• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• 제8권4호
• /
• pp.311-318
• /
• 2010

U. S. NRC Regulation Guide 1.52 regulating ESF ACS in nuclear power plants has been revised to revision 3. To apply reduction of operability test time, allowance of alternative challenge agents for in-place leak test of HEPA filters, and upgrade of Methyl Iodide penetration acceptance criterion in activated carbon performance test suggested in Reg. Guide 1.52(Rev.3) on Yonggwang units 5 and 6 ESF ACSes, technical feasibility study was carried out with on-site experiments as well as experiments with a lab-scale model. It was confirmed that the moisture in the system returned to the level before the test in 1 or 4 days even though the moisture was removed during the operability test lasting more than 10 hours. Therefore, it is appropriate to perform monthly operability test in 15 minutes just long enough to check the operability of equipment. To change challenge material for in-place HEPA filter leak test, size of aerosol, production rate, and leak detection capability were compared for DOP and PAO. It was concluded that PAO can be substituted for DOP in nuclear power plants. The upgrade of Methyl Iodide penetration acceptance criterion from 0.175 % to 0.5 % in active carbon filter bed deeper than 4 inches was to conform to the change of activated carbon performance test method to ASTM D3803(1989). It was confirmed that Methyl Iodide penetration acceptance criterion of 0.5 % under $30^{\circ}C$, relative humidity 95 % condition was conservatively good enough for testing performance of active carbon insitu. The licence change of Yonggwang units 5 and 6 has been completed based on this study.

• Current Research on Agriculture and Life Sciences
• /
• 제9권
• /
• pp.37-49
• /
• 1991

This study was conducted to estimate the effects of year, age of dam at calving, farm and lactation period on milk yield with the data of 4,008 cows' records which were collected at 32 farms by Korea Animal Improvement Association from 1985 to 1989. The results obtained in this study are summarized as follows: 1. The average performance of the dairy cattle in the study were $5,959.23{\pm}2,113.03kg$ in actual milk yield, $49.19{\pm}22.77$ months in age of dam at calving, $27.11{\pm}5.13$ months in age at first calving and $255.11{\pm}79.68$ days in lactation period. 2. The percentages of variance component for different sources were 29.39% for the residuals, 1.91% for years, 4.86% for age at calving, 8.89% for farms and 54.94% for lactation period. 3. The overall mean of least-square estimate on the milk yield was 6,229.31kg. In the effects of year, the least-square means of milk yield were estimated 6,000.76kg in 1985-1987, 6,028.11kg in 1988 and 6,659.07kg in 1989. 4. The least-square means of calving age on the milk yield were estimated 5,456.01kg in less than 24 months, 6,565.48kg in 61-66 months which were the highest least-square means. This effects were gradually increased until the 61-66months and gradually decreased after the 61-66months, with highly significant differences among different months of age at calving(p<0.01). 5. In the effects of farm, the least-square means of milk yield were estimated 4,959.50 kg in the lowest farm and 7,497.07kg in the highest farm. Among the milk yield of each farm the effects showed highly significant difference(p<0.01). 6. The least-square means of milk yield in the effects of lactation period were gradually increased with the lapse of the lactation period. Among the lactation period the effects showed highly significant difference(p<0.01).

• Journal of Intelligence and Information Systems
• /
• 제17권4호
• /
• pp.95-108
• /
• 2011

TThis is a study of the personalization method that intelligently adapts the level of clustering considering purchasing index of a customer. In the e-biz era, many companies gather customers' demographic and transactional information such as age, gender, purchasing date and product category. They use this information to predict customer's preferences or purchasing patterns so that they can provide more customized services to their customers. The previous Customer-Segmentation method provides customized services for each customer group. This method clusters a whole customer set into different groups based on their similarity and builds predictive models for the resulting groups. Thus, it can manage the number of predictive models and also provide more data for the customers who do not have enough data to build a good predictive model by using the data of other similar customers. However, this method often fails to provide highly personalized services to each customer, which is especially important to VIP customers. Furthermore, it clusters the customers who already have a considerable amount of data as well as the customers who only have small amount of data, which causes to increase computational cost unnecessarily without significant performance improvement. The other conventional method called 1-to-1 method provides more customized services than the Customer-Segmentation method for each individual customer since the predictive model are built using only the data for the individual customer. This method not only provides highly personalized services but also builds a relatively simple and less costly model that satisfies with each customer. However, the 1-to-1 method has a limitation that it does not produce a good predictive model when a customer has only a few numbers of data. In other words, if a customer has insufficient number of transactional data then the performance rate of this method deteriorate. In order to overcome the limitations of these two conventional methods, we suggested the new method called Intelligent Customer Segmentation method that provides adaptive personalized services according to the customer's purchasing index. The suggested method clusters customers according to their purchasing index, so that the prediction for the less purchasing customers are based on the data in more intensively clustered groups, and for the VIP customers, who already have a considerable amount of data, clustered to a much lesser extent or not clustered at all. The main idea of this method is that applying clustering technique when the number of transactional data of the target customer is less than the predefined criterion data size. In order to find this criterion number, we suggest the algorithm called sliding window correlation analysis in this study. The algorithm purposes to find the transactional data size that the performance of the 1-to-1 method is radically decreased due to the data sparity. After finding this criterion data size, we apply the conventional 1-to-1 method for the customers who have more data than the criterion and apply clustering technique who have less than this amount until they can use at least the predefined criterion amount of data for model building processes. We apply the two conventional methods and the newly suggested method to Neilsen's beverage purchasing data to predict the purchasing amounts of the customers and the purchasing categories. We use two data mining techniques (Support Vector Machine and Linear Regression) and two types of performance measures (MAE and RMSE) in order to predict two dependent variables as aforementioned. The results show that the suggested Intelligent Customer Segmentation method can outperform the conventional 1-to-1 method in many cases and produces the same level of performances compare with the Customer-Segmentation method spending much less computational cost.

• Journal of Intelligence and Information Systems
• /
• 제24권3호
• /
• pp.21-44
• /
• 2018

In recent years, the rapid development of internet technology and the popularization of smart devices have resulted in massive amounts of text data. Those text data were produced and distributed through various media platforms such as World Wide Web, Internet news feeds, microblog, and social media. However, this enormous amount of easily obtained information is lack of organization. Therefore, this problem has raised the interest of many researchers in order to manage this huge amount of information. Further, this problem also required professionals that are capable of classifying relevant information and hence text classification is introduced. Text classification is a challenging task in modern data analysis, which it needs to assign a text document into one or more predefined categories or classes. In text classification field, there are different kinds of techniques available such as K-Nearest Neighbor, Naïve Bayes Algorithm, Support Vector Machine, Decision Tree, and Artificial Neural Network. However, while dealing with huge amount of text data, model performance and accuracy becomes a challenge. According to the type of words used in the corpus and type of features created for classification, the performance of a text classification model can be varied. Most of the attempts are been made based on proposing a new algorithm or modifying an existing algorithm. This kind of research can be said already reached their certain limitations for further improvements. In this study, aside from proposing a new algorithm or modifying the algorithm, we focus on searching a way to modify the use of data. It is widely known that classifier performance is influenced by the quality of training data upon which this classifier is built. The real world datasets in most of the time contain noise, or in other words noisy data, these can actually affect the decision made by the classifiers built from these data. In this study, we consider that the data from different domains, which is heterogeneous data might have the characteristics of noise which can be utilized in the classification process. In order to build the classifier, machine learning algorithm is performed based on the assumption that the characteristics of training data and target data are the same or very similar to each other. However, in the case of unstructured data such as text, the features are determined according to the vocabularies included in the document. If the viewpoints of the learning data and target data are different, the features may be appearing different between these two data. In this study, we attempt to improve the classification accuracy by strengthening the robustness of the document classifier through artificially injecting the noise into the process of constructing the document classifier. With data coming from various kind of sources, these data are likely formatted differently. These cause difficulties for traditional machine learning algorithms because they are not developed to recognize different type of data representation at one time and to put them together in same generalization. Therefore, in order to utilize heterogeneous data in the learning process of document classifier, we apply semi-supervised learning in our study. However, unlabeled data might have the possibility to degrade the performance of the document classifier. Therefore, we further proposed a method called Rule Selection-Based Ensemble Semi-Supervised Learning Algorithm (RSESLA) to select only the documents that contributing to the accuracy improvement of the classifier. RSESLA creates multiple views by manipulating the features using different types of classification models and different types of heterogeneous data. The most confident classification rules will be selected and applied for the final decision making. In this paper, three different types of real-world data sources were used, which are news, twitter and blogs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제17권12호
• /
• pp.407-414
• /
• 2016

This study was conducted to investigate the effects of supplementation of dietary betaine on nutrient digestibility and physiological responses in finishing pigs. A total of twelve pigs with a body weight of $80.1{\pm}3.7kg$ were individually caged, and randomly assigned to one of the two experimental diets containing 0 (control) or 5 g/kg (treatment) of the betaine in a $2{\times}2$ Latin square design. The experimental period was 14 days-7 days adaptation and 7 days trial period-per phase. All data for the difference between control and treatment groups were statistically analyzed by student's t-test. Dry matter and crude protein digestibility in the treatment group were significantly improved by 1% and 1.3%, respectively, as compared with those in the control (p<0.05). The apparent absorption of dietary energy was increased from 82.3% to 83.7% by dietary betaine supplementation. Thus, the retention of energy was also significantly increased to above 6% in the treatment group compared with the control group (control 4,057 vs treatment 4,314 kcal; p<0.01). The physiological parameters indicating serum biochemical contents and stress-, immune-, and inflammatory- responses were not changed by the supplementation of dietary betaine. In conclusion, dietary betaine improves the nutrient digestibility without any negative effects in terms of physiology in finishing pigs. It suggests that the supplementation of dietary betaine may increase the productivity through the improvement of weight gain and feeding efficiency.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 한국식품저장유통학회 2004년도 총회및 심포지움
• /
• pp.67-72
• /
• 2004

Quality of fresh-cut tomato slices was compared during cold storage under various modified atmosphere packaging conditions. Chilling injury of slices in containers sealed with Film A was higher than with Film B; these films had oxygen transmission rates of 87.4 and 60.0 ml $h^{-1}\;m^{-2}\;atm^{-1}$ at $5^{\circ}C\;and\;99\%$ RH, respectively. While slices in containers with an initial atmospheric composition of air, $4\%\;CO_2+1\;or\;20\%\;O_2,\;8\%\;CO_2+1\;or\;20\%\;O_2,\;or\;12\%\;CO_2+20\%\;O_2$ showed fungal growth, slices in containers with $12\%\;CO_2+1\%\;O_2$ did not. Low ethylene in containers enhanced chilling injury. Modified atmosphere packaging provided good quality tomato slices with a shelf-life of 2 weeks or more at $5^{\circ}C$. Experiments were conducted to compare changes in quality of slices of red tomato (Lycopersicon esculentum Mill. 'Sunbeam') fruit from plants grown using black polyethylene or hairy vetch mulches under various foliar disease management systems including: no fungicide applications (NF), a disease forecasting model (Tom-Cast), and weekly fungicide applications (WF), during storage at $5^{\circ}C$ under a modified atmosphere. Slices were analyzed for firmness, soluble solids content (SSC), titratable acidity (TA), pH, electrolyte leakage, fungi, yeasts, and chilling injury. With both NF and Tom-Cast fungicide treatments, slices from tomato fruit grown with hairy vetch (Vicia villosa Roth) mulch were firmer than those from tomato fruit grown with black polyethylene mulch after 12 days storage. Ethylene production of slices from fruit grown using hairy vetch mulch under Tom-Cast was about 1.5- and 5-fold higher than that of slices from WF and NF fungicide treatments after 12 days, respectively. The percentage of water-soaked areas (chilling injury) for slices from tomato fruit grown using black polyethylene mulch under NF was over 7-fold that of slices from tomato fruit grown using hairy vetch under Tom-Cast. When stored at $20^{\circ}C$, slices from light-red tomato fruit grown with black polyethylene or hairy vetch mulches both showed a rapid increase in electrolyte leakage beginning 6 hours after slicing. However, slices from tomato fruit grown using the hairy vetch mulch tended to have lower electrolyte leakage than those grown with black polyethylene mulch. These results suggest that tomato fruit from plants grown using hairy vetch mulch may be more suitable for fresh-cut slices than those grown using black polyethylene mulch. Also, use of the disease forecasting model Tom-Cast, which can result in lower fungicide application than is currently used commercially, resulted in high quality fruit for fresh-cut processing. Experiments were conducted to determine if ethylene influences chilling injury, as measured by percentage of slices exhibiting water-soaked areas in fresh-cut tomato slices of 'Mountain Pride' and 'Sunbeam' tomato (Lycopersicon esculentum Mill.). Ethylene concentration in containers without ventilation significantly increased during storage at $5^{\circ}C$, whereas little or no accumulation of ethylene occurred in containers with one or six perforations. Chilling injury was greatest for slices in containers with six perforations, compared to slices in containers with one perforation, and was over 13-fold greater than that of slices in control containers with no perforations. An experiment was also performed to investigate the effectiveness of including an ethylene absorbent pad in containers on subsequent ethylene accumulation and chilling injury. While ethylene in the no-pad controls increased continually during storage of both 'Mountain Pride' and 'Sunbeam' tomatoes at $5^{\circ}C$ under modified atmosphere conditions, no increase in accumulation of ethylene was observed in containers containing ethylene absorbent pads throughout storage. The ethylene absorbent pad treatment resulted in a significantly higher percentage of chilling injury compared with the no-pad control. In studies aimed at inhibiting ethylene production using AVG during storage of slices, the concentration of ethylene in control containers (no AVG) remained at elevated levels throughout storage, compared to containers with slices treated with AVG. Chilling injury in slices treated with AVG was 5-fold greater than that of controls. Further, we tested the effect of ethylene pretreatment of slices on subsequent slice shelf-life and quality. In slices treated with ethylene (0, 0.1, 1, or $10\;{mu}L\;L^{-1}$) immediately after slicing, ethylene production in non-treated controls was greater than that of all other ethylene pre-treatments. However, pretreatment of slices 3 days after slicing resulted in a different pattern of ethylene production during storage. Ihe rate of ethylene production by slices treated with 1 L $L^{-1}$ ethylene 3 days after slicing was greater during storage than any of the other ethylene treatments. With slices pre-treated with ethylene, both immediately and 3 days after slicing, the rate of ethylene production tended to show an negative correlation with chilling injury. Chemical name used: 1-aminoethoxyvinylglycine (AVG).

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• 제21권4호
• /
• pp.181-186
• /
• 2011

Thermal stability of the $TiO_2$ SCR catalyst with W03 loading was investigated in terms of structural and morphological analyses. The $TiO_2$ catalysts with 10 w% $WO_3$ content and without $WO_3$ were prepared. which were heat-treated at $800^{\circ}C$ for 5 h. It was found that the catalytic acidity was decreased by thermal degradation in the $WO_3-TiO_2$ specimen that relatively less than the $TiO_2$ specimen from FT-IR analysis. The phase transition of the $TiO_2$ catalyst from anatase to rutile was increased by heal-treatment, and the percentage of the rutile phase was 28.4 % in the $WO_3-TiO_2$ and 22.9 % in the $TiO_2$. A shell region of $WO_3$ distinguished from a $TiO_2$ particle was also observed in the grain boundary region, and the $WO_3$ led to the suppression of grain growth. It could be confirmed that the suppression of grain growth can contribute to the improvement of catalytic properties for thermal stability more than the increase of anatase-rutile phase transformation which cause the reduction of the catalytic activity in the $TiO_2$ SCR catalyst by the presence of $WO_3$.

• Journal of the Korea Convergence Society
• /
• 제11권11호
• /
• pp.321-335
• /
• 2020

Given that with the development of the 4th industry, interest and desire for smart cities are gradually increasing and related technologies are developed as a way to strengthen urban competitiveness by utilizing big data, information and communication technology, IoT, M2M, and AI, the purpose of this study is to find out how to achieve this goal on the premise of the idea of smart well fair city. In other words, the purpose is to devise a smart well-fair city in the care area, such as health care, medical care, and welfare, and see if it is feasible. With this recognition, the paper aimed to review the concept and scope of smart city, the discussions that have been made so far and the issues or limitations on its connection to social security and social welfare, and based on it, come up with the concept of welfare city. As a method of realizing the smart welfare city, the paper reviewed characteristics and features of a social security platform as well as the applicability of smart city, especially care services. Furthermore, the paper developed discussions on the standardization of the city in terms of political and institutional improvements, utilization of personal information and public data as well as ways of institutional improvement centering on social security information system. This paper highlights the importance of implementing the digitally based community care and smart welfare city that our society is seeking to achieve. With regard to the social security platform based on behavioral design and the 7 principles(6W1H method), the present paper has the limitation of dealing only with smart cities in the fields of healthcare, medicine, and welfare. Therefore, further studies are needed to investigate the effects of smart cities in other fields and to consider the application and utilization of technologies in various aspects and the corresponding impact on our society. It is expected that this paper will suggest the future course and vision not only for smart cities but also for the social security and welfare system and thereby make some contribution to improving the quality of people's lives through the requisite adjustments made in each relevant field.

• Journal of the Korean Society of Food Science and Nutrition
• /
• 제39권4호
• /
• pp.602-612
• /
• 2010

This study was conducted to investigate the state of hygiene education aimed for by bakers, and the evaluations of the importance and the performance concerning sanitary characteristics by the bakers. The questionnaires were administered to 186 bakers in Busan and the data evaluated by 5 scales method of Likert were statistically analyzed. 20.4% of bakers have not received hygiene education. Only 32.8% of bakers have experienced hygiene education regularly. The more the bakers were educated, the more they practiced the contents of hygiene education. The major reason of education unfulfilment was due to insufficient equipments and facilities. The scores of the hygienic performance of educated bakers were significantly (p<0.05) higher than those of uneducated bakers in food sanitation, especially for sanitary characteristics on inspection, pre-preparation and distribution. The mean scores of the importance and the performance evaluated by bakers were 4.05/5.00 and 3.76/5.00, respectively. The bakers assessed the highest scores on the importance and the performance of personal hygiene. The gap score was -0.30 between the importance and the performance for sanitary characteristics. The baker recognized that sanitary management was not performed as much as they recognized its importance. The importance and the performance grid of bakers revealed that the items of checking the certification for the origin of new food ingredient, inspecting deliveries as quickly as possible, separation between preparing and breading time, thawing frozen food under running tap water/in refrigerator, separating disposal gloves and utensils by the purpose, putting products in cleaned and sterilized utensils, letting consumes know the expiration date of products, preventing a rubber hose from being left on the kitchen floor, checking insect nets frequently and so on showed lower scores compared to the mean scores of the importance and the performance. The levels of the hygienic performance by bakers were positively correlated (p<0.01) with the recognitions of the importance on sanitary characteristics. These results might provide basic data for hygienic training and play a role on the improvement of the sanitary management in bakery.

• Journal of The Korean Association For Science Education
• /
• 제38권4호
• /
• pp.467-480
• /
• 2018

This study aims to investigate how flipped learning-based socioscientific issue instruction (FL-SSI instruction) affected middle school students' key competencies and character development. Traditional classrooms are constrained in terms of time and resources for exploring the issues and making decision on SSI. To address these concerns, we designed and implemented an SSI instruction adopting flipped learning. Seventy-three 8th graders participated in an SSI program on four topics for over 12 class periods. Two questionnaires were used as a main data source to measure students' key competencies and character development before and after the SSI instruction. In addition, student responses and shared experience from focus group interviews after the instruction were collected and analyzed. The results indicate that the students significantly improved their key competencies and experienced character development after the SSI instruction. The students presented statistically significant improvement in the key competencies (i.e., collaboration, information and technology, critical thinking and problem-solving, and communication skills) and in two out of three factors in character and values as global citizens (social and moral compassion, and socio-scientific accountability). Interview data supports the quantitative results indicating that SSI instruction with a flipped learning strategy provided students in-depth and rich learning opportunities. The students responded that watching web-based videos prior to class enabled them to deeply understand the issue and actively engage in discussion and debate once class began. Furthermore, the resulting gains in available class time deriving from a flipped learning approach allowed the students to examine the issue from diverse perspectives.