• 한국컴퓨터정보학회논문지
• /
• 제28권12호
• /
• pp.89-96
• /
• 2023

본 논문에서는 GPU기반으로 옷감을 찢는 데 필요한 동적 재메싱를 실시간으로 처리할 수 있는 방법을 제안한다. 얇은 쉘 재질은 물리 기반 시뮬레이션/애니메이션, 게임, 가상현실 등 다양한 분야에서 활용되고 있다. 옷감을 찢는 것은 기하학과 연결 구조를 동적으로 갱신해야 되기 때문에 그 처리 과정이 복잡하고 계산양이 크다. 특히 인터랙티브 콘텐츠를 다루는 분야에서는 이 과정이 빠르게 수행되어야 한다. 대부분의 방법에서는 실시간을 유지하기 위해 저해상도 시뮬레이션을 통해 재메싱을 수행하거나 이미 분할된 패턴을 그대로 이용하기 때문에 동적 재메싱이라고 보기 어려우며, 찢어진 패턴의 품질이 낮다. 본 논문에서는 GPU에 최적화된 동적 재메싱 알고리즘을 새롭게 제안함으로써 고해상도 옷감 찢어짐을 실시간으로 처리할 수 있게 한다. 본 논문에서 제안하는 방법은 사전에 쪼개진 메쉬 형태가 아닌 동적 재메싱이 가능하기 때문에 가상 수술시뮬레이션이나, 실시간을 요구하는 게임 및 가상환경에서 물리 기반 모델링울 할 때 활용될 수 있다.

• Fisheries and Aquatic Sciences
• /
• 제5권2호
• /
• pp.136-140
• /
• 2002

Every year fish skin, bone and intestines are discarded as processing waste material. The use of fish processing waste material is more economical and environmental-friendly. The leather-like material was produced using shark intestine. Physical charactistics such as tensile strength, elongation, tongue tearing strength, and bursting strength of the leather-like material were measured, and compared with those of a commercial leather product. The values of tensile strength, elongation, tongue tearing strength, and bursting strength of the leather-like material were $3.3kg/mm^2$, $53\%$, 13.0kg/mm and $18kg/cm^2$, respectively. Elongation $(l09\%)$ of the leather-like material coated with lacquer was higher than that of a commercial leather material, and the other factors were similar. The tensile strength and tongue tearing strength of the leather-like material was higher than those of shoes leather, but bursting strength was lower. These results suggested a potential value to use the leather-like material from shark intestines as a substitute for commercial leathers.

• Journal of Mechanical Science and Technology
• /
• 제20권4호
• /
• pp.473-481
• /
• 2006

Predicting fatigue life by numerical methods was almost impossible in the field of rubber materials. One of the reasons is that there is not obvious fracture criteria caused by nonstandardization of material and excessively various way of mixing process. But, tearing energy as fracture factor can be applied to a rubber-like material regardless of different types of fillers, relative to other fracture factors and the crack growth process of rubber could be considered as the whole fatigue failure process by the existence of potential defects in industrial rubber components. This characteristic of fatigue failure could make it possible to predict the fatigue life of rubber components in theoretical way. FESEM photographs of the surface of industrial rubber components were analyzed for verifying the existence and distribution of potential defects. For the prediction of fatigue life, theoretical way of evaluating tearing energy for the general shape of test-piece was proposed. Also, algebraic expression for the prediction of fatigue life was derived from the rough cut growth rate equation and verified by comparing with experimental fatigue lives of dumbbell fatigue specimen in various loading condition.

• 한국통신학회논문지
• /
• 제12권3호
• /
• pp.267-275
• /
• 1987

회로망내에 존재하는 절점과 가지를 분할하여 몇 개의 부분회로망으로 나누고 분할절점에서의 전압 및 전류관계식으로부터 회로망방정식을 정식화하여 각 부분회로망 별로 독립적으로 처리함으로서 대형회로망을 효율적으로 해석할 수 있도록 하였다. 본 논문에서 제안한 분할회로망에 대한 방정식은 분할하기 전의 단일회로망에 대한 방정식과 비교할 때 절점의 순서만 재 배열한 결과가 되므로, 종래의 단일회로망에 대한 산법을 그대로 분할법에 적용할 수 있다. 또한, 어드미턴스행렬의 블록대각형구조를 이용한 병렬계산 알고리즘을 제시하였다.

• 대한기계학회논문집
• /
• 제13권5호
• /
• pp.928-937
• /
• 1989

본 연구에서는 Shih등이 제안한 찢어짐 계수인 Ｔ$_{\delta}$의 불안정 파괴 매개 변수로서의 적용 가능성을 컴팩트 인장 시편(compact tension specimen dlgk CTS로 칭함)을 사용하여 검토한다. 이를 위하여 시험기에 스프링을 부착하여 시편에 불안정 파괴 실험을 수행한다. 재료의 불안정성을 판정하는 찢어짐 계수를 구하기 위해서는 CTOD-정항 곡선을 결정해야 한다. CTOD는 하중선 변위를 측정하여 CTOD- 하중선 변위 관계식으로 평가한다.한다.

• 한국기계가공학회지
• /
• 제20권4호
• /
• pp.127-134
• /
• 2021

In this study, the adhesive fracturing characteristics of a DCB specimen due to single and heterogeneous bonding materials under tearing load was investigated. The experiments were conducted to examine the fracturing properties of the adhesive DCB specimen. As an experimental condition, a forced displacement of 3mm/min was applied to one side while the other side was fixed. As a result of the experiment, it was found that the AL6061-T6 material was superior to the CFRP material in terms of maximum stress, specific strength, and energy release rate when compared to the adhesive fracturing property of a single material. We tested CFRP-AL, a heterogeneous bonding material, and compared its experimental results to the results from the single materials. Based on these results, CFRP-AL with a heterogeneous bonding material was observed to have the superior structural safety compared to single materials for the mode III fracture type.

• The Journal of Korean Physical Therapy
• /
• 제33권6호
• /
• pp.304-306
• /
• 2021

Objectives: We report on a patient who showed mild bradykinesia due to injury of the corticofugal tract (CFT) from the secondary motor area following direct head trauma, which was demonstrated on diffusion tensor tractography (DTT). Case summary: A 58-year-old male patient underwent conservative management for subarachnoid hemorrhages caused by direct head trauma resulting from a fall from six-meter height at the department of neurosurgery of a local hospital. His Glasgow Coma Scale score was 3. He developed mildly slow movements following the head trauma and visited the rehabilitation department of a university hospital at ten weeks after the fall. The patient exhibited mild bradykinesia during walking and arm movements with mild weakness in all four extremities (G/G^-). Results: On ten-week DTT, narrowing of the right CFT from the supplementary motor area (SMA-CFT), and partial tearing of the left SMA-CFT, left CFTs from the dorsal premotor cortex (dPMC-CFT) and both corticospinal tracts (CSTs) at the subcortical white matter were observed. Conclusion: This case demonstrated abnormalities in both CSTs (partial tearing at the subcortical white matter and narrowing), both SMA-CFTs (narrowing and partial tearing) and left dPMC-CFT. We believe our findings suggest the necessity of assessment of the CFTs from the secondary motor area for patients with unexplained bradykinesia following direct head trauma.

• 복식문화연구
• /
• 제31권6호
• /
• pp.756-775
• /
• 2023

This study was aimed at examining the characteristics of women's blue denim on the basis of design elements to provide fundamental data for fashion majors and fashion designers. Seven design elements were selected from previous studies to compare them with the following characteristics of blue denim: color (washing, dyeing), ornamentation (trimming, detailing, painting, and printing), and form modification, tearing, and ripping). Data from 1,520 photographs of the 2019 S/S to the 2023-24 F/W collections were collected through overlapping checks. The data were then subjected to frequency analysis using the Statistical Package for the Social Sciences (version 26). The results are as follows: The most frequent design method used in producing the denim items in our sample was washing, followed by modification, tearing, and ripping and detailing. The greatest change in denim design occurred in 2023, and more design element changes were observed in the F/W season than in the S/S season. Washing was used four times or more frequently than dyeing, while detailing was employed approximately 2 times more often than trimming. With respect to form, the most common approach was modification, followed by tearing and ripping.

• 한국공간구조학회지
• /
• 제7권6호
• /
• pp.5-11
• /
• 2007

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권9호
• /
• pp.1291-1295
• /
• 2004

Histology and transmission electron microscopy studies were carried out on buffalo muscles that were subjected to repeated freeze-thaw cycles at -10 and $-18^{\circ}C$. In the first freeze thaw cycle ($-10^{\circ}C$) structures of muscle showed slight change and closely resembled to those of normal muscle. There were frequent gaps in the half way across the fibres and some cracks in individual fibre were also noticed in second freeze thaw cycle. In the muscle frozen at $-18^{\circ}C$, more pronounced shrinkage with extensive damage of fibres with tearing was observed. The interfibrillar gaps were wider, shrinkage and tearing of the fibres were more distinct after second freeze-thaw cycle. After the second cycle, the interior portion showed large scale degradation of the ultrastructure. Our studies of buffalo muscle showed that under the proper condition, little structural damage takes place in the meat histology and ultrastructure under repeated freeze-thaw conditions. This study adds continued weight to the evidence that limited freeze-thaw cycles will not deteriorate the quality of meat.