• Environmental Engineering Research
• /
• v.15 no.1
• /
• pp.29-33
• /
• 2010

In 2004, the Korean government launched comprehensive measures for nonpoint pollution that were intended to reduce their amount by 34.3% over of those forecast by 2020. During the first and second stages of their implementation; from 2004 to 2011, nonpoint source (NPS) measures have focused on systemic improvements and project management, as well as the introduction of optimal management techniques; accordingly, reductions have been small. However, during the third stage in 2011, serious reductions will be pursued. Accordingly, the gradual expansion of sites subject to NPS measures has focused on the establishment of a basis for reduction measures in connection with model projects during the first half of the plan, with full scale enforcement due in the second half. For Korea, rather than commencing NPS management en masse, it has been more appropriate to gradate NPS management into stages tailored to the different needs of new and existing businesses, as well as to the needs of large and small-scale businesses, in consideration of their specific circumstances. This has allowed sufficient time for such businesses to become accustomed to the concept of NPS management.

• Korean Journal of Remote Sensing
• /
• v.6 no.2
• /
• pp.115-133
• /
• 1990

Study was made on the spectral characteristics of rock samples including bentonites collected from the northern Ulsan area. The geology of the area consists mainly of sediments of the Kyongsang Series and Bulguksa granite, the Tertiary volcanics, andesites and tuffs. Relative reflectances of meshed samples(2.5~10mm) to BaSO$_4$ are measured at 6 Landsat TM spectral windows (excluding the thermal band) with HHRR, and their reflection charactristics were analysed. In addition, three different data selection schemes including the Eulidean distance, multiple regression, and PCA weight methods were applied to the 30 TM ratio channels, derived from the above 6 bands. The selected data sets were subject to two unsupervised classification techniques(FA and ISODATA) in order to compare the effectiveness for classification of particularly bentonite from others. As a result, in ISODATA analysis the multiple regression model shows the best, followed by the Euliean distances one. The PCA weight model seems to show some confusion. In FA, though difficult for quantitative analysis, the best still seems to be the regression model. Among ratio bands, rations of band 7 or 5 against other bands represent the best contribution in classification of bentonites from others.

• Journal of Korean society of Dental Hygiene
• /
• v.6 no.3
• /
• pp.229-242
• /
• 2006

This study was conducted to find out basic information on better customer satisfaction and service by examining and analyzing in what routes patients mostly have selected their dental medical organizations and how they have reacted to their dissatisfaction. The subject of study included the patients who have come to dental clinics and dental hospitals to be treated in Cheonan City, Chungnam and the researcher of this study used a survey and analyzed its gathered data using an SPSS(Statistical Package for the Social Science) WIN 11.5 Program. As analysis methods, frequency and percentage were calculated to figure out the general characteristics of its subject. In addition, a ${\chi}^2$(Chi-square) test was performed to figure out the factors that patients have selected their dental medical organizations and the following results were obtained. 1. The largest number of patients selected their dental medical organizations by hearsay and more female and married patients selected them by hearsay than other patients, and there were significant differences(p<.05). 2. The dental patients put the priority on treatment techniques in their visiting hospitals and the patients who were more than 40 years old and married patients put more emphasis on treatment techniques in their visiting hospitals than other patients and there were significant differences(p<.05). 3. The said dental patients were not satisfied with the kindness of medical staffs in their visiting medical organizations; meanwhile, the patients who were aged below 30 and had an academic background of more than university degree and were unmarried were less satisfied with the kindness of medical staffs in their visiting medical organizations than other patients and there were significant differences(p<.05). 4. In terms of improvement methods or complaints, the largest number of them said that they just ignored and endured; meanwhile, the patients who were aged below 30 and had an education of more than university degree and were unmarried were more patient of improvement methods or complaints than other patients and there were significant differences(p<.05). 5. There were more patients who have introduced their visiting medical organizations to their neighboring people than the patients who have not done it; in the meantime, the patients who were aged over 40 and were married have introduced their visiting medical organizations to their neighboring people more than other patients(p<.05).

• Journal of Distribution Science
• /
• v.13 no.9
• /
• pp.103-112
• /
• 2015

Purpose - This paper aims to provide a step-by-step approach to factor analytic procedures, such as principal component analysis (PCA) and exploratory factor analysis (EFA), and to offer a guideline for factor analysis. Authors have argued that the results of PCA and EFA are substantially similar. Additionally, they assert that PCA is a more appropriate technique for factor analysis because PCA produces easily interpreted results that are likely to be the basis of better decisions. For these reasons, many researchers have used PCA as a technique instead of EFA. However, these techniques are clearly different. PCA should be used for data reduction. On the other hand, EFA has been tailored to identify any underlying factor structure, a set of measured variables that cause the manifest variables to covary. Thus, it is needed for a guideline and for procedures to use in factor analysis. To date, however, these two techniques have been indiscriminately misused. Research design, data, and methodology - This research conducted a literature review. For this, we summarized the meaningful and consistent arguments and drew up guidelines and suggested procedures for rigorous EFA. Results - PCA can be used instead of common factor analysis when all measured variables have high communality. However, common factor analysis is recommended for EFA. First, researchers should evaluate the sample size and check for sampling adequacy before conducting factor analysis. If these conditions are not satisfied, then the next steps cannot be followed. Sample size must be at least 100 with communality above 0.5 and a minimum subject to item ratio of at least 5:1, with a minimum of five items in EFA. Next, Bartlett's sphericity test and the Kaiser-Mayer-Olkin (KMO) measure should be assessed for sampling adequacy. The chi-square value for Bartlett's test should be significant. In addition, a KMO of more than 0.8 is recommended. The next step is to conduct a factor analysis. The analysis is composed of three stages. The first stage determines a rotation technique. Generally, ML or PAF will suggest to researchers the best results. Selection of one of the two techniques heavily hinges on data normality. ML requires normally distributed data; on the other hand, PAF does not. The second step is associated with determining the number of factors to retain in the EFA. The best way to determine the number of factors to retain is to apply three methods including eigenvalues greater than 1.0, the scree plot test, and the variance extracted. The last step is to select one of two rotation methods: orthogonal or oblique. If the research suggests some variables that are correlated to each other, then the oblique method should be selected for factor rotation because the method assumes all factors are correlated in the research. If not, the orthogonal method is possible for factor rotation. Conclusions - Recommendations are offered for the best factor analytic practice for empirical research.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.11
• /
• pp.1309-1321
• /
• 2011

Clothes for a 3 to 6 year-old toddler should be made in consideration of their behavioral characteristics since it is when the physical ability of toddlers has rapidly developed and their social, emotional, and cognitive development are increasingly active. Indoor clothes are the item that consumers prefer because they provide the function of outside underwear when functioning as outerwear when indoors that is used frequently for toddlers. We analyzed the wearing condition and the uncomfortable aspects of toddler's clothes worn indoors through consumer surveys of toddler wear. This study gathers data for the development of indoor clothing that is useful for 3-6 year old toddlers. Consumer surveys indicate that the clothes most worn indoors were underwear (69.4%). The most important aspect in the selection of indoor clothes was the suitability for activities (29%). The preferred colors for indoor clothes were found to be pastel-tone colors (66%). Regarding the uncomfortable aspects of indoor clothes, knees of the clothes (36.8%) have the most naps and the breast of the clothes (37.8%) dirty quickly. Knee parts (35.4%) become worn easily; in addition, the material for the knee area is likely to have naps and require special functions. In conclusion, designing toddler clothing requires elaborated design techniques that consider the characteristics of the subject group and reduce inconveniences. This study will serve as preliminary data to develop ultimate products that have the functionality to meet gender behavior characteristics and the aesthetics for toddlers 3 to 6 years of age.

• Journal of Korean Society on Water Environment
• /
• v.39 no.5
• /
• pp.377-389
• /
• 2023

Chungcheongnam-do has been measuring the flow rate and water quality of streams in the province once a month since 2011 in order to water environment policies. Based on the results, after evaluating the coefficient of variation and the tendency of the water quality trend by using the Mann-Kendall test and Sen's Slope for each stream, the streams subject to priority introduction of Total Pollution Load Management at Tributaries were selected through the Stream Grouping Method. The water quality trend analysis results for 125 streams using the Mann-Kendall test and Sen's Slope were evaluated as streams showing a tendency of deteriorating water quality Biochemical oxygen demand (BOD): 13 streams, Total Phosphorus (T-P): 16 streams). Streams with deteriorating water quality were classified into A-D groups using the Stream Grouping Method. Group A, which has a high flow rate and high water quality, is a stream that requires priority management, and was selected as a stream for introduction of Total Pollution Load Management at Tributaries. There are 7 streams that need to be introduced into the BOD category, and there are 7 streams that need to be introduced into the T-P category. In this study, based on flow and water quality monitoring data accumulated over a long period of time (2011-2022), statistical techniques are used to select watersheds in which water quality is deteriorating. Accordingly, it is expected that it will be useful in establishing a water quality improvement plan in the future.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.6
• /
• pp.138-149
• /
• 2015

In order to search for the reasonable planning directions for representing traditional landscape, this study conducted the comparative analysis of the designs on the panels and their constructions from both winners of "The Landscape Design Competitions for City Infrastructure of Minlak(2) District in Uijeongbu" and "The Design Competition for Dongtan(2) District Land Development Phase 1". The representing targets and views, the composition and placement of representing space, the design of representing facilities and landscape planting were examined based on the text, master plans, elevations and cross sections, diagrams, images, and perspective drawings proposed from the competition panels. Then, the landscape constructions were reviewed. The results are as follows: First, the types of the representing targets and views are the agricultural landscape, as the local landscape of target area, which are divided into the life space of a traditional village, the traditional water space, and the traditional culture. Second, as to the composition and placement of representing space, the traditional theme spaces are formulated considering the surrounding land use and the local cultural heritage. However, some spaces were changed to the exercise space or convenient facility spaces required in a neighborhood park. Third, in the case of the representing facilities, a round island in the square pond, a traditional pavilion and Hwagye(terraced flower bed) were made without the facilities designed creatively. Fourth, the application of traditional planting techniques was focused on planting trees in the village forest on an island in the square pond and on Hwagye. Fifth, the traditional representing work has gradually advanced with the selection of subject and experimental facility designs based on the professional references. Sixth, the choice of the realizable subject, the expertise for information analysis and the creative design of the traditional facility are required in the future.

• Journal of the Korea Society for Simulation
• /
• v.32 no.1
• /
• pp.1-11
• /
• 2023

Smart factory environments and digital twin environments are established, and today's factories accumulate vast amounts of production data and are managed in real time as visualized results suitable for user convenience. Production simulation techniques are in the spotlight as a way to prevent delays in delivery and predict factory volatility in situations where production schedule planning becomes difficult due to the diversification of production products. With the development of the digital twin environment, new packages are developed and functions of existing packages are updated, making it difficult for users to make decisions on which packages to use to develop simulations. Therefore, in this study, the concept of Discrete Event Simulation (DES) performed based on discrete events is defined, and the characteristics of various simulation packages were compared and analyzed. To this end, studies that solved real problems using discrete event simulation software for 10 years were analyzed, and three types of software used by the majority were identified. In addition, each package was classified by simulation technique, type of industry, subject of simulation, country of use, etc., and analysis results on the characteristics and usage of DES software were provided. The results of this study provide a basis for selection to companies and users who have difficulty in selecting discrete event simulation package in the future, and it is judged that they will be used as basic data.

• Archives of design research
• /
• v.13 no.1
• /
• pp.209-218
• /
• 2000

The purpose of this study was to improve the curriculum for industrial design department in the junior colleges. In order to achieve the purpose, two methodologies were carried out. First is job analysis of the industrial designers who have worked in the small & medium manufacturing companies, second is survey for the opinions of professors in the junior colleges. Some results were as follows: 1. The period of junior college for industrial designers is 2 years according to present. But selectively 1 year of advanced course can be established. 2. The practice subjects same as computational formative techniques needed to product development have to be increased. In addition kinds of selection subjects same as foreign language, manufacturing process, new product information and consumer behavior investigation have to be extended. 3. The next subjects need to adjust the title, contents and hours. (1) The need of 3.D related subjects same as computer modeling, computer rendering, 3.D modeling was high. The use of computer is required to design presentation subjects. (2)The need of advertising and sale related subjects same as printing, merchandise, package, typography, photography was low, the need of presentation techniques of new product development was high. (3) The need of field practice, special lecture on practice and reading original texts related subjects was same as at present, but these are not attached importance to form. As the designers feel keenly the necessity of using foreign language, the need of language subject was high.

• Journal of KIISE:Software and Applications
• /
• v.31 no.10
• /
• pp.1332-1344
• /
• 2004

Upon development of information super-highway and multimedia-related technoiogies in recent years, more efficient technologies to transmit, store and retrieve the multimedia data are required. Among such technologies, firstly, it is common that the semantic-based image retrieval is annotated separately in order to give certain meanings to the image data and the low-level property information that include information about color, texture, and shape Despite the fact that the semantic-based information retrieval has been made by utilizing such vocabulary dictionary as the key words that given, however it brings about a problem that has not yet freed from the limit of the existing keyword-based text information retrieval. The second problem is that it reveals a decreased retrieval performance in the content-based image retrieval system, and is difficult to separate the object from the image that has complex background, and also is difficult to extract an area due to excessive division of those regions. Further, it is difficult to separate the objects from the image that possesses multiple objects in complex scene. To solve the problems, in this paper, I established a content-based retrieval system that can be processed in 5 different steps. The most critical process of those 5 steps is that among RGB images, the one that has the largest and the smallest background are to be extracted. Particularly. I propose the method that extracts the subject as well as the background by using an Image, which has the largest background. Also, to solve the second problem, I propose the method in which multiple objects are separated using RGB channel selection techniques having optimized the excessive division of area by utilizing Watermerge's threshold value with the object separation using the method of RGB channels separation. The tests proved that the methods proposed by me were superior to the existing methods in terms of retrieval performances insomuch as to replace those methods that developed for the purpose of retrieving those complex objects that used to be difficult to retrieve up until now.