• Korean Journal of Computational Design and Engineering
• /
• v.5 no.1
• /
• pp.23-32
• /
• 2000

In this paper, we present a Web-enabled product data sharing system for the support of RPD (Rapid Product Development) process by incorporating STEP (STandard for the Exchange of Product model data) with Web technology such as VRML (Virtual Reality Markup Language), SGML (Structured Generalized Markup Language) and Java. Extreme competition makes product life cycle short by incessantly deprecating current products with a brand-new one, and thus urges enterprises to devise a new product faster than ever. In this environment, an RPD process with effective product data sharing system is essential to outstrip competitors by speeding up the development process. However, the diversity of product data schema and heterogeneous systems make it difficult to exchange the product data. We chose STEP as a neutral product data schema and Web as an independent exchange environment to overcome these problems. While implementing our system, we focused on the support of STEP AP 203 UoF (Units of Functionality) views to efficiently employ STEP data models that are maximally normalized, and therefore very cumbersome to handle. Our functionality-oriented UoF view approach can increase users'appreciation since it facilitates the modular usage of STEP data models. This can also enhance the accuracy of product data. We demonstrate that our view approach is applicable to the configuration control of mechanical assemblies.

• Journal of the Korean Chemical Society
• /
• v.56 no.4
• /
• pp.424-430
• /
• 2012

Densities, viscosities, refractive indices and speed of sounds of the binary mixtures of Acetophenone with Ethylchloroacetate were measured over the entire mole fractions at (303.15, 313.15 and 323.15) K. From these experimental results, excess molar volume $V^E$, viscosity deviation ${\Delta}{\eta}$, refractive index deviation ${\Delta}n_D$, deviations in speed of sound ${\Delta}u$, deviations in isentropic compressibility ${\Delta}k_s$ and excess intermolecular free length ${\Delta}L_f$ were calculated. The viscosity data have been correlated with the equations of Grunberg and Nissan, Hind et al., Tamura and Kurata, Katti and Chaudri, Sedgwick, Krishnan-Laddha and McAllister. The thermo physical properties under study were fit to the Jouyban-Acree model. The excess values were correlated using Redlich-Kister polynomial equation to obtain their coefficients and standard deviations. It was found that in all cases, the data obtained fitted with the values correlated by the corresponding models very well. The results are interpreted in terms of molecular interactions occurring in the solution.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.2 s.34
• /
• pp.11-19
• /
• 2005

The importance of this Paper is to develop a standard Performance evaluation model and scenario for the secure OS. According to the scenario that was conducted for Performance evaluation, benchmarking was Performed. All the benchmarking result was thoroughly analyzed. Our result contribute to evaluating Secure 05 that contains various security policy affecting system Performance. In this paper, it is expected to Provide guidelines of secure operating system for the consumer, developer and evaluator. It will also contribute to the systematic basis for evaluation of security 05 and the promotion of domestic information security industry by retaining basic technology for international trends.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.4
• /
• pp.639-646
• /
• 2010

The APAM's quantitative effectiveness and comparative study in preventing and treating pressure ulcer has not been sufficiently evaluated mainly because of uncertainty of pressure load input and lack of interpretation of dynamic perfusion recovery characteristics of soft tissue. The purpose of this paper was to quantify and analyze the alternating pressure characteristics of APAM as a preventive measure for pressure ulcers. To quantify the alternating load to human body, we introduced alternating pressure profile concept and developed parametric model of the profile. Regarding pressure level and cycle time, 3 global and 7 local periodic parameters were used to define the profile such as light, standard, typical and heavy duty profile shape. Pressure impulse ratio of light duty is the lowest but pressure fluctuation is significantly high. For the same duty shape, contact conditions are changed with alternating cycle time and more dramatically in shorter alternating cycle time conditions. We can conclude that if we use shorter alternating cycle time on APAM's operation we can get more positive effects regarding to inflated contact time condition. We proposed the quantitative methods on tissue viability study of external loading by simultaneous measurement of interface pressure and tissue perfusion with proper alternating pressure profile conditions.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.4
• /
• pp.83-89
• /
• 2013

A numerical scheme based on a mode superposition method is presented for the dynamic response analysis of a top-tensioned riser (TTR) under sheared current loads. The natural frequencies and mode shapes of the TTR have been calculated analytically for a beam with a slowly varying tension and pinned-pinned boundary conditions at the top and bottom ends. The lift coefficients and corresponding amplitudes used to estimate the vortex-induced modal force and damping for each mode were predicted via iterative calculations based on the input and output power balancing concept. Here, the power-in regions were controlled by the normal distribution function, for which the center was coincident with the lock -in location by local vortex-shedding, and the range was defined by the constant standard deviation for the reduced velocity by the local current speed. Finally, dynamic responses such as root-mean-squared displacement and stress were calculated using the mode superposition technique. In order to verify the presented scheme, a numerical calculation was performed for a TTR under an arbitrary linearly sheared current and linearly varying tension. A comparison with the results of the existing software showed that the presented scheme could give reliable and feasible solutions. Case studies were performed to investigate the effects of various current loads and tensions.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.629-634
• /
• 2000

Generally, the accuracy of motion control systems is strongly influenced by both the mechanical characteristics and servo characteristics of feed drive systems. In the fed drive systems of machine tools that consist of mechanical parts and electrical parts, a torsional vibration is often generated because of its elastic elements in torque transmission. Especially, a torsional vibration caused by the elasticity of mechanical elements might deteriorate the quick movement of system and lead to shorten the life time of the mechanical transmission elements. So it is necessary to analyze the electromechanical system mathematically to optimize the dynamic characteristics of the feed drive system. In this paper, based on the simplifies feed drive system model, radius errors due to position gain mismatch and servo response characteristic have been developed and an optimal criterion for tuning the gain of speed controller is discussed. The proportional and integral parameter gain of the feed drive controller are optimal design variables for the gain tuning of PI speed controller. Through the optimization problem formulation, both proportional and integral parameter are optimally tuned so as to compensate the radius errors by using the genetic algorithm. As a result, higher performance on circular profile tests has been achieved than the one with standard parameters.

• Journal of Advanced Navigation Technology
• /
• v.16 no.2
• /
• pp.255-263
• /
• 2012

In this paper, the performance evaluation results of the timing synchronization schemes are presented for aeronautical mobile airport communication systems (AeroMACS). AeroMACS, which is based on IEEE 802.16e mobile WiMAX standard, uses the aeronautical frequency band of 5GHz with the bandwidth of 5MHz. The simulation model of AeroMACS is constructed and the evaluation for the timing synchronization performance is performed with the various channel models such as apron (APR), runway (RWY), taxiway (TWY), and park (PRK).

• The Journal of Society for e-Business Studies
• /
• v.12 no.3
• /
• pp.97-106
• /
• 2007

A core technology that may realize the Semantic Web is Ontology. The OWL (Web Ontology Language) has been positioned as a standard language. It requires technical expertise to directly represent the domain knowledge in OWL. Based on our experience of analyzing the fundamental relationships of concepts in e-catalog domain, we have developed a visual product information modeler called PROMOD. The modeling editor makes it possible to automatically generate the OWL codes for the given product information. We employ an Extended Entity-Relationship for conceptual modeling, enriched with modeling elements specialized for the product domain. In this paper, we present our translation schemes from EER model to OWL codes, and how to design and implement the modeling editor. We also provide a scenario to demonstrate the usage of the editor in practice.

• Journal of Advanced Navigation Technology
• /
• v.16 no.1
• /
• pp.103-108
• /
• 2012

The basic service model is to be process transmting patient health information from various medical devices to evacuation hospital through gateway collecting it in aerial emergency medicine environments. In this paper, we study on the most secure transmission scheme in case that personal patient informations are transmitted from medical devices to gateway. Moreover we compare and analyze existing methods on secure transmission and suggest an optimal alternative on the basis of international standard, ISO/IEEE 11073.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.1
• /
• pp.307-312
• /
• 2014

We present a full finite element analysis for plasma discharge in etching process of semiconductor circuit. The charge transport equations of hydrodynamic diffusion-drift model and the electric field equation were numerically solved in a fully coupled system by using a standard finite element procedure for transient analysis. The proposed method was applied to a real plasma reactor in order to characterize the plasma sheath that is closely related to the yield of the etching process. Throughout the plasma discharge analysis, the base electrode of reactor was tested and modified for improving the uniformity around the wafer edge. The experiment and numerical results were examined along with SEM data of etching quality. The feasibility and usefulness of the proposed method was shown by both numerical and experimental results.