• 제목/요약/키워드: Technology Leakage

검색결과 1,719건 처리시간 0.028초

국내 해양 CCS 사업의 HSE 관리 프레임워크 구축 전략 (Strategy for Development of HSE Management Framework for Offshore CCS Project in Korea)

  • 노현정;강관구;강성길;이종갑
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제20권1호
    • /
    • pp.26-36
    • /
    • 2017
  • 지구온난화를 방지하기 위해 대량의 $CO_2$를 감축 시킬 수 있는 해양 CCS(Carbon dioxide Capture and Storage) 실증 및 상용화를 국내에서 준비 중이다. 해양 CCS 사업은 해양내 심부 퇴적층을 대상으로 대규모 $CO_2$를 수송, 주입, 저장하는 기술로써, 누출 등의 사고 발생 시 인명, 환경, 재산 등에 큰 피해를 야기할 잠재적 가능성을 가지고 있다. 따라서 해양 CCS 사업 안전성을 확보하기 위해서는 생애주기에 걸쳐서 유 가스 생산 해양플랜트에 준하는 엄격한 HSE(Health, Safety and Environment) 관리 방안이 요구된다. 하지만 국내에는 CCS 사업에 적용 가능한 HSE 법 또는 규정이 없을 뿐만 아니라 관련 연구도 미비한 상황이다. 이에 본 연구에서는 국외 해양플랜트 관련 HSE 관리 방법론, 해양 CCS HSE 관리 가이드라인 및 국외 사례를 분석하고, 이를 통하여 국내에서 해양 CCS를 추진시 HSE 관리 프레임워크 구축에 필요한 요구사항을 도출하였다. 이를 위해 본 연구에서는 먼저 범용적으로 활용되는 위험 관리방법론인 ISO 31000에 대한 분석을 수행하였다. 또한 해양플랜트 HSE 관리체계를 체계적으로 구축 운영 중인 노르웨이와 영국의 해양 CCS HSE 관리가이드라인 및 적용사례를 각각 분석하였다. 이를토대로 국내에서 해양 CCS 사업 추진시 HSE 관리 프레임워크 구축을 위해 우선적으로 수행해야할 사항으로 HSE Philosophy의 작성의 필요성을 피력하였고 생애주기 단계에 따른 HSE 관리 프로세스를 제안하였다. 본 논문에서 제안한 HSE 관리 프레임워크를 통해 국내 해양 CCS 실증 사업 추진시 기획 설계 단계부터 HSE 관리를 한다면 보다 안전하고 체계적인 사업을 이행할 수 있을 것으로 기대된다.

실내 위치기반 사물인터넷 채팅 서비스 설계 및 구현 (Design and Implementation of IoT Chatting Service Based on Indoor Location)

  • 이성희;정설영;강순주;이우진
    • 한국통신학회논문지
    • /
    • 제39C권10호
    • /
    • pp.920-929
    • /
    • 2014
  • 최근 통신, 교통, 의료, 산업시설 등에서 수요가 급증하고 있는 임베디드 시스템은 단순한 임베디드 시스템이 아닌 다양한 임베디드 기기의 동작이 통신을 통해 관찰되고 제어되는 Cyber Physical System(CPS)으로 확장되었다. 또한 구글 글래스, 삼성 갤럭시 기어, 소니 스마트 워치 등의 웨어러블 기기를 활용한 사물인터넷(IoT) 기술활용에 대한 관심이 증가하고 있다. 이러한 상황에서 삼성전자의 스마트홈(Smart Home)과 LG전자의 홈챗(Home Chat)이 잇따라 출시되고 있다. 하지만 이러한 서비스들은 스마트폰과 가전기기간에만 통신이 가능하며 그 이외의 단말과는 통신이 불가능하며 모든 정보는 상업용 포털이 운영하는 글로벌 메시징 서버를 통하여 통신이 이루어진다는 단점이 있다. 본 논문에서는 앞서 언급한 단점을 보완하기 위해 단위공간 기반 실내위치인지망 구축하는 구조를 제안한다. 이를 통해 기기들 및 개개인에 대한 정보가 외부로 유출되는 것을 방지하면서 사물인터넷 채팅을 통해 망 내에 존재하는 모든 단말과의 선택적 통신이 가능하다. 또한 좀 더 범용적인 기기 제어가 가능해지고 개인정보의 외부유출 방지가 가능하다.

오염지하수 유입방지를 위한 압축패커 그라우팅 장치 개발 (Development of the Compressed Packer Grouting Device for Preventing the Inflow of Polluted Groundwater)

  • 조희남;최상일
    • 지질공학
    • /
    • 제19권4호
    • /
    • pp.433-439
    • /
    • 2009
  • 압축패커장치는 지하수관정의 지표하부오염방지시설의 개선을 위하여 개발한 장치이다. 이 장치는 안전잠금장치의 해제와 케이싱의 압축조작이 단순하여 시공이 간편하고, $4.5\;kg/cm^2$의 내압성을 갖고 있어 지하수 누출이 없도록 수밀성을 갖추고 있으며, 단일케이싱을 설치하며 그라우팅을 위한 확공은 300 mm로 굴착 가능하므로 시공비를 절약할 수 있다. 압축패커의 재질은 실리콘 고무를 사용하여 신장율이 590%이고 Pb, Cd, 페놀 등의 유해성분이 기준치 이하거나 불검출되어 우수한 환경성을 가지고 있다. 또한 시공비가 기존의 그라우팅 공법의 35~62% 이하, 환경신기술 제 47호인 팽창 패커 공법의 87% 이하로 시공이 가능한 경제적인 방법이며, 지하수 수질보전등에 관한 규칙, 제주도 지하수개발 이용시설 설치 및 관리기준, 환경부와 농림수산식품부의 소규모수도시설 운영관리 방안 지침 등 관련 법령규정에 적합한 제품이다.

High Performance Flexible Inorganic Electronic Systems

  • 박귀일;이건재
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
    • /
    • pp.115-116
    • /
    • 2012
  • The demand for flexible electronic systems such as wearable computers, E-paper, and flexible displays has increased due to their advantages of excellent portability, conformal contact with curved surfaces, light weight, and human friendly interfaces over present rigid electronic systems. This seminar introduces three recent progresses that can extend the application of high performance flexible inorganic electronics. The first part of this seminar will introduce a RRAM with a one transistor-one memristor (1T-1M) arrays on flexible substrates. Flexible memory is an essential part of electronics for data processing, storage, and radio frequency (RF) communication and thus a key element to realize such flexible electronic systems. Although several emerging memory technologies, including resistive switching memory, have been proposed, the cell-to-cell interference issue has to be overcome for flexible and high performance nonvolatile memory applications. The cell-to-cell interference between neighbouring memory cells occurs due to leakage current paths through adjacent low resistance state cells and induces not only unnecessary power consumption but also a misreading problem, a fatal obstacle in memory operation. To fabricate a fully functional flexible memory and prevent these unwanted effects, we integrated high performance flexible single crystal silicon transistors with an amorphous titanium oxide (a-TiO2) based memristor to control the logic state of memory. The $8{\times}8$ NOR type 1T-1M RRAM demonstrated the first random access memory operation on flexible substrates by controlling each memory unit cell independently. The second part of the seminar will discuss the flexible GaN LED on LCP substrates for implantable biosensor. Inorganic III-V light emitting diodes (LEDs) have superior characteristics, such as long-term stability, high efficiency, and strong brightness compared to conventional incandescent lamps and OLED. However, due to the brittle property of bulk inorganic semiconductor materials, III-V LED limits its applications in the field of high performance flexible electronics. This seminar introduces the first flexible and implantable GaN LED on plastic substrates that is transferred from bulk GaN on Si substrates. The superb properties of the flexible GaN thin film in terms of its wide band gap and high efficiency enable the dramatic extension of not only consumer electronic applications but also the biosensing scale. The flexible white LEDs are demonstrated for the feasibility of using a white light source for future flexible BLU devices. Finally a water-resist and a biocompatible PTFE-coated flexible LED biosensor can detect PSA at a detection limit of 1 ng/mL. These results show that the nitride-based flexible LED can be used as the future flexible display technology and a type of implantable LED biosensor for a therapy tool. The final part of this seminar will introduce a highly efficient and printable BaTiO3 thin film nanogenerator on plastic substrates. Energy harvesting technologies converting external biomechanical energy sources (such as heart beat, blood flow, muscle stretching and animal movements) into electrical energy is recently a highly demanding issue in the materials science community. Herein, we describe procedure suitable for generating and printing a lead-free microstructured BaTiO3 thin film nanogenerator on plastic substrates to overcome limitations appeared in conventional flexible ferroelectric devices. Flexible BaTiO3 thin film nanogenerator was fabricated and the piezoelectric properties and mechanically stability of ferroelectric devices were characterized. From the results, we demonstrate the highly efficient and stable performance of BaTiO3 thin film nanogenerator.

  • PDF

수소충전시설에 대한 정량적 위험성 평가 및 모델적용에 관한 연구 (A Study on Quantitative Risk Analysis & Model Application for Hydrogen Filling Center)

  • 신정수;변헌수
    • 한국가스학회지
    • /
    • 제16권6호
    • /
    • pp.87-101
    • /
    • 2012
  • 가스 산업은 고도화와 복잡성으로 인하여 잠재적인 대형사고의 발생위험이 날로 높아가고 있으며, 특히 가연성, 인화성, 폭발성 및 독성물질 등을 대량으로 취급 및 제조함으로써, 사고발생 가능성은 낮지만 일단 사고가 발생하게 되면 사업장 내부의 근로자뿐만 아니라 인근 주민과 환경에 까지 영향을 미치며, 가스제조 시설의 특성상 산업계에 끼치는 파급효과도 매우 크다. 수소가스는 화학 산업 및 산업계 전반에 걸쳐 중요하게 사용되는 기초 원료이며, 특히 2000년 이후 지구온난화가 대두됨에 따라 지구온난화를 방지할 수 있는 대체에너지로 각광 받고 있으나, 분자량이 낮아 다른 가스에 비하여 고압(150 bar.g 이상)으로 실린더 등의 저장용기에 충전하여 사용해야 한다. 수소는 가연성, 폭발성 물질로써 누출(Leakage)로 인하여 화재나 폭발로 이어지는 사고가 많이 발생하고 있다. 이러한 재해를 줄이기 위해서는 단순한 안전관리에서 벗어나 생산 공정중의 잠재위험(Hazard)을 확인하여 기술적으로 평가한 후, 이 결과를 반영하는 체계적인 안전관리 시스템이 필요하다. 본 연구는 산업계 전반에서 사용되고 있는 기초 원료인 가연성, 폭발성의 수소가스 충전시설에 대한 정량적 위험성평가를 실시하였으며, 평가 결과 수소 충전시설에 대한 중요안전요소(EIS, Elements Important for Safety)의 도출 및 이의 효과적 관리방안을 제안하였으며, 사고사례를 통하여 위험성평가 모델의 신뢰성을 검증하였다.

소용량 건물용 연료전지시스템 블로워의 가혹조건 평가에 관한 연구 (A Study on the Worst Stress Condition Test Evaluation of Blowers for Small Stationary Fuel Cell System)

  • 김강수;이덕권;이정운;김은정;김인찬;김영규;신헌용
    • 한국가스학회지
    • /
    • 제16권6호
    • /
    • pp.34-40
    • /
    • 2012
  • 연료전지는 우수한 도시가스 인프라로 안정적인 에너지공급이 가능하고, 연료 다변화가 가능한 신에너지 기술이다. 연료전지 상용화를 위해 시스템의 성능 및 신뢰성뿐만 아니라, 가격의 저감이 필수적이다. 소용량 건물용 연료전지시스템에서 가격비중이 매우 높은 보조기기의 가격저감 연구의 일환으로, 국내 제작된 블로워의 안전성능을 평가하고 개선방향을 모색하고자 하였다. 본 연구에서는 실제 연료전지시스템의 작동환경과 가장 유사한 환경에서 블로워의 성능 및 가혹조건 평가를 수행하였다. 블로워를 $70^{\circ}C$ 온도조건에서 장기 가동 시 유량성능, 기밀성능 및 열적거동의 상관관계를 파악하여, 블로워의 성능 저하에 영향을 미치는 모터열화, 다이어프램 재질 및 토출구 구조 등의 주요인자를 도출하였다.

가스밸브의 변형거동 안전성에 관한 유한요소해석 (Finite Element Analysis on the Deformation Behavior Safety of a Gas Valve)

  • 김청균
    • 한국가스학회지
    • /
    • 제21권4호
    • /
    • pp.70-75
    • /
    • 2017
  • 본 연구에서는 차단기능형 수평식 가스밸브와 기존 수직식 가스밸브의 변형거동 안전성을 FEM으로 해석하였다. FEM 해석결과에 의하면, 차단기능형 수평식 가스밸브의 나사부와 가스방출구에 가스내압이 작용할 때 밸브몸체의 우측 끝단부에서 최대 변형량 $4.4{\mu}m$가 발생하였다. 두 번째로 큰 변형량 $2.9{\mu}m$는 안전밸브가 설치된 포트의 끝단부에 형성된 것으로 나타났다. 이렇게 작은 변형량이 발생한 것은 나사부, 가스방출구, 스템 및 스핀들 축이 장착되는 포트, 안전밸브 포트로 구성되는 수평식 가스밸브의 평형이 잘 이루어지도록 설계되었기 때문이다. 반면에 나사부와 가스방출구에 가스내압이 작용할 때, 기존 차단기능형 수직식 가스밸브의 상단부에서 최대 변형량 0.076mm가 형성된 것으로 나타났다. 가스유출구의 좌측 끝단부에서 두 번째로 큰 최대 변형량 0.055mm가 발생하였다. 이러한 변형량은 차단기능형 안전장치의 그루브에 삽입된 오링의 밀봉간극에 영향을 미칠 가능성이 높다. 따라서 본 연구에서는 LPG 용기용 가스밸브의 가스누출을 완벽하게 차단할 수 있는 메커니즘을 갖춘 차단기능형 수평식 가스밸브가 수직식 가스밸브에 비해 우수하다할 수 있다.

X선촬영실 내에서의 공간산란선량 변동에 관한 연구 (A Study on the Behavior of the Free Space Scatter dose in X-ray Diagnostic Room)

  • 오현주;김성수;김영일;임한영;김흥태;이후민;김학성;이상석
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제17권2호
    • /
    • pp.21-27
    • /
    • 1994
  • In this pauper, when the X-ray exposure condition is 70, 90, 110 kV, 10 mAs, FFD 180 cm, FSO $10{\times}10$, $35{\times}35\;cm$, toward the $36{\times}36{\times}15\;cm$ acryl phantom, the free space scatter dose rate at the 15th points in X-ray diagnostic room was measured by electrometer and 1800 co ionization chamber. Therefore, the free space scatter dose distribution profile was drown, and then, the free space scatter dose contribution percentage was Investigated. The obtained results are summarized as following. 1. The X-ray tube leakage dose rate of the experiment generator at the 1 m from focus was measured maximum 85 mR/hr, minimum 20 mR/hr, therefore, this values was appeared below the KS rules, 2. The free space scatter dose become to larger at the primary X-ray beam around area, and lower at the back ward X-ray tube. The maximum values were 3,812 mR/hr at the front Lt 1 m $45^{\circ}$ point, minimum 117 mR/hr at the back ward 1 m $180^{\circ}C$ point. 3. As the more tube voltage and field size increase, the more free space scatter dose contribution percentage become to increase, as to 90 kV from 70 kV, increase to 12 %, to 110 kV from 90 kV, increase to 18 %, and then, become to 11 % at the $10{\times}10\;cm$ and 87 % at the $35{\times}35\;cm$. 4. The 89 % of the total producted scatter ray occured from acryl phantom, at the X-ray tube housing 6 %, at the front side back wall 5 %. 5. The free space scatter dose contribution percentage at the one point build up 80 % from the phanton direction, 14 % from the X-ray tube and collimator direction, 2.2 % from the front wall, 1.8 % from the side wall, 1.7 % the back wall.

  • PDF

장기 신뢰성 평가를 위한 태양전지의 열충격 시험 특성에 관한 연구 (The Study on Thermal Shock Test Characteristics of Solar Cell for Long-term Reliability Test)

  • 강민수;김도석;전유재;신영의
    • 에너지공학
    • /
    • 제21권1호
    • /
    • pp.26-32
    • /
    • 2012
  • 본 연구에서는 PV(photovoltaic)모듈에서 경년에 따른 효율 저하의 원인을 분석하기 위해 셀 레벨에서의 열충격 시험을 수행하였다. 열충격 시험의 조건은 $-40^{\circ}C$에서 $85^{\circ}C$로 각각 15분씩 30분을 1사이클로 하였으며, 열충격 시험 500 사이클 동안 100 사이클 간격으로 EL분석 및 I-V분석을 수행하였다. 효율 감소율은 단결정 Bare Cell이 8%, Solar Cell이 9%였으며, 다결정 Bare Cell이 6%, Solar Cell이 13%의 감소율을 보였다. 열충격 시험 후 Solar Cell은 표면 손상으로 인한 효율저하를 확인할 수 있었다. Bare Cell의 경우 표면의 손상이 없었지만, 효율이 저하된 것을 확인할 수 있었다. 이는 Fill Factor 분석에 의해 경년 시 나타나는 누설전류에 의한 소모전력 증가로 효율 저하에 영향을 준 것으로 판단된다. 또한, Bare Cell보다 Solar Cell에서의 효율 감소율이 상대적으로 높게 나타난 결과는 표면 손상 및 소모 전력의 증가로 인해 Solar Cell 효율에 큰 영향을 미치는 것으로 판단된다. 향후 단면 분석법 및 다양한 조건의 시험 기법을 활용하여 PV모듈 뿐 아니라 Cell 레벨에서의 불규칙한 효율 및 Fill Factor의 감소 원인을 검토하고, Solar Cell에서의 효율 저하가 가속되는 원인에 대한 대책 방안 연구가 수행되어야 할 것이다.

Physiological Response of Young Seedlings from Five Accessions of Diospyros L. under Salinity Stress

  • Wei, Ping;Yang, Yong;Fang, Ming;Wang, Fei;Chen, Hejie
    • 원예과학기술지
    • /
    • 제34권4호
    • /
    • pp.564-577
    • /
    • 2016
  • Salinity stress limits plant cultivation in many areas worldwide; however, persimmon (Diospyros spp.) has high tolerance to salt. Five accessions of Diospyros [three of Diospyros lotus (accession numbers 824, 846, and 847); one of Diospyros kaki var. sylvestris (869); and one of Diospyros virginiana (844)] were chosen for analysis of salinity stress. We compared the effects of salt stress on plant growth, relative water content (RWC), malondialdehyde (MDA), electrolyte leakage (EL), hydrogen peroxide content ($H_2O_2$), and antioxidative enzyme activities (superoxide dismutase, SOD; catalase, CAT; peroxidase, POD; and ascorbate peroxidase, APX) in leaves of healthy potted seedlings from each of the five accessions after salt treatment for 25 days. Salt stress affected the growth of plants in all five accessions, with all three D. lotus accessions showing the most severe effect. Salt stress increased membrane lipid peroxidation in all accessions, but a stronger increase was observed in the three D. lotus accessions. Moreover, accumulation of $H_2O_2$ was faster in salt-sensitive D. lotus compared to salt-tolerant D. virginiana 844. The activities of all antioxidant enzymes increased in D. virginiana 844 and in D. kaki var. sylvestris 869; the activities of SOD, CAT, and APX were at similar levels in D. virginiana 844 and D. kaki var. sylvestris 869, but POD activity was stimulated to a greater extent in D. virginiana 844. The activities of all antioxidant enzymes (except POD) decreased in D. lotus 824 and increased (except for SOD) in D.lotus 846. The activities of SOD and APX decreased in D. lotus 847, whereas POD and CAT activities both increased. Relative water content decreased significantly in D. lotus. No significant changes in lipid peroxidation or relevant antioxidant parameters were detected in any of the accessions in controls treated with 0.0% NaCl. D. virginiana 844 had higher antioxidant capacity in response to salinity compared to other persimmon rootstocks. These results indicate that changes of these key physiological variables are related to salinity resistance in different accessions of persimmon.