain in oral medicine is composed of oral soft tissue problem 6.4%, craniomandibular disorders 5.6%, halitosis 4%, total 16%. Conclusion : These findings indicate that inpatient due to the systemic disease is significantly correlated to the oral disease. The patients of oral disease interrelationship between inpatient and outpatient of systemic disease should be validated by future research.

A Radiologic Study of the Relationship of the Maxillary Sinus Floor and Apex of the Maxillary Molar (상악동 아래벽과 상악 대구치 치근사이 위치관계에 관한 방사선학적 연구)

  • Yoon Hae-Rym;Park Chang-Seo
    • Journal of Korean Academy of Oral and Maxillofacial Radiology
    • /
    • v.28 no.1
    • /
    • pp.111-126
    • /
    • 1998
  • In this study, radiographic evaluation was made using panoramic radiography and cross-sectional tomography of SCANORA/sup (R)/ in male and female adults in their 20's on the relationship between the maxillary sinus floor and the apex of the maxillary molar, to test the accuracy and effectiveness of the cross-sectional tomography, and to use this information in the assessment of preop. and postop. root canal treatment, apical surgery, extraction and implantology. Forty-one adults with an average age of 24.4 years were studied using panoramic radiography and cross-sectional tomography. In panoramic view and cross-sectional view, the position of the apices of maxillary molars were classified as separated, contacted, or protruded type; the general shape of the maxillary sinus floor was evaluated horizontally and vertically from cross-sectional tomography. The accuracy of each radiography was tested using maxilla from 5 fresh cadavers from the Anatomy Lab at Yonsei University Dental College, and panoramic view and cross-sectional tomography were taken in the same condition as with the patients. The results were as follows: 1. Panoramic view and cross-sectional view were taken in the maxilla specimen, and the actual distance between the maxillary sinus floor and the tooth apices were measured in the specimen; the median values of the distance from the tooth apices to the maxillary sinus floor in the panoramic view, cross-sectional view and in the actual maxilla specimen were 2.83 mm, 4.51mm, and 4.l5mm, respectively. In the cross-sectional view, the measured distance was close to the actual distance but in the panoramic view, the measured distance was far from the actual distance. 2. When the results of the panoramic view and cross-sectional view were compared, 40.5% of the results agreed with each other in the two radiographic methods and buccal roots of the 2nd molar were the closest to the maxillary sinus floor in the cross-sectional tomography. 3. In cross-sectional view, when the vertical relationship of the maxillary sinus floor and maxillary roots was assessed, in 1st molars, type II (the sinus floor that extends down to the buccolingual furcation area) was predominant, while in 2nd molars, type I (the sinus floor located above the level connecting the buccal and lingual apices) was predominant. In the horizontal relationship, in 1st molars, type II (the lowest floor of the maxillary sinus located in between the buccal and lingual roots) was predominant; in 2nd molars, type I (the lowest floor of the maxillary sinus located on the buccal side of the buccal roots) and type II appeared in similar frequency. In conclusion, the SCANORA/sup (R)/ cross-sectional tomography was more effective than the frequently used panoramic view, in that the relationship of the maxillary molars and maxillary sinus floor can be evaluated more accurately and the buccolingual cross-sectional view can also be observed. And maxillary sinus floor that was close to maxillary 2nd molar had tendency to be located on buccal side than that close to 1st molar. Therefore, cross-sectional tomography is an effective and accurate method to evaluate the position of the teeth in relation to the sinus floor preoperative and can be easily used to diagnose localized periapical lesions. Also, the image quality obtained was quite satisfactory.

  • PDF

ORTHODONTIC TRACTION OF HORIZONTALLY ERUPTED LOWER LATERAL INCISOR ON THE LINGUAL SIDE (설측으로 수평 맹출한 하악 측절치의 교정적 견인)

  • Mah, Yon-Joo;Sohn, Hyung-Kyu;Choi, Byung-Jai;Lee, Jae-Ho;Kim, Seong-Oh
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.37 no.1
    • /
    • pp.117-123
    • /
    • 2010
  • Tooth eruption is the movement of the tooth from the developing place in the alveolar bone to the functional position in the oral cavity. The permanent incisors originate from the dental lamina on the lingual side of preceding deciduous tooth and erupt to the level of the occlusion through the well developed gubernacular cord. Ectopic eruption is a developmental disturbance in the eruption pattern of the permanent dentition. Most of the ectopically erupted lower incisor has been found in lingual side. The ectopically erupted tooth could be repositioned by orthodontic force in the early mixed dentition, which could help preventing the problems of loss of space and the lingual tilting of the lower anterior teeth. An eight-year-old girl visited the department of pediatric dentistry, Yonsei Dental University Hospital, for the evaluation and the treatment of the lower right lateral incisor, which was horizontally erupted in the lingual side, parallel to the mouth floor. Her tongue was placed on the labial side of that tooth. There was no previous dental history of dental caries or trauma on the pre-occupied primary incisor. Clinical and radiographic examinations including the computed tomography(CT), showed no evidence of dilacerations on root. Therefore, we decided to start active orthodontic traction of the lower right lateral incisor. We designed the fixed type of buccal arch wire and the lip bumper with hook for the traction. Button was attached to the lingual side of the ectopically positioned tooth. Elastic was used between the appliance and the button on that tooth. After the tooth become upright over the tongue level, appliance was change to the removable type and periodic check-up with occlusal guidance was followed to monitor the position of the tooth. In this case using the fixed appliance with modified form of lip bumper and hook embedded in acrylic part instead of extraction was very efficient up-righting the ectopically erupted tooth toward the occlusal plane.

Sequential traction of a labio-palatal horizontally impacted maxillary canine with a custom three-directional force device in the space of a missing ipsilateral first premolar

  • Yang, Shuliang;Yang, Xiao;Jin, Anting;Ha, Nayong;Dai, Qinggang;Zhou, Siru;Yang, Yiling;Gong, Xinyi;Hong, Yueyang;Ding, Qinfeng;Jiang, Lingyong
    • The korean journal of orthodontics
    • /
    • v.49 no.2
    • /
    • pp.124-136
    • /
    • 2019
  • Orthodontic treatment is more complicated when both soft and hard tissues must be considered because an impacted maxillary canine has important effects on function and esthetics. Compared with extraction of impacted maxillary canines, exposure followed by orthodontic traction can improve esthetics and better protect the patient's teeth and alveolar bone. Therefore, in order to achieve desirable tooth movement with minimal unexpected complications, a precise diagnosis is indispensable to establish an effective and efficient force system. In this report, we describe the case of a 31-year-old patient who had a labio-palatal horizontally impacted maxillary left canine with a severe occlusal alveolar bone defect and a missing maxillary left first premolar. Herein, with the aid of three-dimensional imaging, sequential traction was performed with a three-directional force device that finally achieved acceptable occlusion by bringing the horizontally impacted maxillary left canine into alignment. The maxillary left canine had normal gingival contours and was surrounded by a substantial amount of regenerated alveolar bone. The 1-year follow-up stability assessment demonstrated that the esthetic and functional outcomes were successful.