• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.2
• /
• pp.177-189
• /
• 2015

This paper presents an all-direct domain decomposition approach for large-scale structural analysis. The proposed approach achieves computational robustness and efficiency by enforcing the compatibility of the displacement field across the sub-domain boundaries via local Lagrange multipliers and augmented Lagrangian formulation (ALF). The proposed domain decomposition approach was compared to the existing FETI approach in terms of the computational time and memory usage. The parallel implementation of the proposed algorithm was described in detail. Finally, a preliminary validation was attempted for the proposed approach, and the numerical results of two- and three-dimensional problems were compared to those obtained through a dual-primal FETI approach. The results indicate an improvement in the performance as a result of the implementing the proposed approach.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.49-60
• /
• 1991

Fatigue behavior of carbon fiber reinforced polyimide composite materials was studied experimentally and analytically. The physical variables, such as cyclic displacements and hysteresis loop energy were observed during fatigue tests. Fatigue life of the investigated [0/90]$_{2S}$ laminates was predicted by H'||'&'||'H models which was proposed based on the fatigue modulus and resultant strain. The predicted fatigue life by H'||'&'||'H curves was reasonably close to the experimental data. Fractography study shows that fatigue failure mechanism of [0/90]$_{2S}$ laminated composite materials involves failure break, matrix tearing and fiber-matrix debonding as well as delamination of layers.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.310-312
• /
• 2004

The aim of this study was to analyze the characteristics of knee joint sound in frequency domain and classify the knee joint diseases. The spectral analysis of knee joint sounds was performed using LPC(Linear Predictive Coding) and Wigner-Ville distribution. Ten normal subjects and 5 patients with meniscal tearing were enrolled. Each subject was seated on a chair and underwent active knee flexion and extension for 60 seconds. Sampling frequency was 10kHz and electronic stethoscope and electro-goniometer were applied during the knee motion for data collection. The spectral analysis showed 3 peaks in both groups and the difference energy distribution in time-frequency domain. These results suggest that the diagnosis of knee joint pathology using the auscultation could be easier and more correct.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.10a
• /
• pp.121-124
• /
• 2001

Surface-modified silica holds considerable promise in the development of advanced materials for good mechanical properties and stability. In this work, the surface and mechanical interfacial properties of silicas treated with silane coupling agents, such as Y-methacryloxy propyl trimethoxy silane (MPS). Y-glycidoxy propyl trimethoxy silane (GPS), and Y-mercapto propyl trimethoxy silane (MCPS), are investigated. The effect of silane surface treatments of silica on the surface properties and surface energetics are studied in terms of surface functional values and contact angle measurements. And their mechanical interfacial properties of the silica/rubber composites are studied by the composite tearing energy ($G_{IIIC}$). As a result. the mechanical interfacial properties are improved in the case of silane-treated composites compared with untreated one. It reveals that the functional groups on silica surface by silane surface treatments play an important role in improving the degree of adhesion at interfaces in a silica-filled rubber system.

• Development and Reproduction
• /
• v.19 no.1
• /
• pp.25-31
• /
• 2015

We have launched an investigation for Embryonic Development, Larvae and Juvenile Morphology, of Buenos aires tetra in order to build basic data of Characidae and fish seeding production. We brought 50 couples of Characidae from Bizidduck aquarium in Yeosu-si, Jeollanamdo, from Korea on March of 2015. We put them in the tetragonal glass aquarium ($50{\times}50{\times}30cm$). Breeding water temperature was $27.5{\sim}28.5^{\circ}C$ (mean $28.0{\pm}0.05^{\circ}C$) and being maintained. The shape of fertilized egg was round shape, and it was adhesive demersal egg. The egg size was 0.63~0.91 mm (mean $0.74{\pm}0.07mm$, n=20). After getting fertilized egg, the developmental stage was gastrula stage, and embryo covered almost two-thirds of Yolk. Incubation was happened after 16 hours 13 minutes from gastrula stage, and the tail of juvenile came out first with tearing egg capsule. Immediately after the incubation, prelarvae had 3.78~3.88 mm length (mean $3.84{\pm}0.04mm$, n=5), and it had no mouth and anus yet. 34 days after hatching from the incubation, juvenile had 8.63~13.1 mm (mean $10.9{\pm}1.66mm$), and it had similar silver-colored body shape with its mother.

• Textile Coloration and Finishing
• /
• v.29 no.1
• /
• pp.18-24
• /
• 2017

Meta-aramid fabric has been widely used as the reinforcement of composites due to its high flame resistance and tearing strength. Functionality such as abrasion resistance of fabric is very important for specialty fabrics used in car racing suits. In this study, to improve abrasion resistance property of meta-aramid fabric, silicon deposition was conducted by utilizing RF magnetron sputtering. The sputtering process parameters effects were investigated as sputtering power and substrate temperature. The obtained results suggest that the silicon deposition on the meta-aramid fabric has obvious effect upon increasing the abrasion resistance, the thermal insulation and the electric resistance condition for silicon deposition was established. In conclusion, the results of this study have made it possible to manufacture meta-aramids with higher abrasion strength.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.6
• /
• pp.1843-1853
• /
• 1996

The objective of this paper is to evaluate the crack stability of the nuclear main stresm pipes, considering the load reduction effect due to the presence of circumferential throuth-wall crack. Also, the optimization techniques are adoped tosimulate the crack effect on the elbow component of the piuping system. By using a general beam elemetn which contains a discontinuous cross-section, the piping analysis is accomplished to acquire the reduced load. Considering this reduced load, it is feasible for the LBB application in nuclear main stresm pipe. Also, by combining an optimization program and a genaral finite element analysis program, the appropriate dimensions of the simplified beam elemtn which represents the effect of crack in elbow could be successfully determined.

• Journal of Welding and Joining
• /
• v.4 no.1
• /
• pp.47-57
• /
• 1986

The elastic-plastic fracture toughness J_{Ic}$ of submerged arc welded structural steel $SB_{41}$ which has the properties of low strength and high ductility was discussed, especially paying attention to a comparison between two methods recommended by ASTM and JSME. $J_{IC}$ tests were carried out with compact specimens by means of R-curve, SZW, ultrasonic and electric potential methods. Based on the investigations in this study, the results obtained are as follows; (1) The JSME R-curve method gave the smallest $J_{IC}$ values which were physically closest to the crack initiation and seemed to be more practical and stable procedure between the two R-curve methods. (2) The JSME SZW method tended to slightly overestimate the $J_{IC}$ values at initiation of ductile tearing. (3) The ultrasonic and electric potential methods which also had a tendency to overestimate these $J_{IC}$ values were confirmed to be applicable and useful in determining these values. (4) The $J_{IC}$ values by the JSME R-curve method were 18.06 kgf/mm and 17.25kgf/ mm for the smooths and the side grooved CT specimen respectively.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.1 no.1
• /
• pp.91-107
• /
• 1999

The primary purpose of this study is to inquire into the characteristic of exposure presented in fashion, identify the correct concept of exposure from an aesthetic perspective, and grasp the contemporary meaning of exposure presented in fashion. As a result of study, the following findings were obtained: First, the surrealist style of fashion exhibited representations such as the relocation of the partial details, the harmonization of the natural and the artificial, the emphasis or expansion of each part of the body, and the like. It used highlighted the genital region with ornamentations or used the technique of paradoxically exposing the part of the body always covered. And it exbibited the paradoxical relationship of exposure and concealment by exposing the concealed part of the human body. Second, the post-modern style showed the complicated phenomenon that the values of several meanings such as the historic, the folk, and the like appeared in its fashion. It shares in spatiotemporal eclecticism, pluralistic characteristics and the like found in the post-modern culture. Third, the deconstructive style gets rid of the distinction between the external space and the private space by translating underwears into outer garments. It destroys clothing by tearing or perforating clothing whereby it represents the poor image. Coupled with women‘s psychology of exposure and the new generation’s way of thinking indifferent to others‘ eyes, this fashion of deconstruction occupies the great current of fashion. Deconstructive fashion gets away with the rule of ‘having to wear clothing to suit TPO(Time, Place and Occasion), the traditional norm of wearing clothing.

• Nuclear Engineering and Technology
• /
• v.31 no.3
• /
• pp.267-275
• /
• 1999

This paper deals with the industrial problem of thermal striping damage on the French prototype fast breeder reactor, Phenix and it was studied in coordination with the research program of IAEA. The thermomechanical and fracture mechanics evaluation procedure of thermal striping damage on the tee-junction of the secondary piping using Green's function method and standard FEM is presented. The thermohydraulic(T/H) loading condition used in the present analysis is the random type thermal loads computed by T/H analysis on the turbulent mixing of the two flows with different temperatures. The thermomechanical fatigue damage was evaluated according to ASME code section 111 subsection NH. The results of the fatigue analysis showed that fatigue failure would occur at the welded joint within 90,000 hours of operation. The assessment for the fracture behavior of the welded joint showed that the crack would be initiated at an early stage in the operation. It took 42,698.9 hours for the crack to propagate up to 5 mm along the thickness direction. After then, however, the instability analysis, using tearing modulus, showed that the crack would be arrested, which was in agreement with the actual observation of the crack. An efficient analysis procedure using Green's function approach for the crack propagation problem under random type load was proposed in this study. The analysis results showed good agreement with those of the practical observations.