• 한국물환경학회지
• /
• 제28권4호
• /
• pp.608-614
• /
• 2012

The effluent limitation of industrial wastewater is based on uniform regulatory criteria for effluent discharge facilities of all in Korea. But, an individual effluent limitation on each effluent discharge facility is widely applicable for regulation of industrial wastewater in US.EPA. To decide an individual effluent limitation, TBEL (Technology-based effluent limitation) and WQBEL (Water quality-based effluent limitation) are used. TBEL is based on the capability of a treatment technology to reduce the pollutants. WQBEL is based on ambient water quality standards. In this study, TBEL were derived for the pulp, paper and paper board manufacturing based on best practicable control technology currently available. It was suggested that effluent limitations were $BOD_5$ 4.7 mg/L, $COD_{Mn}$ 44.3 mg/L, SS 13.2 mg/L, TN 1.4 mg/L, TP 0.15 mg/L and best practicable control technology currently available (BPT) was neutralization, activated sludge treatment and coagulation and sedimentation for the pulp, paper and paper board manufacturing.

• 한국물환경학회지
• /
• 제26권4호
• /
• pp.557-565
• /
• 2010

Recently, regulations on toxic compounds in aquatic environment have been strengthened in korea due to the increasing public awareness of the water quality. Typically, these regulations include introduction of emerging toxic compounds and stricter effluent limitations for the already regulated compounds. However, too strict regulations may cause excessive burden on the industry. Therefore it is also important to assess the economic impacts when the new effluent limitation guidelines are introduced. The estimation of the additional cost for the wastewater dischargers to meet the new guidelines are based on the selected treatment technology to handle the hazardous substances and the regulatory levels for effluent limitations. To explore the procedures for cost estimation in enforcing new effluent limitations, a case study was performed specially for 1,4-dichlorobenzene. The pollutants of concern are surveyed for different industrial categories and various treatment technologies. For a given pollutant, the general performances of the treatment technologies are surveyed and a representative technology is selected. For a given technology, the capital cost and annual Operation and Maintenance (O&M) cost was calculated. The calculation of baseline costs to operate ordinary treatment technologies is also important. The ratio between the cost for introducing new treatment process and the baseline cost required for conventional technology was used to evaluate the economic impact on the industry. For 1,4-dichlorobenzene, steam stripping and activated carbon processes were selected as the specific treatment technologies. The cost effects to the regulation of the compound were found to be 6.4% and 14.5% increase in capital cost and O&M cost, respectively, at the flow rate over $2,000m^3/d$ for the categories of synthetic resin and other plastics manufacturing industry. For the case of petrochemical basic compounds manufacturing industry, the cost increases were 5.8% and 12.4%, respectively. It was suggested that cost effect analysis to evaluate the economic impacts of new effluent limitations on the industry is crucial to establish more balanced and reasonable effluent limitations to manage the industrial wastewater containing emerging toxic compounds in the wastewater.

• 생태와환경
• /
• 제38권3호통권113호
• /
• pp.281-288
• /
• 2005

폐수배출시설별 BAT 평가제도는 폐수특성을 고려한 배출시설별 배출허용기준 설정, 오염총량관리기본계획 및 시행계획에 따른 오염부하삭감 가능량 산정, 신규오염물질에 대한 배출허용기준 산정 등 효율적인 산업폐수관리를 위해서 도입할 필요가 있다. 본 연구에서는 외국사례와 국내 폐수배출시설들의 현황 등을 조사하여 국내여건에 적합한 BAT 평가방안을 제시하였다. 본 평가절차의 핵심은 폐수배출시설별 처리시설에 대한 환경인자, 경제적 수용가능성, 기술적 인자 및 경제성 등을 객관성 있고 전문적인 판단이 가능토록 한데 있다. 본 BAT 평가방안은 처리수준에 근거한 폐수배출시설별 배출허용기준마련 및 오염총량관리를 위한 기초 자료로 활용할 수 있으며, 신규오염물질 및 유해오염물질의 배출허용기준 마련 등 정책적${\cdot}$법적 제도개선에 유용하게 활용할 수 있을 것으로 사료된다.

• 해양환경안전학회지
• /
• 제29권2호
• /
• pp.106-117
• /
• 2023

해양산업시설의 위험유해물질 배출이 미치는 사회영향을 평가하고, 기술근거배출허용기준 설정과정에서 요구되는 사회영향평가 항목 및 방법적용에 대한 시사점을 도출하였다. 연구범위는 인천광역시에 있는 해양산업시설을 대상으로 하였다. 분석결과는 다음과 같다. 첫째, 기업 및 산업에 대한 영향은 '큰' 것으로 평가되었지만, 대기업은 영업이익손실과 도산가능성, 그리고 고용손실의 영향이 적었고, 소기업과 중기업은 영향이 큰 것으로 나타났다. 둘째, 지역사회 및 경제에 대한 영향은 '적은' 것으로 평가되었으나, 직접적으로 인과관계를 지니는 어업생산자나 지역관광종사자, 그리고 해당 지역은 그 영향이 집중되어 크게 나타날 수 있기 때문에 이에 대한 세심한 정책적 개입이 필요한 것으로 판단된다. 셋째, 기술근거배출허용기준의 설정방법에서 사회적 손실비용 및 사회적 편익산정 항목과 방법이 유용하게 적용될 수 있는 것으로 판단된다.

• 한국물환경학회지
• /
• 제26권1호
• /
• pp.1-9
• /
• 2010

Technology-Based Effluent Limitations (TBELs) is a permit limits for a pollutant that is based on the capability of a treatment technology to reduce the pollutant to a certain concentration. Widely practiced for regulations of industrial wastewater in US, TBELs has been accepted as an effective means that can achieve balanced goals between complete elimination of pollutants discharge and economic feasibility for industries. The review of TBELs application in US and the applicability of TBELs to the domestic industry categories was given in three papers. In the first paper, the development and practices of TBELs in US were reviewed including case studies. The developments of TBELs in US in the four major categories, the metal products & machinery, the petroleum refining, the porcelain enameling and the meat & poultry products were reviewed. The applicability of TBELs to the domestic industrial categories was also assessed. In the second paper, the pollution loads analysis for domestic industrial wastewater was conducted based on risk assessment indicator using Toxic Weighting Factors (TWFs). This is an essential part to determine the priority of TBELs application for the domestic industrial categories. In the last paper, the application of TBELs to the domestic industries was demonstrated through a case-study for the pulp/paper/paperboard category. Direct application of TBELs of US into the Korean regulation system may not be desirable because the specific goals and the environment for the regulations for the two countries may not be identical. For example, unlike US, Korea does not adopt the individual permit system for pollution sources. However, among the unproductive and exhaustive controversies over the uniform regulations regardless of the industrial categories in Korea, the introduction of the principles of TBELs are inevitable and more extensive study for applications of TBELs optimized for Korean regulation system will be necessary.

• 환경위생공학
• /
• 제22권4호
• /
• pp.1-9
• /
• 2007

A wastewater treatment plant, operating process is physico-chemical/biological activated sludge attached sand filtration, was selected to evaluate effluent quality and pollutants removal efficiencies consideration for deriving the technology-based effluent limitation for petroleum refining industry discharge. The results of influent and effluent analysis were as follows: Average effluent quality were 0.076mg/l of copper, 0.084mg/l of lead, 0.036mg/l of zinc, 0.005mg/l of nickel and 0.004mg/l of cadmium, and the range of coefficient of reliability from 0.007 of copper to 1.0 of lead. Also, 95% of reliability, 0.112, 0.15, 0.063, 0.015 and 0.009mg/l, respectively, were remarkably lower than their effluent limitations. And to reach 95% reliability of effluent limitation at cleanness area, designed effluent quality of copper, lead, zinc and cadmium should be 0.268, 0.099, 0.526 and 0.008mg/l, respectively.

• 한국물환경학회지
• /
• 제22권1호
• /
• pp.59-65
• /
• 2006

The effluent limitations for individual industry based on the best available technology economically achievable (BAT) have been required to achieve effective regulation. BAT assessment criteria that are suitable for the circumstances of Korean industry were developed in the previous study. The criteria were applied to determine the BAT for petrochemical basic compound manufacturing (PBCM) and plastics and synthetic resins manufacturing (PSRM) industry. Wastewater discharged from the each category contains high concentration of COD and toluene. Eighteen sites were surveyed and wastewater qualities were analyzed. Six and two different technologies were applied to the PBCM and PSRM industry for the end-of-pipe treatment process, respectively. The technology candidates were evaluated in terms of environmental impacts, economically achievability, treatment performance and economical reasonability. As the result, the technology options: typical activated-sludge process + sand filtration + activated carbon adsorption (PBCM) and wet oxidation + chemical precipitation + typical activated-sludge process + chemical precipitation (PSRM) were selected as the BAT for each industry.

• 해양환경안전학회지
• /
• 제28권spc호
• /
• pp.44-49
• /
• 2022

해양환경의 위험유해물질 배출규제는 주로 선박이나 해양시설 등으로부터의 오염규제에 한정되어 있기 때문에, 해안 인접 산업시설들의 위험유해물질 배출 허용기준 및 배출 지침 수립 등의 해양배출제도의 수립 필요성이 제기되고 있다. 본 연구에서는 해양산업시설의 위험유해물질 배출 허용기준 및 배출 지침 정보를 자세히 제공하고 있는 미국 환경보호청(US EPA)의 자료를 중심으로 허용기준 및 배출 지침 수립 등 배출 제도 체계를 소개하고 향후 국내 배출지침 적용에 대해 고찰했다.

• 한국물환경학회지
• /
• 제26권2호
• /
• pp.191-199
• /
• 2010

Introduction of Technology-Based Effluent Limitations (TBELs) concepts into Korea requires extensive and through analyses on the expected pollutants reduction effects and the cost factor for the industry side. In addition, the TEBLs should be optimized for the regulatory environments of Korea and be applied in a progressive manner to minimize the undesirable effects. It is also necessary to assess the contribution of each industrial categories's to the pollution of natural water bodies to find the priority of TEBLs application. For these purposes, the pollution loads of various industrial categories were analyzed using risk assessment indicator based on Toxic Weighting Factors (TWFs). First, the TWFs were calculated for the pollutants regulated using the method adopted by USEPA. And the effluent characteristics of the eighty two categories of industry in Korea were investigated. Although the analytical data on the wastewater from different industrial categories are relatively limited, the results from two previous studies were used. The first study, conducted by the National Institute of Environmental Research in 2001~2004, investigated the wastewater characteristics from 255 industrial sources covering the major 20 industrial categories. The second study includes more recent analytical data for the wastewater from 500 industrial sources, covering all the 82 industrial categories. In the result of the pollution loads analyses, the category of 'Synthetic and Chemical manufacture' was found to show the highest raw pollution load. On the other hand the category of 'Ion & Steel manufacture' was found to show the highest effluent pollution loads, which can be considered as the real impacts on natural water streams. The top five categories occupied 62.2% of the total effluent pollution loads. Through the analyses, the relative importances of each industrial categories and the priorities of TEBL-based pollution reduction were determined.

• 한국물환경학회지
• /
• 제22권1호
• /
• pp.51-58
• /
• 2006

The effluent limitations for individual industry based on the best available technology economically achievable (BAT) have been required to achieve effective regulation. BAT assessment criteria that are suitable for the circumstances of Korean industry were developed in the previous study. The criteria were applied to determine the BAT for leather tanning and finishing industry. For the evaluation BAT, a subcategorization for the industry considering wastewater characteristics, source equipments, raw material and so on should be suggested. Three subcategories: A) Unharing, Chrome Tan, Retan-Wet Finish, B) Chrome Tan, Retan-Wet Finish, and C) Furskins were proposed in this study. Wastewater discharged from the each category contains high concentration of COD, chrome, nitrogen and sulfide. In particular, the concentration of nitrogen from the subcategory A is significantly greater. Twenty sites were surveyed and wastewater qualities were analyzed. Therefore, six different technologies were applied to the subcategory A for the end-of-pipe treatment technology, and a technology was used in the subcategory B and C, respectively. The technology candidates were evaluated in terms of environmental impacts, economically achievability, treatment performance and economical reasonability. As the result, the technology options for each subcategories: A) primary chemical precipitation + modified Ludzack-Ettinger process (MLE) + secondary chemical precipitation, B) chemical precipitation + typical activated-sludge process + Fenton oxidation, C) chemical precipitation + typical activated-sludge process + batch Fenton oxidation or batch activated carbon treatment were selected as the BAT, respectively.