The purpose of this study was compare to the patient setup deviation of two different type thermoplastic immobilization masks for glottis cancer in the intensity-modulated radiation therapy (IMRT). A total of 16 glottis cancer cases were divided into two groups based on applied mask type: standard or alternative group. The mean error (M), three-dimensional setup displacement error (3D-error), systematic error (${\Sigma}$), random error (${\sigma}$) were calculated for each group, and also analyzed setup margin (mm). The 3D-errors were $5.2{\pm}1.3mm$ and $5.9{\pm}0.7mm$ for the standard and alternative groups, respectively; the alternative group was 13.6% higher than the standard group. The systematic errors in the roll angle and the x, y, z directions were $0.8^{\circ}$, 1.7 mm, 1.0 mm, and 1.5 mm in the alternative group and $0.8^{\circ}$, 1.1 mm, 1.8 mm, and 2.0 mm in the alternative group. The random errors in the x, y, z directions were 10.9%, 1.7%, and 23.1% lower in the alternative group than in the standard group. However, absolute rotational angle (i.e., roll) in the alternative group was 12.4% higher than in the standard group. For calculated setup margin, the alternative group in x direction was 31.8% lower than in standard group. In contrast, the y and z direction were 52.6% and 21.6% higher than in the standard group. Although using a modified thermoplastic immobilization mask could be affect patient setup deviation in terms of numerical results, various point of view for an immobilization masks has need to research in terms of clinic issue.
Journal of the Korean Society of Environmental Restoration Technology
/
v.17
no.5
/
pp.1-17
/
2014
Research was initiated to investigate early establishment characteristics and germination pattern of Kentucky bluegrass (KB, Poa pratensis L.) under natural room temperature and to analyze differences between alternative and natural conditions for a practical application. Fifteen cultivars of KB were evaluated in the study. Daily and cumulative germination pattern were measured and analyzed on a daily basis. Differences were observed in germination percentage, germination pattern, days to the first germination and days to 75% germination. Germination percentage was variable with cultivars at the end of study. It was 75.75 to 90.25% under natural condition. There were considerable variations in early germination characteristics and germination pattern among KB cultivars according to germination conditions. The first germination in all entries tested was initiated between 6 and 9 DAS (days after seeding) under ISTA (International Seed Testing Association) condition. But it was observed between 9 and 12 DAS under natural condition, being 3 to 5 days later as compared with ISTA condition. On the first date of a germinating process, the germination rate was 0.25% to 25.00% under ISTA condition, while 0.50% to 13.25% under natural condition. Days to the 75% germination were 15.08 to 28.80 DAS under ISTA condition and 17.78 to 28.75 DAS under natural condition. Midnight II, Excursion and Midnight were the fastest cultivars under ISTA condition, while Odyssey the fastest one under natural condition. Regardless of germination condition, the slowest cultivar was Voyager II, being over 4 weeks to 75% germination percentage. For the most cultivars, days to 75% germination under natural room temperature condition were 1 to 8 days slower than under ISTA condition. From this study information on differences in germination characteristics and pattern among cultivars would be usefully applied for KB establishment such as golf course construction. Prior to on-site seeding, a comprehensive germination test is practically recommended due to a possible decline in germination capability during domestic distribution and storage after import.
Kim, Yun-Min;Kim, Chul-Ung;Koh, Jae-Cheon;Park, Dae-Won;Koo, Kee-Kahb
Korean Chemical Engineering Research
/
v.49
no.6
/
pp.732-738
/
2011
Effect of metal oxide catalysts and ionic liquids on the synthesis of methyl carbamate(MC) and dimethyl carbonate (DMC) from urea and methanol was investigated in a high pressure reaction system. In closed system, MC yield from urea and methanol reached almost 100% at reaction temperature over $150^{\circ}C$ without catalyst, whereas DMC yield of 1.5% under was obtained irrespective of catalysts used. In DMC synthesis from MC and methanol, $ZnCl_{2}$ showed the highest catalytic activity and led to the DMC yield of 16.3% under optimal conditions. Furthermore, DMC yield can be enhanced by the simultaneous application of ionic liquids with nano-sized catalysts in semi-continuous reaction system.
A 12-week feeding trial was designed to evaluate the effect of total replacement of fish oil (FO) with terrestrial alternative oils on growth, feed utilization, body composition, hematological parameters, and fillet fatty acid profile of mandarin fish juveniles. Four iso-nitrogenous (56% crude protein) and iso-lipidic (13% crude lipid) practical diets were formulated. A control diet contained 6% FO and three other experimental diets were prepared by replacing FO with linseed oil, soybean oil, and lard (designed as FO, LO, SO, and lard, respectively). Each diet was randomly allocated to triplicate groups of 25 fish ($1.8{\pm}0.03g/fish$) in a circular tank. Complete replacement of FO by three tested alternative oils had no remarkable impact on growth performance, feed utilization efficiency, and morphological and hematological parameters of juvenile mandarin fish. However, daily feed intake was found to be significantly higher for fish fed the SO diet compared with those fed the FO and LO diets. Fish fed LO and SO diets exhibited significantly higher levels of the whole body lipid compared to fish fed diet containing FO. Fillet fatty acid composition reflected dietary fatty acid profile. The highest level of ${\alpha}$-linolenic acid, linoleic acid, and oleic acid was observed in fish fillet fed LO, SO, and lard, respectively. Although the eicosapentaenoic acid level of fish fillet fed diet FO was higher than other treatments, no significant difference was found in docosahexaenoic acid content among all dietary groups. The results of the present study clearly demonstrate that the complete replacement of FO in mandarin fish diets is achievable. These findings are useful in dietary formulation to reduce feed costs without compromising mandarin fish growth.
Proceedings of the Korean Institute of Information and Commucation Sciences Conference
/
2013.10a
/
pp.507-509
/
2013
This paper covers the individual with mild autistic disorder complementary and alternative communication Support program by using Android. The complementary and alternative communication is the communicative system to help handicapped people who have problems with colloquial and non-colloquial communication. In this research, we will introduce the communication manner of autistic disorder, the method of how to measure the language disabled people's selection and frequency of the words, and the basic training method of Autism people's communication ways. In this paper, we developed complementary and alternative communication system which used language representative method to encourage language disabled people to study on communication in effective way. We utilized 'TTS technology' to enable handicapped people delivering their mind with the voice; moreover, by listening their voice by themselves, we accelerated their studies on communications. In addition, by offering 'Painting function', we promoted handicapped people to deliver their purpose widely and efficiently. Also, we built the smart system in 'Painting function' to collect frequency and educated degree data from the users by using this function, we can analyze the percentage of conscious and unconscious communication way of Autism cases to help them.
Lee, Eun Kyung;Eun, Kyoungtae;Ahn, Young Seok;Kim, Yong Taek;Chon, Min-Woo;Choa, Sung-Hoon
Journal of the Microelectronics and Packaging Society
/
v.21
no.4
/
pp.15-24
/
2014
Recently, a variety of printing technologies, including ink jet, gravure, and roll-to-roll (R2R) printing, has generated intensive interest in the application of flexible and wearable electronic devices. However, the actual use of printing technique is much limited because the sintering process of the printed nanoparticle inks remains as a huge practical drawback. In the fabrication of the conductive metal film, a post-sintering process is required to achieve high conductivity of the printed film. The conventional thermal sintering takes considerable sintering times, and requires high temperatures. For application to flexible devices, the sintering temperature should be as low as possible to minimize the damage of polymer substrate. Several alternative sintering methods were suggested, such as laser, halogen lamp, infrared, plasma, ohmic, microwave, and etc. Eventually, the new sintering technique should be applicable to large area, R2R, and polymer substrate as well as low cost. This article reviews progress in recent technologies for several sintering methods. The advantages and disadvantages of each technology will be reviewed. Several issues for the application in R2R process are discussed.
This paper is to compare the carbon-balanced and liner air-fuel ratio determination methods for alternative fuels. In the previous work, expansion of Eltinge chart, unburned hydrocarbon compensation, comparison of the results from various methods were discussed. It has been also concluded that Eltinge method might be regarded as the most general equation of AFR determination among the existing ones. In the recent years, however, increasing demand for the environmental preservation, including global warming-up protection, and energy conservation lead to introduce the alternative fuel to the internal combustion engine. Therefore, the exact calculations of AFR for these fuels are needed. Especially, for the fuel that contains oxygen, all AFR calculation equations except Eltinge have to be re-formulated. In this paper, the AFR for alternative fuel were calculated by re-formulated carbon balance, accuracy of which was already confirmed, and linear equations, which are newly proposed by statistical method for each fuel. The results show that AFRs based on carbon balance have a little more error compared with gasoline, however, the accuracy is enough for this formula to apply to various fuel. The proposed linear equation also have excellent accuracy below $\lambda=1.2$.
Kido Park;Gilltae Roh;Kyunghwa Kim;Changjae Moon;Jongsu Kim
Journal of the Korean Society of Marine Environment & Safety
/
v.29
no.6
/
pp.666-671
/
2023
As international environmental regulations on ship emissions are gradually strengthened, interest in electric propulsion and hybrid propulsion ships is increasing, and various solutions are being developed and applied to these ships, especially stabilization of the power system and system efficiency. The direct current distribution system is being applied as a way to increase the power. In addition, verification and testing of safety and performance of marine DC distribution systems is required. As a result of establishing a DC distribution test bed, verifying the performance of the DC distribution (variable speed power generation) system, and analyzing fuel consumption, this study applied a variable speed power generation system that is applied to DC power distribution for ships, and converted the power output from the generator into a rectifier. A system was developed to convert direct current power to connect to the system and monitor and control these devices. Through tests using this DC distribution system, the maximum voltage was 751.5V and the minimum voltage was 731.4V, and the voltage fluctuation rate was 2.7%, confirming that the voltage is stably supplied within 3%, and a variable speed power generation system was installed according to load fluctuations. When applied, it was confirmed through testing that fuel consumption could be reduced by more than 20% depending on the section compared to the existing constant speed power generation system.
Journal of the military operations research society of Korea
/
v.32
no.1
/
pp.13-35
/
2006
This study aims to propose alternative suggestions for practical and efficient implementation of Dual Use Technology Programs(CUTP) in Korea which can strengthen both national security and industrial competitiveness. DUTP of Korea has suffered from inefficiency and inactivity. This study analyzes the Inefficiency and negative factors of DUTP of Korea by examining the previous cases of the advanced countries. It also examines individual problems of DUTP carefully and attempts to derive alternative solutions to improve the current situation. First, a global government plan should be made considering Korea's weapon system and Korea's industrial characteristics. Second, DUTP should begin to develop core technology in connection with technology level evaluation and technology exchange project should establish a comprehensive information network system which links any civilian and military technology data. Third, technology transfer project should be promoted by utilizing cyber technology exchange market and military defense venture center. Fourth, standardization project should be expanded by establishing a national standard information system.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.