• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3648-3658
• /
• 2023

The early localization of a fuel subassembly with a failed (wet rupture) fuel pin is very important in reactors to limit the associated radiological and operational consequences. This requires a fast and reliable system for failure detection and their localization in the core. In the Prototype Fast Breeder Reactor, the system specially designed for this purpose is Failed Fuel Location Modules (FFLM) housed in the control plug region. It identifies a failed sub-assembly by detecting the presence of delayed neutrons in the sodium from a failed sub-assembly. During the commissioning phase of PFBR, it is mandatory to demonstrate the FFLM effectiveness. The paper highlights the engineering and physics design aspects of FFLM and the integrated simulation towards its function demonstration with a source assembly containing a perforated metallic fuel pin. This test pin mimics a MOX pin of 1 cm² of geometrical defect area. At 10% power and 20% sodium flow rate, the counts rate in the BCCs of FFLM system range from 75 cps to 145 cps depending upon the position of DN source assembly. The model developed for the counts simulation is applicable to both metal and MOX pins with proper values of k-factor and escape coefficient.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.2 no.2
• /
• pp.81-89
• /
• 2001

Space systems are operating in a changing and uncertain space environment and are desired to have autonomous capability for long periods of time without frequent telecommunications from the ground station At the same time. requirements for new set of projects/systems calling for ""autonomous"" operations for long unattended periods of time are emerging. Since, by the nature of space systems, it is desired that they perform their mission flawlessly and also it is of extreme importance to have fault-tolerant sensor/actuator sub-systems for the purpose of validating science measurement data for the mission success. Technology innovations attendant on autonomous data validation and health monitoring are articulated for a growing class of autonomous operations of space systems. The greatest need is on focus research effort to the development of a new class of fault-tolerant space systems such as attitude actuators and sensors as well as validation of measurement data from scientific instruments. The characterization for the next step in evolving the existing control processes to an autonomous posture is to embed intelligence into actively control. modify parameters and select sensor/actuator subsystems based on statistical parameters of the measurement errors in real-time. This research focuses on the identification/demonstration of critical technology innovations that will be applied to Autonomous Spacecraft Health Monitoring/Data Validation Control Systems (ASHMDVCS). Systems (ASHMDVCS).

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.7
• /
• pp.1032-1038
• /
• 2017

Recently, regulation on carbon emissions has been strengthened according to the new climate change convention (COP21) held in Paris, and then Korea has decided to reduce CO2 emissions by 37% until 2030. As one of countermeasures, the government has energetically performed demonstration projects of island micro-grid including solar power, wind power and energy storage system. However, in order to smoothly introduce island micro-grid, it is a critical issue to carry out the economic evaluation for power utility aspect and independent power producer aspect. Therefore, this paper proposes economic evaluation algorithms of island micro-grid which are based on the present worth method, considering cost and benefit factors in the aspect of both sides. Firstly, in case of power utility this paper proposes algorithm to estimate a period of return on investment according to the introduction capacity of distributed generators replacing diesel generator. And also, in case of independent power producer, this paper proposes evaluation algorithm to estimate weighting factor of SMP and benefit rate based on break-even point related with cost and benefit. From a case study result on real island micro-grid model, it is confirmed that proposed algorithms are useful and practical for the economic evaluation of island micro-grid.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.23 no.4
• /
• pp.639-653
• /
• 2013

Smart grid is a network of computers and power infrastructure that monitor and manage energy usage efficiently. Recently, the smart grid demonstration projects around the world, including the United States, Europe, Japan, and the technology being developed. The protection of the many components of the grid against cyber-threats has always been critical, but the recent Smart grid has been threatened by a variety of cyber and physical attacks. We model and analyze advanced metering infrastructure(AMI) in smart grid. Using attack countermeasure tree(ACT) we show qualitative and probabilistic security analysis of AMI. We implement using SHARPE(Symbolic Hierarchical Automated Reliability and Performance Evaluator) tool and calculate probability, ROA, ROI, Structure Importance, Birnbaum Importance.

• Journal of Distribution Science
• /
• v.15 no.7
• /
• pp.5-17
• /
• 2017

Purpose - This study analyzes an economic effect on the project that Korean government supported for the vitalization of traditional markets using an input-output model. From 2002 to 2013, the government provided 180.8 billion won for a Management Modernization Project and 2.851 trillion won for a Facility Modernization Project for vitalization of traditional markets. Research design, data, and methodology - The present study conducted inter-industry analysis by matching industries related to the Traditional Market Project for the measurement, and calculated the ripple effect of each project. Result - The results from the study showed that from 2002 to 2012, the Management Modernization Project and Facility Modernization Project showed a 296.1 billion won effect on production inducement, a 158.7 billion won value-added inducement effect, and a 3,135-person effect on employment inducement in total. From 2002 to 2013, the Facility Modernization Project showed a 6.948 trillion won effect on production inducement, a 2.1109 trillion won effect on value-added inducement, and 40,209-person of effect on employment inducement in total. Conclusions - This study provided an empirical demonstration of a clear effect of the governmental support to traditional markets on developing regional economies. In particular, this study empirically analyzed and presented that there were a considerable amount of an economic effect by region due to governmental policy support to traditional markets.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.2
• /
• pp.252-261
• /
• 2014

A Bayesian network (BN) based fault diagnosis framework for semiconductor etching equipment is presented. Suggested framework contains data preprocessing, data synchronization, time series modeling, and BN inference, and the established BNs show the cause and effect relationship in the equipment module level. Statistically significant state variable identification (SVID) data of etch equipment are preselected using principal component analysis (PCA) and derivative dynamic time warping (DDTW) is employed for data synchronization. Elman's recurrent neural networks (ERNNs) for individual SVID parameters are constructed, and the predicted errors of ERNNs are then used for assigning prior conditional probability in BN inference of the fault diagnosis. For the demonstration of the proposed methodology, 300 mm etch equipment model is reconstructed in subsystem levels, and several fault diagnosis scenarios are considered. BNs for the equipment fault diagnosis consists of three layers of nodes, such as root cause (RC), module (M), and data parameter (DP), and the constructed BN illustrates how the observed fault is related with possible root causes. Four out of five different types of fault scenarios are successfully diagnosed with the proposed inference methodology.

• The Journal of Industrial Distribution & Business
• /
• v.9 no.8
• /
• pp.27-34
• /
• 2018

Purpose - This paper discussed and illustrated the most efficient method to calculate the distribution centers for a national project in China. Through demonstration of implementing the GIS, spatial analysis, and location calculation model, this paper mainly dealt with the construction distribution problem and inconvenient supply of materials problems. Research design, data, and methodology - In this paper, the research design structure based on three steps: implementing the Geographic Information System to locate the points coordination data, calculating the distribution centers of the project, and optimizing the most efficient and effective coordination. The data of the calculation is from an actual project. The methodology of this paper is summarizing the spatial analysis capabilities and digital graphic data calculation to locate logistics distribution centers, and since the illustration of the calculation is useful for locating the coordination, the result of this paper has certain reference values for the project construction. Results - This paper illustrates the steel and cement resource of every distribution point to confirm the most efficient distribution center location coordination. Conclusions - The integrated logistical management models are used to ensure the results for the purposes of our calculation. The result of the calculation is also a useful example for future Chinese national projects.

• Corrosion Science and Technology
• /
• v.12 no.4
• /
• pp.179-184
• /
• 2013

Pipe wall thinning caused by erosion and corrosion can adversely affect the operation of aged nuclear power plants. Some injured workers owing to pipe rupture has been reported and power reduction caused by unexpected pipe damage has been occurred consistently. Therefore, it is important to develop erosion-corrosion damage prediction model and investigate its mechanisms. Especially, liquid droplet impingement erosion(LDIE) is regarded as the main issue of pipe wall thinning management. To investigate LDIE mechanism with corrosion environment, we developed erosion-corrosion damage simulation apparatus and its capability has been verified through the preliminary damage experiment of 6061-Al alloy. The apparatus design has been based on ASTM standard test method, G73-10, that use high-speed rotator and enable to simulate water hammering and droplet impingement. The preliminary test results showed mass loss of 3.2% in conditions of peripheral speed of 110m/s, droplet size of 1mm-diameter, and accumulated time of 3 hours. In this study, the apparatus design revealed feasibility of LDIE damage simulation and provided possibility of accelerated erosion-corrosion damage test by controlling water chemistry.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.5
• /
• pp.1508-1516
• /
• 2016

This research intended to analyse the perception level of seafarers in order to propose enhancement of health management for seafarers and improvement of marine telemedicine assistance system. To this end, questionnaire survey was conducted for 422 seafarers in relation to current status of utilizing Emergency Medical Advice by radio(EMAR). By trading area, experience of benefiting EMAR by coastal seafarers was higher than that of ocean-going seafarers. By kinds of ships the rate of utilizing EMAR by fisherman was higher than that of seafarers of merchant ships. The level of satisfaction on the EMAR was 14.9% and regarded to be very low while the answering rate of necessity and urgency toward introducing marine telemedicine assistance system for the future through utilizing telemedicine equipment what is called U-helath including motion pictures information was very high. The answering rate of willingness to provide their personal health information positively when introducing marine telemedicine system was very high(97.4%). It is thus necessary to permit marine telemedicine service system, establish service model of marine telemedicine through conducting demonstration projects, promote marine telemedicine actively at the level of government, etc.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.173-176
• /
• 2010

A subscale gas generator was designed and manufactured to understand a reason for increased pressure drop of liquid oxygen injectors observed in a technology demonstration model of a 75 ton-class gas generator. A total of 6 hot-firing tests were successfully performed including experimental conditions of design and off-design points. The hot-firing results showed that discharge coefficients of fuel and liquid oxygen remained constant as the mixture ratio varied at a fixed chamber pressure. At a fixed mixture ratio, it was also found that discharge coefficients of fuel and liquid oxygen was constant as the chamber pressure was increased.