• 대한치과기공학회지
• /
• 제24권1호
• /
• pp.73-81
• /
• 2002

Accurate acquisition of surface geometries such as machined surfaces, biological surfaces, and deformed parts have been very important technique in scientific study and engineering, expecially for system design, manufacturing and inspection. Two camera method is relatively simple with an acceptable accuracy. In this paper, a new method is studied to acquire 3D geometric data of the small object such as a die in stone model. When the devices, cameras, laser beam and object are in a perfect plane, the calculation becomes very simple with less error. But this paper shows that arbitrarily positioned system can also be used to obtain 3D data.

• 제어로봇시스템학회논문지
• /
• 제19권11호
• /
• pp.974-978
• /
• 2013

AVI (Automatic Vision Inspection) systems automatically detect defect features and measure their sizes via camera vision. AVI systems usually report different measurements on the same defect with some variations on position or rotation mainly because different images are provided. This is caused by possible variations from the image acquisition process including optical factors, nonuniform illumination, random noises, and so on. For this reason, conventional area based defect measuring methods have problems of robustness and consistency. In this paper, we propose a new defect size measuring method to overcome this problem, utilizing volume information that is completely ignored in the area based defect measuring method. The results show that our proposed method dramatically improves the robustness and consistency of defect size measurement.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1168-1170
• /
• 2003

The GMS geometric correction method with highspeed and high accuracy is needed. In this paper, a selection method of residual errors for the GMS geometric correction using GCPs (ground control points) is described. Namely, it is a technique for limiting the number of residual error acquisition using GCPs in each block to reduce the processing time. As the result, since the processing time was about 7.0 minutes on conventional geometric correction and about 5.6 minutes on the proposed method, it was shown that the processing time of about 1.4 minutes was shortened.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.252-254
• /
• 2015

Building Information Modeling (BIM) encourages effective information share and utilization among project participants during entire life cycle of facility. This paper presents a method that keeps track of the historical quality records involved in construction operations and facilitates using BIM. The method is coded into BIM based Quality Record Traceability (BIM-QRT) System that makes use of historical records obtained from database administrating construction operations. This study is of value to practitioners because the method makes clear the project participants' responsibility relative to the quality of each and every element of the facility. The main objective of this research is to develop an accurate, fully automated method for construction Quality Record Tracking by using a BIM along with construction operations data obtained by information technology. Test cases verify the usability and validity of the methods implemented in the system.

• 한국위성정보통신학회논문지
• /
• 제2권2호
• /
• pp.48-52
• /
• 2007

최근들어 하드웨어방식의 GPS 수신기를 소프트웨어 방식의 Software-Defined Radio(SDR)기법으로 구성하는 연구가 활발히 진행되고 있다. 이러한 소프트웨어 기반의 GPS 수신기는 기존의 하드웨어 방식으로 처리하는 신호획득부와 추적부를 마이크로 프로세서를 통해 소프트웨어 기법으로 처리하는 것을 말한다. 본 논문에서는 이러한 소프트웨어 기법을 이용하여 GPS 수신기를 설계하며 PC 기반에서 시뮬레이션을 통해 신호획득부, 추적부, 메시지 복조부를 설계하고 검증한다. 또한 의사거리 오차를 도출하기 위하여 신호 획득부와 추적부에 대해 효율적인 알고리즘을 제안하고 최종적으로L1 주파수대역의 여러 위성을 통해 수신된 채널간의 상대적 지연을 통해 의사거리를 계산한다. 본 논문에서 제시된 수신기기법은 향후 개발목표인 GPS/Galileo 복합시스템의 개발요소에 포함될 것이며 규격 및 성능을 검증할 방법을 제시할 뿐만 아니라 다양한 디버깅 환경을 제공함으로써 개발단계에 매우 유용하게 적용될 것이다.

• 한국항행학회논문지
• /
• 제17권6호
• /
• pp.616-624
• /
• 2013

전파 교란신호가 발생할 경우, GPS 기반의 정밀위치제공시스템에 오작동을 일으킬 수 있으며 특히, 항공분야에서는 더 심각한 피해가 발생할 수 있다. 하나의 전파교란원에 대한 대응 기법이나 위치 추정 기법의 연구결과는 잘 알려져 있으나, 다수의 전파교란원이 다양한 형태의 신호를 송출할 경우에는 대응 및 위치 추정이 어렵다. 따라서 본 논문에서는 다수의 전파위협원이 CW, DSSS, SCW 형태의 신호를 송출할 경우에 위치 추정을 수행할 수 있도록 하기 위하여 신호 식별 및 측정치 획득 방법을 제안한다. 또한 제안한 방법을 검증하기 위하여 MATLAB을 이용하여 모의실험을 수행하였다. 실험 결과로부터 제안한 방법은 CW, DSSS, SCW 형태의 교란신호를 정상적으로 식별하고 측정치를 정확하게 획득하는 것을 검증하였다.

• 한국군사과학기술학회지
• /
• 제18권5호
• /
• pp.558-565
• /
• 2015

The current methods, such as Binomial Probability Distribution or T-test, to calculate the number of samples of Precise Guided Missiles(PGMs) for test and evaluation are statistically problematic to make reasonable decisions thus use the budget efficiently. Also, the method to verify an accuracy rate of the PGMs using these old methods seems to be lack of objectiveness. This paper presents an effective, efficient solution adapted from the clinical medicine testing method of healthcare industry research, which may overcome our problems. This method considers and addresses both manufacturers' and consumers' risk simultaneously. By taking into account the weapon system project characteristics which take a relatively longer time and require higher-level budget, this approach also suggests a reasonable and feasible method to determine the amount of samples of the PGMs and making a criterion to verify an accuracy rate of the missiles that are required to test. Thus, this method is expected to contribute to acquisition and operations of high-reliability PGMs by MND and its field-users.

• Current Optics and Photonics
• /
• 제8권2호
• /
• pp.127-137
• /
• 2024

The distribution of tags is an important factor that affects the performance of radio-frequency identification (RFID). To study RFID performance, it is necessary to obtain RFID tags' coordinates. However, the positioning method of RFID technology has large errors, and is easily affected by the environment. Therefore, a new method using optical measurement is proposed to achieve RFID performance analysis. First, due to the possibility of blurring during image acquisition, the paper derives a new image prior to removing blurring. A nonlocal means-based method for image deconvolution is proposed. Experimental results show that the PSNR and SSIM indicators of our algorithm are better than those of a learning deep convolutional neural network and fast total variation. Second, an RFID dynamic testing system based on photoelectric sensing technology is designed. The reading distance of RFID and the three-dimensional coordinates of the tags are obtained. Finally, deep learning is used to model the RFID reading distance and tag distribution. The error is 3.02%, which is better than other algorithms such as a particle-swarm optimization back-propagation neural network, an extreme learning machine, and a deep neural network. The paper proposes the use of optical methods to measure and collect RFID data, and to analyze and predict RFID performance. This provides a new method for testing RFID performance.

• 핵의학기술
• /
• 제12권1호
• /
• pp.33-38
• /
• 2008

Purpose: The Gated cardiac blood pool scan is non-invasive method that a quantitative evaluation of left ventricular function. Also this scan have shown the value of radionuclide ejection fraction measurements during the course of chemotherapy as a predictor of cardiac toxicity. Therefore a reliable method of monitoring its cardiotoxic effects is necessary. the purpose of this study is to minimize the overestimate of left ventricular ejection fraction (LVEF) by modified body position to reduce the influence of scattered rays from surrounding organs of the heart in the background region of interest. Materials and Methods: Gated cardiac blood pool scan using in vivo $^{99m}Tc$-red blood cell (RBC) was carried out in 20 patients (mean $44.8{\pm}8.6$ yr) with chemotherapy for a breast carcinoma. Data acquisition requires about 600 seconds and 24 frames of one heart cycle by the multigated acquisition mode, Synchronization deteriorates toward the end of the cycle and with the distance from the trigger signal (R-wave) by ECG gating. Gated cardiac blood pool scan was studied with conventional method (supine position and the detector head in $30-45^{\circ}$ left anterior oblique position and caudal $10-20^{\circ}$ tilt) and compared with modified method (left lateral flexion position with 360 mL of drinking water). LVEF analysis was performed by using the automatically computer mode. Results: The ROI counts of modified scan method were lower than LV conventional method ($1429{\pm}251$ versus $1853{\pm}243$, <0.01). And LVEF of modified method was also decrease compared with conventional method ($58.3{\pm}5.6%$ versus $65.3{\pm}6.1%$, <0.01). Imaging analysis indicated that stomach was expanded because of water and spleen position was changed to lateral inferior compared with conventional method. Conclusion: This study shows that the modified method in MUGA reduce the influence of scattered rays from surrounding organs. Because after change the body position to left lateral flexion and drinking water, the location of spleen, left lobe of liver and stomach had changed and they could escaped from background ROI. Therefore, modified method could help to minimize the overestimate LVEF (%).

• 지구물리와물리탐사
• /
• 제8권1호
• /
• pp.59-66
• /
• 2005

이 논문의 주 목적은 효율이 높은 공통중간점(CMP) 자료 획득 방법에 대해 서술함으로써, GPR탐사의 적용성을 넓히기 위함이다. CMP 자료 획득의 효율을 높이기 위한 가장 중요한 기술적 혁신은 실시간 이동 GPS(RTK-CPS)를 이용한 GPR 안테나의 위치 연속 모니터링이다. 이 연구에서 제안한 자동 안테나 이동 시스템은 GPR 탐사에서 시간을 가장 많이 요구하는 특정 지점에 안테나를 위치시키는 과정이 필요없기 때문에 탐사 시간 효율이 개선된다. 수치적 실험으로부터 자료획득 효율이 향상됨에 따라 자료의 밀도 및 CMP 중합수가 늘어나는 것을 예측할 수 있었으며, 이는 결과적인 자료의 신호대 잡음비 향상을 초래한다. 현장 적용은 이러한 가설을 입증하였으며, 이 연구에서 제안된 방법을 CMP 방식의 GPR 탐사를 좀 더 실질적이고 널리 사용될 수 있게 한다. 게다가 이 방법은 정밀한 지하수 정보를 제공할 수도 있는데, 이는 CMP 방식으로 얻은 공간적으로 조밀한 유전상수 분포를 물포화도와 갈이 지하수 특성과 관계 깊은 조밀한 물리량 분포로 변환할 수 있기 때문이다.