• Korean Journal of Remote Sensing
• /
• v.36 no.5_1
• /
• pp.835-846
• /
• 2020

Recent severe climate changes and extreme weather events have caused the uncommon types of forest ecosystem disturbances such as hails and gypsy moths. This paper describes the analysis of the forest ecosystem disturbances using ISODATA (Iterative Self-organizing Data Analysis Technique Algorithm) with the RapidEye and Sentinel-2 images, regarding the cases of the hail damages in Hwasun in 2017 and the gypsy moth damages in the Chiak Mountain in 2020. In the case of hail damages, the comparison of the June image of this study and the July field survey of the previous study showed that the damage severity increased from June to July as the drought overlapped after the trees were injured by the hails. In the case of gypsy moths, significant leaf damages were found from the image of June, and the damages were mainly distributed at the low-altitude slope near Wonju City. We made sure that satellite remote sensing is a very effective method to detect various and unusual forest ecosystem disturbances caused by climate change. Also, it is expected that the Korean Medium Satellite for Agriculture and Forestry scheduled to launch in 2024 can be actively utilized to monitor such forest ecosystem disturbances.

• Journal of Broadcast Engineering
• /
• v.17 no.2
• /
• pp.207-222
• /
• 2012

Recently, many consumer electronics manufacturers have produced 3D devices such as 3DTVs and 3D monitors as interests in a stereoscopic video service are getting increased. However, most of 3D services are focused on local storage or bandwidth guaranteed service since 3D stereoscopic video service require bandwidth more stable and larger. This property causes difficulties in seamless stereoscopic video streaming services under IP based open network environment that cannot guarantee quality of services. In order to achieve a seamless video streaming service the international standard organization MPEG (Moving Pictures Experts Group) has developed the adaptive HTTP streaming technology called as DASH (Dynamic Adaptive Streaming over HTTP). However, the DASH doesn't have obvious scheme which can express the two elementary video streams based service-compatible stereoscopic contents in one segment. Therefore, this paper proposes a scheme of efficient 3D adaptive streaming service based on the DASH, which covers not only frame-packing stereoscopic contents but also service-compatible ones. The 3D adaptive HTTP streaming scheme introduced in this paper is able to provide 3D contents with various qualities to user and also has benefit that single 3D content can be applied to a variety of devices.

• Journal of Broadcast Engineering
• /
• v.23 no.3
• /
• pp.383-394
• /
• 2018

In this paper, we investigate image and video compression techniques based on deep learning which are actively studied recently. The deep learning based image compression technique inputs an image to be compressed in the deep neural network and extracts the latent vector recurrently or all at once and encodes it. In order to increase the image compression efficiency, the neural network is learned so that the encoded latent vector can be expressed with fewer bits while the quality of the reconstructed image is enhanced. These techniques can produce images of superior quality, especially at low bit rates compared to conventional image compression techniques. On the other hand, deep learning based video compression technology takes an approach to improve performance of the coding tools employed for existing video codecs rather than directly input and process the video to be compressed. The deep neural network technologies introduced in this paper replace the in-loop filter of the latest video codec or are used as an additional post-processing filter to improve the compression efficiency by improving the quality of the reconstructed image. Likewise, deep neural network techniques applied to intra prediction and encoding are used together with the existing intra prediction tool to improve the compression efficiency by increasing the prediction accuracy or adding a new intra coding process.

• Journal of Bio-Environment Control
• /
• v.20 no.2
• /
• pp.78-82
• /
• 2011

Ventilation rates, inside and outside weather data were measured in a arch-shape single-span plastic greenhouse growing tomatoes. On the roof of the experimental greenhouse, round windows which have a diameter of 0.6 m were installed at intervals of 8m. It showed that the number of air changes in this greenhouse were average 0.17 volumes per minute and in the range of 0.02 to 0.32 volumes per minute. These air changes are insufficient to meet the recommended ventilation rate for commercial greenhouses, and it is estimated that interval of 6 m is appropriate for spring or fall season. For summer season, it is necessary to narrow the space or to enlarge the open area of roof windows. Using the heat balance model, the evapotranspiration coefficients of greenhouse tomatoes were estimated from experimental ventilation data, overall heat transfer and solar radiation. It showed that the evapotranspiration coefficients were average 0.62 and in the 0.39 to 0.85 range. We suggest applying 0.6 as the evapotranspiration coefficient in design of ventilation for the single-span tomato greenhouses.

• Journal of Bio-Environment Control
• /
• v.23 no.3
• /
• pp.250-255
• /
• 2014

Sterilization is an important factor in reprocessing of drained nutrient solution (RDN). To evaluate the suitability of ozone microbubble for RDN in protected horticulture and plant factory, strong fungicidal activity of ozone and microbubble were applied. This experiment was taken advantage of ozonated water (OW) and ozone gas (OG). The Fusarium oxysporum (FO), Phytophthora capsici (PC) and Colletotrichum gloeosporioides (CG) were treated with OW 0.5, 1.0 and 2.0 ppm and OG $3.0g{\cdot}h^{-1}$ for 0, 30, 60, 120 and 180 sec. Results of this experiment can be summed up as follows : In the OW, FO was sterilized by 0.5 ppm in 60 sec and PC was sterilized by 2.0 ppm in 30 sec. In the OG, FO and PC both of them were sterilized in 180 sec. However, CG was not sterilized using OW and OG. Overall, ozone microbubble showed possibility of sterilization in RDN. However, CG is required to more ozone concentration and processing time.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.6 no.4
• /
• pp.137-152
• /
• 2011

The purpose of this study is to estimate efficiency of agricultural business corporations using Data Envelopment Analysis. A proposed method employs a bootstrapping approach to generate efficiency estimates through Monte Carlo simulation re-sampling process. The technical efficiency, pure technical efficiency, and scale efficiency measure of the corporations is 0.749 0.790, 0.948 respectively. Among the 692 agricultural business corporations, the number of Increasing Returns to Scale (IRS)-type corporations was analyzed to be 539(77.9%). The number of Constant Returns to Scale (CRS)-type corporations was 108(15.6%), and that of Decreasing Returns to Scale (DRS)-type corporations was 45(6.5%). Since an increase in input is lower than an increase in output in IRS, an increase in input factors such as new investments is required. The Tobit model suggests that the type of corporation, capital level, and period of operation affect the efficiency score more than others. The positive coefficient of capital level and period of operation variable indicates that efficiency score increases as capital level and period of operation increases.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.4
• /
• pp.685-694
• /
• 2016

Visibility of lane marking is impaired at night, or in case of rain, and thereby threatens traffic safety. Recently, various studies and technology have been developed to improve lane marking visibility, such as the extension of lane marking life expectancy (up to 1.5 times), improvement of lane marking equipment, improvement of lane marking visibility (32.7%) by applying phosphorescent material mixed paint, and expressway lane design standards alternative (length 6m, gap 12m, width 13cm: 27.8% of painted surface are reduced) adoption with ergonomic analysis. In this study, a set of cost-benefit analyses was performed for the cases where such techniques were applied. Based on the literature review, 26.9% of traffic accidents would be prevented by improving lane marking visibility by 32.7%; accident reduction benefit was calculated as much as 12.5 billion KRW. Meanwhile, total increased cost when introducing phosphorescent material mixed paint and lane design standards alternative is calculated as 30.6 billion KRW. However, economic feasibility could not be secured with 0.41 of cost-benefit ratio when applied to the expressway network as a whole. Additionally, cost-benefit (B/C) analysis was applied to each of the top 20 night accident hot spots and the results of B/C ratios were between 0.67 and 4.20, showing that 11 out of 20 spot sections of expressway can have economic feasibility. This results indicate, with this kind of pavement marking applied to accident hot spots in rural expressway, better visibility and economic feasibility can be guaranteed through traffic accident reduction. Some limitations and future research agenda have also been discussed.

• Journal of the Korean Institute of Gas
• /
• v.24 no.5
• /
• pp.56-64
• /
• 2020

This study presents the hydrate induction time of PVCap according to subcooling temperature, salt concentration, and MEG concentration in order to analyze the inhibition effect of PVCap in various production environments of offshore gas fields. A high-pressure hydrate generator was made for the hydrate formation experiments. It was verified that the apparatus had sufficient reliability by comparing the results of hydrate equilibrium conditions and induction time from the apparatus with published reference data. As the subcooling temperature increased from 6.1℃ to 12.1℃, the induction time of PVCap concentration of 0.1~1 wt% decreased. When the salt concentration increased from 3 wt% to 7 wt%, the induction time was reduced by up to 78% under the condition of 0.5 wt% PVCap due to polymer structure degradation by salt effect. In the case of HHI (hybrid hydrate inhibitor) made by mixing MEG 10 wt% and PVCap, the change in induction time was not large compared to PVCap 1 wt% due to the under-inhibition effect. On the other hand, the hydrate inhibition efficiency of HHI with MEG 20wt% increased 1.7 times compared to PVCap.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.6
• /
• pp.2545-2552
• /
• 2018

$SF_6$ has been widely used in high voltage power equipment, such as gas insulated switchgear (GIS) and gas insulated transmission line (GIL), because of its excellent insulation and arc extinguishing performance. However, $SF_6$ faces two environmental problems: greenhouse effect and high liquefaction temperature. Therefore, to find the $SF_6$ substitute gases has become a research hotspot in recent years. In this paper, the liquefaction characteristics of $SF_6$ substitute gases were studied. Peng-Robinson equation of state with the van der Waals mixing rule (PR-vdW model) was used to calculate the dew point temperature of the binary gas mixtures, with $SF_6$, $C_3F_8$, $c-C_4F_8$, $CF_3I$ or $C_4F_7N$ as the insulating gas and $N_2$ or $CO_2$ as the buffer gas. The sequence of the dew point temperatures of the binary gas mixtures under the same pressure and composition ratio was obtained. $SF_6/N_2$ < $SF_6/CO_2$ < $C_3F_8/N_2$ < $C_3F_8/CO_2$ < $CF_3I/N_2$ < $CF_3I/CO_2$ < $c-C_4F_8/N_2$ < $C_4F_7N/N_2$ < $c-C_4F_8/CO_2$ < $C_4F_7N/CO_2$. $SF_6/N_2$ gas mixture showed the best temperature adaptability and $C_4F_7N/CO_2$ gas mixture showed the worst temperature adaptability. Furthermore, the dew point temperatures of the $SF_6$ substitute gases at different pressures and the upper limits of the insulating gas mole fraction at $-30^{\circ}C$, $-20^{\circ}C$ and $-10^{\circ}C$ were obtained. The results would supply sufficient data support for GIS/GIL operators and researchers.

• Progress in Medical Physics
• /
• v.14 no.3
• /
• pp.161-166
• /
• 2003

To evaluate the performance of cadmium sulfide as a multi-function X-ray dosimeter, we made an X-ray detector that was based on cadmium sulfide using evaporation technology, and measured its response to X-ray exposure. The voltages of cadmium sulfide were measured on the various X-ray tube potentials, X-ray tube currents and exposure times. The regression analysis of the voltage response of CdS on the tube-potential variation was y=0.0995x-0.1146 ($R^2$=0.9595, $\sigma$=0.08, standard error=2%) and the regression analysis of the voltage response of CdS on the tube-potential variation was y=0.0439x+1.1891 ($R^2$=0.9021, $\sigma$=0.04, standard error=1.8%) The regression analysis of the voltage response of CdS on the X-ray exposure time variation was y=8.2853+5.5878 ($R^2$=0.7287, $\sigma$=0.06, standard error=1.9%). In conclusion, cadmium sulfide responded linearly to the variation X-ray conditions, suggesting cadmium sulfide to be a feasible X-ray sensor of multi-function dosimeter related instruments.