• Title/Summary/Keyword: Technology alternative

Search Result 4,069, Processing Time 0.027 seconds

A Study on Cost-benefit analysis of Defense Improvement Project for Acquisition Alternative Analysis (방위력개선사업의 비용편익 분석을 통한 획득대안 분석 연구)

  • Kim, Byung-Chan;An, Dan
    • Journal of Convergence for Information Technology
    • /
    • v.11 no.6
    • /
    • pp.113-119
    • /
    • 2021
  • Since the weapon system project has a large ripple effect on the country by investing a huge budget, analysis of acquisition methods that secured economic feasibility is required in the planning stage to promote the weapon acquisition project. In response to this demand, economic analysis for acquisition method is preformed in the research stage of previous studies, but the analysis on economic analysis for acquisition alternative is imperfect at the present. In this research, we identify the limitations of the effect analysis and propose an additional cost-benefit analysis method to analyze the economic feasibility of the acquisition alternative. It is possible to present the universal results of economic feasibility analysis for not only multiple alternatives but also single alternatives by presenting benefit/cost ratio. It is applied to research on acquisition project of OO guided rocket, and the result of economic analysis for each alternative is presented.

Comparison of Physical Properties of CFC Alternative Cleaning Solvents (CFC 대체세정제의 물성 비교)

  • Row, Kyung Ho;Lee, Youn Yong
    • Analytical Science and Technology
    • /
    • v.6 no.1
    • /
    • pp.65-75
    • /
    • 1993
  • A number of alternative cleaning solvents to CFC 113 which was identified as a ozone-depleting meterial were collected to measure their experimental physecal properties of density, surface tension, Refractive Index, boiling point, pH, viscosity, flash point, and soltbility. They might be classified as aqueous, simi-aqeous, alcohol ketone, and halogen cleaning solvents. The solubilities of abietic acid, a major component of flux used in PCB (Printed Circuit Board) of the electronic indystry, into the cleaning solvents including CFC 113 were determined for comparison. The assorted cleaning solvents have their own advantages and disadvantages. Therefore a end-user carefully needs to choose the best-fit cleaning solvent after the safety, stability, and economics as well as the effectiveness by physical properties of the alternative cleaning solvents are integratedly considered.

  • PDF

전원개발 및 우선구매를 통한 대체발전 보급확대 방안

  • 이창호;박종진;이재훈
    • Proceedings of the Korea Technology Innovation Society Conference
    • /
    • 2001.05a
    • /
    • pp.509-530
    • /
    • 2001
  • For the greenhouse 9as emissions' reduction of fossil fuel, the energy policy on the promotion of alternative energy should be implemented. Accordingly, national policies on the development and promotion of alternative energy were made, and related laws and regulations are being made, and comprehensive plans should be followed. The policies and strategies for promoting the renewable energy have been insufficient in comparison with those of the developed countries. This paper suggests the spread extension plan of renewable generation through generation development and priority purchase.

  • PDF

An Alternative X-ray Diffraction Analysis for Comprehensive Determination of Structural Properties in Compositionally Graded Strained AlGaN Epilayers

  • Das, Palash;Jana, Sanjay Kumar;Halder, Nripendra N.;Mallik, S.;Mahato, S.S.;Panda, A.K.;Chow, Peter P.;Biswas, Dhrubes
    • Electronic Materials Letters
    • /
    • v.14 no.6
    • /
    • pp.784-792
    • /
    • 2018
  • In this letter, a standard deviation based optimization technique has been applied on High Resolution X-ray Diffraction symmetric and asymmetric scan results to accurately determine the Aluminum molar fraction and lattice relaxation of Molecular Beam Epitaxy grown compositionally graded Aluminum Gallium Nitride (AlGaN)/Aluminum Nitride/Gallium Nitride (GaN) heterostructures. Mathews-Blakeslee critical thickness model has been applied in an alternative way to determine the partially relaxed AlGaN epilayer thicknesses. The coupling coefficient determination has been presented in a different perspective involving sample tilt method by off set between the asymmetric planes of GaN and AlGaN. Sample tilt is further increased to determine mosaic tilt ranging between $0.01^{\circ}$ and $0.1^{\circ}$.

Human Visual Intelligence and the New Territory of Educational Technology Research

  • RHA, Ilju
    • Educational Technology International
    • /
    • v.8 no.1
    • /
    • pp.1-16
    • /
    • 2007
  • The general aim of this article is to explicate what can be researched in our field based on the new understanding on the ability of human visual intelligence. To follow this aim, three key discussions were followed. The first is to explain why the human visual intelligence research is so important in our field and how it was neglected. The basic orientations of the research questions used in its framing and in answering are reviewed. After reviewing traditional research orientations, as the second discussion, alternative, more useful perspective for thinking about human visual intelligence is suggested. And the possibility of contribution for the future research in general is discussed. In doing so, human visual intelligence was defined in rather practically oriented ways rather than theoretically oriented ones. More practical perspectives were suggested. The third discussion is to show how to use the alternative perspectives of human visual intelligence in the areas of educational technology research. It was hoped that the article lays out conceptual groundwork for generation of educational technology research frameworks which can be used for the research conduct, reproduction and sharing by adopting practically oriented views on human visual intelligence as a new territory of educational technology research.

Application of the Clean Technology in the Metal Cleaning Process (금속세정공정의 청정기술 적용사례)

  • Chung, Chan-Kyo;Koo, Hee-Jun
    • Clean Technology
    • /
    • v.3 no.2
    • /
    • pp.57-73
    • /
    • 1997
  • Metal cleaning process is a technology which removes oil, dust and soil etc. on the surface of metal utilizing cleaning agents. These contaminants disturb the following processes such as plating and painting etc. if they are not removed. Thus, metal cleaning is typically an environmentally hazardous activity. Until recently, vapor degreasers as utilizing chlorinated solvents have been relatively cheap, extraordinarily versatile and waste disposal costs have been perceived as insignificant. Today, however, it is readily apparent that Industry's reliance upon chlorinated solvents as metal cleaners have resulted in a myriad of environmental, health and safety concerns. Therefore, this paper studies on a parameter and a sort of the alternative cleaning agents for the optimum cleaners. Also, a great deal of effort has been devoted to developing alternative metal cleaning technologies in advanced countries and some processes are being commercialized among them. We are going to consider alternative aqueous cleaning agents replacing organic chlorinated solvents and to pursue a domain application through a successful improvement case.

  • PDF

Lubricity Characterization of Hydrogenated Biodiesel as an Alternative Diesel Fuel (경유 대체연료로서 수첨바이오디젤의 윤활 특성 연구)

  • Kim, Jae-Kon;Jeon, Cheol-Hwan;Yim, Eui-Soon;Chung, Choong-Sub
    • Tribology and Lubricants
    • /
    • v.28 no.6
    • /
    • pp.321-327
    • /
    • 2012
  • Paraffin bio-based hydrotreated biodiesel(HBD) is originated from vegetable oil(the process can also be applied to animal fat) with the the chemical structure $C_nH_{2n+2}$. In the number of process of the oil or fat, the hydrogenation is significantly important to create a bio-based diesel fuel. This study is focused on lubricity characteristics of BTL diesel blends to use alternative diesel fuel in Korea. The BTL diesel are blended the different volume ratios (HBD 5(5 vol.% HBD - 95 vol.% diesel), HBD 10, HBD 20, HBD 30, HBD 40 and HBD 50. HBD with paraffin compounds showed a very high centane number, low sulfur content and free aromatic compound. Especially, the wear scar of HBD showed poor lubricity compared to automotive diesel due to the fuel composition, low sulfur content and free aromatic compound. Also, the lubricity specification of automotive diesel with different six HBD blends is within the limit by the Korean standards. Finally, HBD as an alternative diesel fuel is challengeable in transportation sector of Korea.

A Study on Feasibility Analysis and Alternatives for Infrared Detector Development (적외선 검출기 개발가능성 및 대안 분석 연구)

  • Kim, Gyeong-Su;Min, Seong-Gi;Kim, Cheol-Hwan
    • 시스템엔지니어링워크숍
    • /
    • s.4
    • /
    • pp.123-134
    • /
    • 2004
  • This paper deals with the feasibility analysis and alternatives for infrared detector development. The purpose of this paper analyze development requirement and feasibility study in both technology and cost. We get raw input data for system engineering process from development and technical expert, and then analyze cost and technology for development feasibility, and alternative study. Infrared Detector is core component of Thermal Imaging System and developed by ADD from 2006 to 2008 year. Technical level is analyzed by TRL(Technical Readiness Level) and AOA(Analysis of Alternative) is done by development and production cost estimate. We use SEER-H tool for cost estimate, that is parametric cost estimate tool based on Knowledge Base. Also this paper presents risk analysis for project management because it is necessary to risk driver management during the infrared detector development. The result of IR Detector feasibility and alternative study will be used in technical and cost analysis. This study can help those who are related to the cost analysis and development feasibility of other weapons

  • PDF

HYDROGEN USE IN INTERNAL COMBUSTION ENGINE: A REVIEW

  • Kumar, Vasu;Gupta, Dhruv;Kumar, Naveen
    • International Journal of Advanced Culture Technology
    • /
    • v.3 no.2
    • /
    • pp.87-99
    • /
    • 2015
  • Fast depletion of fossil fuels is urgently demanding a carry out work for research to find out the viable alternative fuels for meeting sustainable energy demand with minimum environmental impact. In the future, our energy systems will need to be renewable and sustainable, efficient and cost-effective, convenient and safe. Hydrogen is expected to be one of the most important fuels in the near future to meet the stringent emission norms. The use of the hydrogen as fuel in the internal combustion engine represents an alternative use to replace the hydrocarbons fuels, which produce polluting gases such as carbon monoxide (CO), hydro carbon (HC) during combustion. In this paper contemporary research on the hydrogen-fuelled internal combustion engine can be given. First hydrogen-engine fundamentals were described by examining the engine-specific properties of hydrogen and then existing literature were surveyed.

A Part-Machine Grouping Algorithm Considering Alternative Part Routings and Operation Sequences (대체가공경로와 가공순서를 고려한 부품-기계 군집 알고리듬)

  • Baek, Jun-Geol;Baek, Jong-Kwan;Kim, Chang Ouk
    • Journal of Korean Institute of Industrial Engineers
    • /
    • v.29 no.3
    • /
    • pp.213-221
    • /
    • 2003
  • In this paper, we consider a multi-objective part-machine grouping problem, in which part types have several alternative part routings and each part routing has a machining sequence. This problem is characterized as optimally determining part type sets and its corresponding machine cells such that the sum of inter-cell part movements and the sum of machine workload imbalances are simultaneously minimized. Due to the complexity of the problem, a two-stage heuristic algorithm is proposed, and experiments are shown to verify the effectiveness of the algorithm.