• Tunnel and Underground Space
• /
• v.25 no.2
• /
• pp.125-132
• /
• 2015

As for noise and vibration occurring due to construction near fish farms, engineering and the technical opinions of experts in different areas were excluded in calculating any damage. The victims tend to present only biological consulting-based opinions while construction companies tend to present information on general construction noise and vibration as they have little biological knowledge on fish. So, the National Environmental Dispute Medication Commission presented specific damage standard in 2009 through studies on standard in calculating compensation and damage assessment of farm-raised fish that were affected by noise and vibration. Currently, 140 dB re $1{\mu}Pa$ is accepted as damage standard of underwater noise in the country. This standard is the RMS value of continuous sounds for more than a second, not the impulsive sounds. To look up the data on existing studies, fish showed different reactions to underwater sounds according to the different kinds of fish such as ostariophysan or non-ostariophysan, and pinnipeds or non-pinnipeds. So, this study will present damage standards for impulsive sounds in consideration of the differences in the characteristics of the impulsive and continuous sounds.

• Journal of Information Management
• /
• v.37 no.2
• /
• pp.1-20
• /
• 2006

It has lately been recognized that the sharing and exchanging of the research results information is the critical factor to improve the research productivity. So many institutions are planning or developing the information systems which provide the research information services for researcher. But it has very difficulty in integrating the research resources information due to the dispersion and heterogeneity in data sources, and semantic and structural difference in describing data. We propose the semantic web based methodology and conceptual framework for raising the interoperability of metadata about research results information, which will support the integration of the distributed research data for information services in the end. We first introduce the ontology which is developed based on Standard Metadata of Research Results Information published by STISC. Then to show the applicability in real-world environment, we express the metadata of research information in RDF/RDFS according to ontology. Finally we proposed the conceptual architecture of research information service system which shows the main components, the functional requirements, and the principal and design direction at implementing the system.

• Korean Journal of Food Science and Technology
• /
• v.20 no.4
• /
• pp.585-593
• /
• 1988

The lipid contents and neutral lipid components of brown rice, milled rice and bran were studied for four varieties of rice such as Nampung, Milyang #23, Whasung and Jinhung. Total lipid contents of brown rice, milled rice and bran were 2.65%, 1.09% and 20.24% respectively. The ratios of neutral lipids, glycolipids and phospholipids in total lipids were 82.53:12.39:4.08 in brown rice and 87.72:7.02:5.26 in bran. Neutral lipids were separated on the TLC; among them 6 neutral lipids were identified by comparing the RF value of standards. Triglycerides(TG), free fatty acids(FFA) and steryl esters(SE) were major neutral lipid components in brown rice, milled rice and bran. TG content of the bran, compared to that of brown rice and milled rice, was very low in contrast the FFA content was high. The major fatty acids of total lipid and neutral lipid fractions were palmitic, linoleic and oleic acids, comprising over 95% of these classes.

• Child Health Nursing Research
• /
• v.19 no.2
• /
• pp.120-129
• /
• 2013

Purpose: Parents with a premature infant are usually confronted with difficulties in caring for their babies and need education on appropriate care. The purpose of this paper was to describe the components of caring education for parents with a premature infant based on an integrative literature review and to present strategies for future education. Methods: Four electronic databases were searched to identify studies. Sixteen articles were selected through full text screening of related research published in domestic journals from January 1990 to October 2012. Results: Through in-depth discussion and investigation of the relevant literature, three components emerged; (a) nurses as educators and parents as learners, (b) education content including caring on admission or discharge, and effects of education, and (c) education environment including timing, place and materials. Conclusion: Future education on caring for premature infant should include the nurse as educator and have diverse content including parent's role, interaction with healthcare providers, and special care for premature infants with special problems. Moreover, highly technical teaching materials should be provided, along with continuous support of institution and government to individual caregivers. Results of this study provide comprehensive prospective and basic standards for education on premature infant care.

• Spatial Information Research
• /
• v.12 no.4 s.31
• /
• pp.299-305
• /
• 2004

According to the facility of effective search and user-friendly access to various spatial data by building GIS, the demand for application of information and social effect has been increased. To meet such domestic demands, it has become necessary to develop local, regional, and global SDI(Spatial Data Infrastructure) which can support discovery, access, and use of spatial information in the decision-making process. Many developed countries are implementing and managing GSDI in accordance with their state and purpose. There are two typical international cases; U.S. Geospatial One-Stop and European Geo-Portal. These systems are observed the international standards so they provide standardization and interoperability of GI. In domestic cases, however, each sector is managing separately geospatial data management systems. From this point of view, this paper proposed implementation approaches of GOS that can provide interchange of geospatial information between supplier and user. This paper focused on standardization, considered technical and political factors and analyzed two cases of GOS such as U.S. and Europe cases into our spatial information environments. It is possible to search and access geospatial data effectively by introducing GOS. In addition, it is possible to promote popularization of geospatial information and development of GIS industy.

• Journal of the Korean Society for Railway
• /
• v.19 no.1
• /
• pp.29-37
• /
• 2016

The type approval system of the railway safety law, which was enforced in 2014, has been preferentially applied to the field of railway vehicles. The type approval system addresses railway vehicles and railway constituents. Unlike the previous system, it requires serial verification stages divided, in consecutive order, into verification of design compatibility and conformity and type test. These stages are in accord with international certification systems including TSI certification of the European commission. This study has been carried out to find and meet the design requirements for a coupler head, which is a part of the automatic coupler system; requirements were drawn from TSI and technical specifications that are subordinate to the domestic railway approval system. Through this study, it has been found that there exist 34 design requirements to acquire a complete coupler head. Among those requirements, 32 were verified by document inspection and two were able to be verified by performing FEA and gathering range analysis data.

• Journal of Convergence Society for SMB
• /
• v.3 no.2
• /
• pp.27-32
• /
• 2013

Wireless Body Area Networks (WBAN) have been made possible by the emergence of small and lightweight wireless systems such as Bluetooth, enabled devices and PDAs. Antennas are an essential part of any WBAN system and due to various technical requirements and physical constraints, careful consideration of their design and deployment is needed. This paper is proposing on the design of wearable antenna as parts of clothing to serve communications functions, such as tracking and navigation in health care applications. The substrates of the wearable antennas will be made from textile materials and since it is wearable, it should have a small size, be light weight, low maintenance, and unobtrusive. This proposed paper will also investigate the influence of different parameters for wearable antenna including types of textile/substrate to ensure that the antenna design satisfies WBAN requirements. The characteristics and behavior of the antenna need to adhere to specifications set by wireless standards and system technology requirements. This means that the transmitting and receiving frequency bands of the various units need to be chosen accordingly. Since there are restrictions on the level of power to which the human body can be exposed to, the antenna as well as other RF system components must be designed to meet these restrictions. Antenna gain, which directly affects power transmitted, is a critical parameter in ensuring power levels fall within the safety guidelines and so will be of primary importance in the design. The electromagnetic interaction between WBAN antennas and devices and the human body will also be explored.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.3
• /
• pp.279-291
• /
• 2013

Objective: The aim of this study was to compare old standard EN 954-1 and new standard EN ISO 13849-1 through case study and provide necessity of adaptation of EN ISO 13849-1 in Korea. Background: International and EU harmonized standard EN ISO 13849 "safety of machinery - Safety-related parts of control system" is classified into Part 1: General principles for design and Part 2: Validation. EN ISO 13849-1 standard was introduced in Official Journal of the European Union on September 8, 2009 as harmonized standard, and old standard EN 954-1 was withdrawn on December 31, 2011. So, EU decided to use of EN ISO 13849-1 standard forcibly from January 1, 2012 for safety of machinery. New machines need to be CE marked if they are to be placed on the market in the European Economic Area(EEA), Switzerland or Turkey, and Korean machine builder should apply EN ISO 3849-1 standard for safety of machinery accordingly. However, current Korean Safety Certification system(KCs mark) for dangerous machinery is not referred to EN ISO 13849-1 standard as safety standard. There is a need of research for adaptation of EN ISO 13849-1 standard in Korea as safety standards for new design of safety-related control system which use mostly electronic components. Method: Five case studies of representative designs for safety-related control system in accordance with EN 954-1were selected according to safety category from B to 4. And these five representative designs were tried to change new design in accordance with EN ISO 13849-1 standard. The results of comparison were analyzed in aspect of economy and technical complexity. Results: The results showed that EN ISO 13849-1 provided quantitative method of application and it enabled designers to create safety-related control systems that require fewer components and less wiring, with many of the components being to a lower specification and, therefore, less costly. Conclusion: EN ISO 13849-1 standard is good for electronic safety-related control systems compare to EN 954-1. By considering the importance of application of EN ISO 13849-1 and benefits, the application of EN ISO 13849-1 as safety standard for safety of machinery is urgent in Korea. Application: The results of comparing EN 954-1 and EN ISO 13849-1 standard might help to determine the adaptation of EN ISO 13849-1 standard for safety of industrial machinery in Korea.

• International Commerce and Information Review
• /
• v.4 no.1
• /
• pp.107-128
• /
• 2002

In order to clarify the relationship between the Internet utilization of the Korean small export firms for export marketing and it's performance, first, a research model and hypothesis have been made on a theoretical basis. This research hypothesis has been examined through gathering survey data and a statistical analysis based on MANOVA. The conclusion, as well as the main point of this thesis, is that, in most cases, there was a significant statistical connection between the variables of export performances and Internet-utilized export marketing strategies, which are both based on the classical AIDA model of effective hierarchy of communication for sales and advertising. This conclusion brings forth a substantial topic as well as provides meaningful implications for the Korean small export firms when putting together a marketing strategy using the Internet. It is also hoped that this will come as a reference for other researchers henceforth. However, there is an issue of lack of representativeness when considering that the samples were chosen on the basis of the convenience sampling method. Another issue may be that a portion of the subjects were not related to actual trade, but were, in fact, Web masters who operated e-trade systems. Furthermore, there are also numerous problems of missing data, and 6 out of the 8 main hypotheses possessed the issue of fitness level with the data. Therefore, in order to enhance both the representative and fitness levels of the data of further research for this topic, future respondents will have to have special trade knowledge, as well as technical knowledge of e-trade. However, unless the Internet begins to greatly contribute to export marketing of corporations, this type of enterprising spirit by corporations in gathering suitable respondents will not surface. Although not used in examining the hypotheses of this particular thesis, the relationship between competitive and circumstantial variables, which were added to the upcoming survey, and export performances will soon be analyzed and announced in order to atone for some of the standards this thesis fell short of.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.3
• /
• pp.156-162
• /
• 2010

When eccentric or inclined load acts on foundation of the port & harbor structures, partial safety factors of bearing capacity limit state were estimated using reliability analysis. Current Korean technical standards of port and harbor structures recommend to estimate the geotechnical bearing capacity using the simplified Bishop method. In practice, however, simple method of comparing ground reaction resistance with allowable bearing capacity has been mostly used by design engineers. While the simple method gives just one number fixed but somewhat convenient, it could not consider the uncertainty of soil properties depending on site by site. Thus, in this paper, partial safety factors for each design variable were determined so that designers do perform reliability-based level 1 design for bearing capacity limit state. For these, reliability index and their sensitivities were gained throughout the first order reliability method(FORM), and the variability of the random variables was also considered. In order to verify partial safety factors determined here, a comparison with foreign design codes was carried out and were found to be reasonable in practical design.