• 한국의류학회지
• /
• 제41권4호
• /
• pp.633-645
• /
• 2017

This study examined the effects of the number of Dakji layer (a layer, two layers), the time of Jumchichigi (20, 40 and 60 minutes) and the type of Choji method making Dakji (Oebal-teugi, Ssangbal-teugi) on five strength properties of Jumchi-Hanji. As a result, the number of Dakji layer and the time of Jumchichigi influenced the five strength properties (tensile, wet tensile, tearing, bursting, and folding strengths). Jumchi-Hanjis made with two layers of Dakijis had higher properties than Jumchi-Hanjis with a layer of Dakji in the strength properties. The more the time for Jumchichigi is spent, the more the five strength properties of Jumchi-Hanji increased. The type of Choji was related to only three strength properties. The tearing strength of Jumchi-Hanjis with one and two layers, and the wet tensile and the folding strengths of Jumchi-Hanjis with two layers depended on the type of Choji. The differences of Jumchi-Hanji and Dakji were also identified in the strength properties. All Jumchi-Hanjis had low tensile and wet tensile strengths when compared to Dakjis. However, Jumchi-Hanjis, made by sixty minute Jumchchigi, had generally higher tearing, bursting, and folding strengths than the Dakjis. In conclusion, the strength properties of Jumchi-Hanji could be improved by controlling the number of Dakji layers and the time of Jumchichigi.

• 한국의류학회지
• /
• 제26권10호
• /
• pp.1401-1411
• /
• 2002

To Save energy and cost one bath/one step dyeing and finishing on cotton/polyester blends is carried out with disperse dyes in the presence of crosslinking agent. Cotton 100 %, cotton/polyester 70/30, 50/50, 35/65, polyester 100 % fabrics were used. wrinkle recovery angle, tensile strength retention and tearing strength retention were determined in according to the dyebath composition, and also determined while the concentration of DMDHEU, molecular weight and concentration of PEG were varied. Colorfastness to abrasion, washing and light were tested. For cotton and cotton/polyester blends dyed in the presence of DMDHEU/PEG, wrinkle recovery was improved. Tensile strength retention and tearing strength retention were decreased, in compared with dyed fabrics without DMDHEU. Colorfastness to abrasion was good but colorfastness to washing and to light were poor for the fabrics dyed in the presence of DMDHEU/PEG.

• 한국의류산업학회지
• /
• 제6권2호
• /
• pp.245-248
• /
• 2004

This study examied ned physical properties and surface characteristics of papers post-processed by Jumchi technique and stainability of extract from Amur Cork-Tree to use Dakji as clothing material. Then, it found the following results. After-treatment by Amorphophalus konjac K. Koch and persimmon juice showed stronger tensile strength and tearing strength than untreated samples and the drape stiffness was substantially increased. After-treatment by persimmon juice generated dyeing effects as well as excellent tensile strength and tearing strength all samples were generally dyed well by Amur Cork-Tree, While the untreated samples did not show any significant effects in dyeing for more than 5 minutes. It was found that after-treatment substantially contributed on concentration of dyeing as dyeing amounts of post-processed samples were gradually increased as time increased. After-treated sample with agar did not show any significant differences from untreated sample. Accordingly, it has to be studied further.

• 한국의류학회지
• /
• 제42권2호
• /
• pp.224-236
• /
• 2018

This study analyzed differences between Jumchi-Hanji papers not dyed and dyed with persimmon juice (50% concentration) in five strength properties (tensile, wet tensile, tearing, bursting, and folding strengths). For the analysis, the undyed and the dyed Jumchi-Hanji papers were made by Jumchichigi during 40 minutes and made with the Dakji of different layer (a layer, two layers) and Choji method (Oebal-teugi, Ssangbal-teugi). Differences between Jumchi-Hanji papers dyed with the different concentration of persimmon juice (20% vs 70%) in the five strengths were also identified. For this examination, Jumchi-Hanji papers were made with two layer Dakji (Oebal-teugi Choji method) and by Jumchichigi during 60 minutes. Jumchi-Hanji papers made in this study were used as test samples. As a result, Jumchi-Hanji papers dyed with persimmon juice had higher tensile strength (CD), wet tensile strength (MD, CD), and bursting strength than those of undyed Jumchi-Hanji papers. However, tearing strengths (MD, CD) of dyed Jumchi-Hanji papers were lower than undyed Jumchi-Hanji papers. Folding strengths (CD) of dyed Jumchi-Hanji papers were low but the folding strengths (MD) of them were high compared to undyed Jumchi-Hanji papers. In addition, the concentration of persimmon juice influenced the five strength properties of Jumchi-Hanji. The tensile, wet tensile, and bursting strengths of Jumchi-Hanji papers dyed with a 70% concentration were higher than those one of Jumchi-Hanji papers dyed with a 30% concentration while the tearing and folding strengths of Jumchi-Hanji papers dyed with a 70% concentration were lower than Jumchi-Hanji papers dyed with a 30% concentration.

• Elastomers and Composites
• /
• 제1권1호
• /
• pp.41-48
• /
• 1966

The physical properties of rubber coated fabrics, treated by means of spreading and topping process were studied. 1. The tearing strength of the rubber coated fabrics has shown decreasing tendency in comparison with fabric itself 2. Generally, the tearing strength is inversely proportional to the adhesion. 3. The value of hydrostatic pressure is in proportion to the density and tensile strength of the fabrics. 4. The topping process shows greater difference in adhesion initial and after water immersion than spreading process.

• 공업화학
• /
• 제25권6호
• /
• pp.602-606
• /
• 2014

본 연구에서는 norbornene dialkyl ester 8종을 PVC에 적용하여 물리적 물성의 변화를 관찰하였다. PVC 시편은 PVC와 norbornene dialkyl ester, 안정제 등을 배합하여 제작하였고, 경도, 인장강도, 신율, 인열강도, 투과도, 투명도, 황변지수를 측정하여 DOP를 적용한 경우와 비교하였다. 경도는 dicyclohexyl-5-norbornene-2,3-dicarboxylate (DCHN)를 제외한 화합물 7종이 DOP와 동등 이상의 값을 나타내었다. DCHN을 적용한 경우 경도가 매우 높아 인장 특성 및 인열강도를 분석하지 못하였다. 인장 특성은 diisononyl-5-norbornene-2,3-dicarboxylate (DINN)을 제외한 6종의 화합물이 인장강도와 신율이 모두 개선되는 결과를 나타내었다. 인열강도와 투과도는 측정된 모든 화합물이 DOP를 적용한 경우와 동등 이상의 물성을 보였으며, 투명도는 DDN을 제외한 다른 norbornene 유도체들은 양호한 상태를 나타내었다. 황변지수에서는 DPN과 DON이 DOP와 유사한 결과를 나타내었다.

• 한국공간구조학회지
• /
• 제7권6호
• /
• pp.5-11
• /
• 2007

• 한국의류산업학회지
• /
• 제14권1호
• /
• pp.122-129
• /
• 2012

To develop a waterproof breathable material, we fabricated three kinds of nanofiber web laminates using a massproduced electrospun nanofiber web with different substrates and layer structures. The waterproofness and breathability of nanofiber web laminates were evaluated after repeated launderings and compared with those of conventional waterproof breathable fabrics currently in use, including densely woven fabric, microporous membrane laminated fabric, and coated fabric. The durability of nanofiber web laminates, including adhesion strength, abrasion resistance, tensile strength, and tearing strength, was also assessed and compared with those of conventional waterproof breathable fabrics. The water vapor transmission of nanofiber web laminates increased slightly after repeated launderings, whereas the air permeability somewhat decreased after launderings but still maintained an acceptable level of air permeability. Laundering reduced the resistance to water penetration of nanofiber web laminates, which implies that laminating techniques or substrate materials that could support waterproofness of the laminated structure should be explored. The adhesion strength, abrasion resistance, tensile strength, and tearing strength of nanofiber web laminates were in a range comparable to conventional waterproof breathable materials.

• 한국의류학회지
• /
• 제13권3호
• /
• pp.242-251
• /
• 1989

The purpose of this study was to investigate the changes in easy-care and strength properties of the wet fixation processed viscose rayon fabrics. Rayon fabrics were treated with mixed resins of melamine formaldehyde (MF) and DMDHEU by one bath and two bath wet fixation processes. The MF/DMDHEU mixed resin concentrations were 50/100, 50/150, 100/100, 100/150 and 150/100(g/1). Magnasium chloride was used as a catalyst. Treated fabrics were evaluated by nitrogen content, DP rating, wrinkle recovery angle, breaking strength, tearing strength and abrasion resistance. The properties were compared to the fabrics treated by conventional Pad-Dry-Cure (PDC) method. Wet fixation processed fabrics showed DP ratings of higher than 3 and higher than 275 degrees of wrinkle recovery angles in all the mixed resin concentrations. Wet fixation processed fabrics showed increase in breaking strength and tearing strength but decrease in abrasion resistance. However, the decrease in abrasion resistance was much less than the conventional PDC treated fabrics. The one bath wet fixation processed fabrics showed better physical properties than the two bath processed fabrics in general. The optimum treatment condition was the mixed resin concentration of MF/DMDHEU, 100/100 g/l in one bath wet fixation process.

• 대한기계학회논문집A
• /
• 제24권3호
• /
• pp.710-717
• /
• 2000

Tensile and fracture toughness tests of the cold-rolled STS 304 steel plate for membrane material of LNG storage tank were performed at wide range of temperatures, 11 IK(boiling point of LNG), 153K , 193K and 293K(room temperature). Tensile strength significantly increases with a decrease in temperature, but the yield strength is relatively insensitive to temperature. Elongation at 193K abruptly decreases by 50% of that at 293K, and then decreases slightly in the temperature range of 193K to 111K. Strain hardening exponents at low temperatures are about four times as high as that at 293K. Elastic-plastic fracture toughness($J_c$) and tearing modulus($T_{mat}$) tend to decrease with a decrease in temperature. The $J_c$ values are inversely related to effective yield strength in the temperature range of 111K to 293K. These phenomena result from a significant increase in the amount of transformed martensite in low temperature regions.