• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.1
• /
• pp.39-45
• /
• 2014

Various approaches have been tried to reduce the emission of carbon dioxide in paper industry. One of important approaches is to use PCC manufactured from emission gas as a filler. However, it was recognized that PCC is inferior to other fillers in the paper strength properties of view. Therefore, pretreatment of PCC with pulp powder was tried to mitigate the strength reduction of paper. Pretreatment of PCC with pulp powder improved the bulk(7.4~12.9%) and air permeability(24.8~42.98%), but there is no significant change in opacity. Tensile index, burst index and stiffness were decreased by the use of pretreated PCC with pulp powder. Anionic and cationic PAM were used as a additive for PCC pretreatment in order to improve strength properties. There was no significant change in bulk in all kinds of PAM used in this study. Most strength properties were improved by the pretreatment of PCC with the anionic and cationic PAM and pulp powder, although the opacity and stiffness were more or less decreased.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.3
• /
• pp.5-13
• /
• 2016

This study investigated the effects of different factors on the migration of a fluorescent whitening agent (FWA) from paper treated with FWAs to non-fluorescent papers. FWA migration experiments were carried out in vertical and friction contacts between the papers dyed with FWAs and non-fluorescent papers. During the experiments, we identified the effects of the addition and types of FWAs, contact time, temperature, and relative humidity (RH) on FWA migration. The fluorescence indices of the non-fluorescent papers were measured before and after the migration experiments, and the Student's t test, a statistical tool, was utilized to compare results from different migration experiments. In vertical contact experiments, FWA migration to non-fluorescent paper was observed at $30^{\circ}C$ and 70% RH; this was attributed to the high moisture content of the paper. FWA migration did not occur significantly at $23^{\circ}C$ and 50% RH. In the friction contact experiments, FWA migrations were identified at both temperature conditions and RH percentages. The addition and types of FWAs did not increase the fluorescence index of non-fluorescent papers. Therefore, it was concluded that the moisture content of paper and the friction contact affected FWA migration from the papers containing internal and surface FWAs.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.4
• /
• pp.76-83
• /
• 1999

This study was carried to investigate optimum conditions of charcoal added paper in making cigarette filter for the removal of smoke contents of cigarettes. We investigated the physical properties of charcoal added paper according to the ratio of pulps, the amounts of characoal , the weight of sheets and crimping conditions in dry method, and then analyzed the smoke contents of cigarettes. The results obtained were as follows. 1. Sw-BKP was higher than Hw-BKP in methylene blue absorption by UV test. 2. Charcoal had an effect on stiffness for decreasing factor greatly , while the addition amounts of Sw-BKP and high weigth of sheets increased it, and the interaction of weight of sheets and charcoal was higher than other factors. 3. Tear index decreased by charcoal addition greatly, on the other hand high weight of sheets and Sw-BKP/Hw-BKP ratio increased ter, and the interaction of pulps and chacoal acted on major factors. 4. We estimated crimp index with sensory evaluation , and charcoal hand an effect on decreasing factor in crimping greatly, while the interaction of weight of sheets and pulp ratio was higher than others. 5. In the case of charcoal added paper filter, tar removal efficiency of smoke contents was higher but about 6% than cigarette filter. Especially vapour phase(aldehyde) in smoke contents was removed greatly.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.11a
• /
• pp.194-204
• /
• 1999

The use of genetically cloned xylanase acquired from Bacillus strearthermophillus improves bleachability for oak kraft pulps. Combination of xylanase(X). oxygen(O), ozone(Z). peroxide(P), alkaline extraction(Eo. Eop), and chlorination(C/D, D) have been tested in a variety of bleaching sequences. The effectiveness of xylanase pre-treatment(XO) and post-treatment(OX) in oxygen bleaching is mainly compared. With xylanase treatment the brightness increase by 1.5-2.1% ISO in OZEP, OZEoP, OZEopP and OPZP sequences. There is only numerically difference of brightness gains between OX and XO sequences. With xylanase treatment chemical requirements for bleaching decrease by 42.6-48.6% in OC/DEoD sequence and 47.9-54.7% as active chlorine in OC/DEopD sequence at the same brightness. the reduction of bleaching chemicals is higher in XO sequence than those in OX sequence. Following xylanase treatment the viscosity increases from 11.7-12.0 mPa·s to 12.4-13.5 mPa·s and the brightness stability is considerably improved however the difference of effectiveness between XO and OX sequence is not present. Compared to tensile index vs tear index, the physical properties are similar for TCF bleaching sequences with and without xylanase treatments. However in OC/DEoD and OC/DEopD sequences the physical properties decrease with xylanase treatment. There is no difference in the physical properties between XO and OX sequences. COD, BOD and color of bleaching effluents increase slightly with xylanase treatment, however the discharge of COD end-load into environmental impact decrease.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.04a
• /
• pp.169-169
• /
• 2011

Xylans are polysaccharides present in large amounts in cell walls of land plants. However, during kraft cooking, a high portion of hemicelluloses including xylans are dissolved in the cooking liquor. In the current trend for a more effective utilization of biomass, attention has been paid to the exploitation of xylans as strength-enhancing additives for paper. It is believed that surface xylan adds flexibility to the cell wall/fiber surface, resulting in stronger fiber-fiber joints or greater contact area between the fibers. Accordingly, there is proposal for a new pulping process involving the extraction of xylan prior to pulping, followed by their re-adsorption on the unbleached pulp. A suitable bleaching process should be employed then, which ought to does not only improve the brightness of the pulp, but also remain the effect of the adsorption of xylan on pulp fibers. The objective of this research was to investigate the impact of hydrogen peroxide bleaching on the properties of unbleached hardwood kraft pulp pretreated with birchwood xylan by measuring optical properties (brightness, post color number, opacity) as well as physical properties (tensile index, tearing index, bulk) of handsheets made from the bleached pulp. In the meantime, the influence of process variables of peroxide bleaching including bleaching temperature, time, initial pH and $MgSO_4$ dosage were studied.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.2 no.1
• /
• pp.49-54
• /
• 1973

In this paper, the effect of Ever-Fresh, a kind of preservatives for fish and shellfish, on fish and shrimp during ice storage were investigated. The results are as follows: 1. K value representing the ratio of optical densities of inosine and hypoxanthine fraction and total nucleotide fraction at 250nm could be useful as an index to measure the freshness of fish and shrimp during ice storage. 2. Volatile basic nitrogen could be also useful as an index to measure the freshness of shrimp during ice storage. 3. Ever-Fresh treatment of conger eel, half-beak, and shrimp appeared effective on keeping freshness during the early stage of ice storage. 4. Ever-Fresh treated shrimp showed lower thiobarbituric acid value as compared with the control during the early stage of ice storage.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.04b
• /
• pp.386-389
• /
• 1999

Amphoteric polymers have brought to papermakers' attention gradually. In this paper, a series of amphoteric starches with different cationic and anionic degree of substitution (DS) are prepared. Better product has been selected and used under different condition. As retention and drainage aids, amphoteric starches were used in shorter fiber length, weak strength and poor drainage bleached AQ-Soda wheat straw pulp. In neutral and alkaline papermaking system, when amphoteric starches contain 0.024-0.026 anionic degree of substitution (DS), it is shown that the higher the cationic degree of substitution (DS) in amphoteric starches, the better the filler retention. The filler retention is improved 12.5%, 30.3%, and 35.1% and 32.5% respectively by adding 1% amphoteric starch LS-L2 -1 (0.034), LS-L2-2 (0.040), LS-L2-3 (0.047) and LS-L2-4 (0.052). But the strength of handsheets if affected a little. By adding 2% Al2 (SO4)3 and 1.5% LS-L2-3 at pH 7.5, filler retention can be improved from 38% to 80%, and breaking length of sheet only decreases 3.2%. As dry strengthening aids, amphoteric starches were used in eucalyptus APMP. Amphoteric starches are used in eucalyptus APMP. The amphoteric starch LS-L2-2 is better dry strength aid. Adding 1% LS-L2-2 can improve breaking length 24.5%, burst index 42.9%, tear index 38.8%, folding endurance and density of the handsheets.

• Journal of the Korean Data and Information Science Society
• /
• v.28 no.2
• /
• pp.287-295
• /
• 2017

Since Google's AlphaGo defeated a world champion of Go players in 2016, there have been many interests in the deep learning. In the financial sector, a Robo-Advisor using deep learning gains a significant attention, which builds and manages portfolios of financial instruments for investors.In this paper, we have proposed the a deep learning algorithm geared toward identification and forecast of the KOSPI index direction,and we also have compared the accuracy of the prediction.In an application of forecasting the financial market index direction, we have shown that the Robo-Advisor using deep learning has a significant effect on finance industry. The Robo-Advisor collects a massive data such as earnings statements, news reports and regulatory filings, analyzes those and recommends investors how to view market trends and identify the best time to purchase financial assets. On the other hand, the Robo-Advisor allows businesses to learn more about their customers, develop better marketing strategies, increase sales and decrease costs.

• Journal of Korean Institute of Industrial Engineers
• /
• v.36 no.3
• /
• pp.186-192
• /
• 2010

The present study classified the auto-parts makers into four groups according to their investment ownership. Four groups consist the one fully owned by Koreans, the one fully owned by foreigners, the one owned less than 100% but more than 50% by foreigners, lastly the one owned by less than or equal to 50% by foreigners. Among these, the auto-parts makers, 100% foreign ownership, have the highest Malmquist productivity index while 100% Korean-owned part-makers has the lowest productivity. In case of the 100% foreign ownership companies, the cause of Malmquist change, however, is attributed to the technical efficiency change. In particular, the pure technical change is the main source of the Malmquist change. This may indicate that the 100% foreign-owned companies have successfully transferred their production process technologies to the Korean plants. They are enjoying so called the "imitation-effect." 100% Korean-owned companies were not able to create the "imitationeffect" and therefore failed to close the gap with the foreign-owned companies in terms of the production efficiency. 100% Korean-owned auto-parts makers, however, outperformed the foreign-owned companies in the technological change. The outstanding technological change may indicate that Korean-owned part makers were able to narrow the gap with the foreign-owned companies in the area of engineering technological capabilities. The same results were also observed for 50% foreign-owned companies. Knowing that the core competence of the auto-parts makers lies on the engineering technological capabilities, the research found that the most desirable form of the foreign investment was 50% of foreign ownership.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.6066-6075
• /
• 2014

The aim of this study was to analyze the productivity changes in government-funded research institutes for Economics & Humanities and Social Sciences. From Malmquist total factor productivity index analysis, the average productivity decreased 6.5% between 2006 and 2010. Further analysis showed that technical efficiency increased 4.7% annually while the technology change rate decreased 10.8% on average. Under pressure for innovation from the outside, research institutes responded to managerial efficiency improvement, which lead to increases in technical efficiency. On the other hand, for productivity improvement of government funded research institutes, they must pursue technological advances by securing an outstanding research workforce, expanding the R&D budget, and changing the R&D method. Each institute must perceive the cause of an individual institute's productivity change, and establish strategies for increasing productivity.