• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.32 no.1
• /
• pp.7-15
• /
• 1996

Full scale experiment was carried out in the southern sea of Korea to compare some important factors tested in the model experiment. The results obtained can be summarized as follows ; 1. The changing aspect of mouth performance of the full scale net was almost coincided with the results obtained by the model experiment. The vertical opening(H) and the opening area(S) can be expressed as a function of the towing velocity(V) as H=48.78. $e^0.38V$(unit: m, k't) S= 1,443 .$e^-0.25V$(unit: $m^2V$, k't) 2. The changing aspect of working depth of the full scale net was almost coincided with the results obtained by the model experiment. The depth(D) can be expressed as a function of the towing velocity(V) and the warp length(L) as D=92.49.$V^1.37$(unit: m, k't, L= 150m) D= 12.07+0.32. L (unit: m, V=2k't) [)= - 7.90+0.22 . L (unit: m, V=3k't) 3. Some problems were found to operate A - type full scale net by common bottom pair trawlers. The problems can be summarized as follows; (1) Entangling of wing and square head ropes while net casting.(2) Man power needed and time spent for net hauling by common bottom trawlers increased considerably.( 3) Tearing of nettings caused by over -load of tension and entangling of net pendant while net hauling. To solve these problems, the trawlers are favorable to be equipped with variable pitch propeller and llet drum. While the net is favorable to be constructed with trifurcated net pendant in stead of quadrifurcated net pendant used at present.

• Structural Engineering and Mechanics
• /
• v.74 no.6
• /
• pp.723-735
• /
• 2020

This study is reported the adhesion failure in adhesive bonded composite and specifically for the T-joint structure. Three-dimensional finite element analysis has been performed using a commercial tool and the necessary outcomes are obtained via an eight noded solid element (Solid 185-element) from the library of ANSYS. The structural analysis input has been incurred through ANSYS parametric design language (APDL) code. The normal and shear stress distributions along different layers of the joint structure have been evaluated as the final outcomes. Based on the stress distributions, failure location in the composite joint structure has been identified by using the Tsai-Wu stress failure criterion. It has been found that the failure index is maximum at the interface between flange and web part of the joint (top layer) which indicates the probable location of failure initiation. This kind of failures are considered as adhesion failure and the failure propagation is governed by strain energy release rate (SERR) of fracture mechanics. The different adhesion failure lengths are also considered at the failure location to calculate the SERR values i.e. mode I fracture (opening), mode II fracture (sliding) and mode III fracture (tearing) along the failure front. Also, virtual crack closure technique (VCCT) principle of fracture mechanics steps is used to calculate the above said SERRs. It is found that the mode I SERR is more dominating compared to other two modes of failure for the joint considered. Finally, the influences of various parametric (geometrical and material) effect on SERR of the joint structure are evaluated and discussed in details.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.5
• /
• pp.623-627
• /
• 2000

Objective : Spontaneous lumbar epidural hematoma is a rare entity, although the precipitating factors such as anticoagulation therapy frequently precede it. The authors report four cases of surgically confirmed spontaneous epidural hematoma mimicking lumbar disc herniation. Methods : Between 1995 and 1998, four patients with spontaneous lumbar epidural hematoma were diagnosed. The clinical findings which are identical to that of acute disc herniation are included in this study. The operative findings and radiological characteristics are also included. Results : The magnetic resonance(MR) image findings demonstrated epidural lesions of intermediate to low signal intensity equivalent to those of normal discs on $T_1$-weighted images, and epidural lesions of high signal intensity higher than these normal discs on a $T_2$-weighted image. The image findings also showed rim enhanced pattern of the gadolinium-enhanced $T_1$-weighted MR images. All of the hematomas was associated with a small concomitant disc herniation or underlying annular tear. Conclusion : The authors speculate that spontaneous lumbar epidural hematoma results from tearing of the fragile penetrating vein caused by underlying disc or annulus disruption between Batson' plexus and vertebral body.

• Elastomers and Composites
• /
• v.8 no.1
• /
• pp.33-51
• /
• 1973

We have studied the blending effects of Diene NF 35 R and Alfin 1530 at various blending ratios, 100/0, 70/30, 50/50, 30/70, 0/100, and of carbon black HAF-HS and ISAF-HS at various compounding ratios of 45 PHR, 55 PHR, 65 PHR, for tyre tread rubber. As the results, it was found that; 1. For tyre tread rubber, as the blending ratio, AR 1530/Diene NF 35R, indicated 70/30, the physical properties we examined were most excellent. 2. Excellent result was obtained in the case of carbon black compounding ratio of 55 PHR. The compounding of ISAF-HS made better result than that of HAF-HS for tensile strength, but the compounding of HAF-HS made better result than that of ISAF-HS for tearing strength and best result for abrasion quantity. 3. Heat buildup obtained from compounding carbon black HAF-HS indicated low temperature than that from compounding carbon black HAP-HS. As the compounding amount of carbon black increased, and as the blending amount of AR 1530 decreased, the heat buildup increased. 4. Carbon black was more efficient to AR 1630 than io Diene NF 35 R. 5. In the physical properties, mooney viscosity and mooney scorch time, as the compounding amount of carbon black increased, the values of mooney viscosity increased, but that of mooney scorch time had a max. point at the compoundiug amount of carbon black, 55 PHR.

• Polymer(Korea)
• /
• v.27 no.2
• /
• pp.91-97
• /
• 2003

The effect of fluorination of nanoscaled silicas on mechanical interfacial properties and thermal stabilities of the silica/polyurethane composites was investigated. The surface properties of the silica were studied in X-ray photoelectron spectroscopy and contact angle measurements. Their mechanical interfacial properties and thermal stabilities of the composites were characterized by tearing energy and decomposition activation energy, respectively. As experimental results, the London dispersive component of surface free energy and fluorine functional groups of silica surfaces were increased as a function of fluorination temperature resulting in improving the trearing energy ($G_{IIIC}$) of the composites. Also, the thermal stabilities of the composites were increased as the treatment temperature increases. These results could be explained that the fluorine functional groups on silica surfaces played an important role in improving the intermolecular interactions at interfaces between silicas and polyurethane matrix in a composite system.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.04a
• /
• pp.169-169
• /
• 2011

Xylans are polysaccharides present in large amounts in cell walls of land plants. However, during kraft cooking, a high portion of hemicelluloses including xylans are dissolved in the cooking liquor. In the current trend for a more effective utilization of biomass, attention has been paid to the exploitation of xylans as strength-enhancing additives for paper. It is believed that surface xylan adds flexibility to the cell wall/fiber surface, resulting in stronger fiber-fiber joints or greater contact area between the fibers. Accordingly, there is proposal for a new pulping process involving the extraction of xylan prior to pulping, followed by their re-adsorption on the unbleached pulp. A suitable bleaching process should be employed then, which ought to does not only improve the brightness of the pulp, but also remain the effect of the adsorption of xylan on pulp fibers. The objective of this research was to investigate the impact of hydrogen peroxide bleaching on the properties of unbleached hardwood kraft pulp pretreated with birchwood xylan by measuring optical properties (brightness, post color number, opacity) as well as physical properties (tensile index, tearing index, bulk) of handsheets made from the bleached pulp. In the meantime, the influence of process variables of peroxide bleaching including bleaching temperature, time, initial pH and $MgSO_4$ dosage were studied.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.4
• /
• pp.412-424
• /
• 2004

Statement of problem: Several prosthetic options are available for the restoration of multiple adjacent implants. A passively fitting prosthesis has been considered a prerequisite for the success and maintenance of osseointegration. Passivity is a particular concern with multiple implants because of documented inaccuracies in the casting and soldering process. One way to avoid this problem is to restore the implants individually, however, the restorations of individual adjacent impants requires careful adjustment of interproximal contacts. Purpose: The purpose of this study was to compare the stress distribution pattern and amount surrounding Bicon implants with individual crowns and splinted restorations. Material and method: A photoelastic model of a human partially edentulous left mandible with 3 Bicon implants($4{\times}11mm$) was fabricated. For non-splinted restorations, individual crowns were fabricated on 3 abutments ($4{\times}0.65mm,\;0^{\circ}$, 2.0 mm post, Bicon Inc., Boston, USA) After the units were cemented, 4 levels of interproximal contact tightness were evaluated: open, ideal ($8{\mu}m$ shim stock drags without tearing), medium($40{\mu}m)$), and heavy($80{\mu}m$). Splinted 3-unit fixed partial dentures were fabricated and cemented to the model. Changes in stress distribution under simulated non-loaded and loaded conditions(7.5, 15, 30 lb) were analyzed with a circular polaricope. Results: 1. Stresses were distributed around the entire body of fin in Bicon implants. 2. Splinted restorations were useful for distribution of stress around implants especially with higher loads. 3. By increasing the contact tightness between the individually restored three implants, the stress increased in the coronal portion of implants. Conclusions: Ideal adjustment of the contact tightness was important to reduce the stresses around individually restored Bicon implants.

• Fashion & Textile Research Journal
• /
• v.13 no.6
• /
• pp.856-865
• /
• 2011

This paper intends to examine how Fringe, which is in an inseparable relationship with modern fashion, has been changed and what characteristics it is expressed to have in fashion on the basis of its formative property expressed in modern fashion. In order to empirically analyze Fringe, this paper analyzed a total of 346 Fringe of every type that were generally found in the worldis four biggest collections, from 2006S/S to 2011S/S. This paper found some methods Fringe is made, which are: using a snagged fabric or knit as it is; intentionally snagging or tearing a fabric to make the effect of being snagged; knotting the tail or the edge of clothes, and then, macram$\grave{E}$; and cutting leather or suede, which canit be snagged easily, and making Fringe strands. Fringe strands which are made in the above ways are made into a band and then, attached, or Fringe strands, a feathers, a comb, or beads are attached one by one. Or a tassel is independently or consecutively applied to clothes or ornaments, which are expressed in the form of fringes. Threads, strings, leather, suede, metals, plastics, raffia, horsehair, paper, beads, pearls, crystals, or felt were used for rich texture or unique visual effects. Colors of various brightness and chromas were used in consideration of materials. Through the effects of sameness, similarity, contrast, harmony and gradation with colors of clothes, emphasis or unified harmony was expressed. The expressive characteristics of Fringe, which were found in the modern fashion through those formative characteristics, were organic rhythmical beauty, handicraft decorative beauty, and folksy natural beauty.

• Elastomers and Composites
• /
• v.34 no.4
• /
• pp.341-349
• /
• 1999

In this study, heat and crack resistance of natural rubber (NR) compounds was evaluated. To prevent the effects of the crosslinking system, a conventional vulcanization system was selected, where the accelerator/sulfur ratio was fixed to 0.25. Vulcanizates containing phenylenediamine showed high tensile strength and tear strength compared to other vulcanizates because phenylenediamine can cause additional crosslinking and high dispersion In the vulcanizates. In the pure shear test, vulcanizates containing phenylenediamine showed an excellent tearing energy which was due to the irregular crack path, and showed excellent heat and crack resistance which was also due to the good dispersity of antioxidant and additional crosslinks in the rubbber vulcanizates.

• Archives of Plastic Surgery
• /
• v.33 no.4
• /
• pp.485-490
• /
• 2006

Purpose: As the traditional treatment of the Wassel's type I or II of bifid thumb, Bilhaut-Cloquet, has always been the standard method despite several disadvantages such as tearing of the finger nail, injuries of the growth plate, joint instability, and long visible scarring. To overcome these drawbacks, we applied a modified Bilhaut-Cloquet Method. Methods: The subjects used for the this study were 10 of 20 patients evaluated. The patients underwent modified methods under every type of Wassel's classification. We designed a central wedge Zig-Zag incision and removed the nail and bony tissues in the remaining digit, but not soft tissue if possible, and transferred the ligaments, tendons, and soft tissue to the remaining thumb from the extra digit. We evaluated the patients' lack of extension, the total ROM of the MP and IP joints, the ROM of IP joints, and the lateral deviations of the reconstructed thumb. Results: The results were encouraging, with all patients showing a good functional and aesthetic outcome. Conclusion: The modified method proved a very effective procedure in the treatment of bifid thumb in all types, especially types I or II.