• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.583-587
• /
• 2015

Scenario-based learning (SBL) has been used in a variety of training situations across different disciplines. Despite its seemly widespread use in construction management discipline, very few attempts have been made to explore its effectiveness and the respective students' learning experience. Using a survey research design, this study aims to investigate students' perceptions on SBL approach in construction management courses. The specific objectives are: (i) to identify the characteristics of a favourable SBL environment, and (ii) to explore the students' learning experience and effectiveness of the SBL approach. The results show that the four characteristics of a favourable SBL environment are: effective team formulation, constant engagement with lecturer, working in a group, and incorporation of motivational incentive for participation. The students really appreciated the opportunities to apply concepts learnt in the lectures in their SBL group work. Also, they perceived that the SBL approach is effective in developing their reflective and critical thinking skills, analytic and problem-solving skills and their ability to work as a team. These findings should facilitate more critical approaches to similar form of teaching methods.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.5
• /
• pp.123-131
• /
• 2005

Recently, construction activities in reclaimed onshore areas increase in our country In this case, the stability evaluation of the piles for negative skin friction is an important factor for the design of pile foundation in soft grounds. Nevertheless, the design of piles for negative skin friction (or downdrag forces) is probably poorly understood by many geotechnical engineers. It is mainly because only the bearing capacity aspect is taken into account for the downdrag evaluation of piles in most of design specifications. However, the problems fur negative skin friction of piles are mostly related with settlement rather than bearing capacity Meanwhile, LRFD (Load Resistance Factor Design) approach considers both ultimate limit state in terms of bearing capacity and serviceability limit state in terms of settlements. This paper proposes LRFD approach for the downdrag evaluation of piles and compares this approach to traditional design approach. And also a case history is analyzed. Through the analysis some suggestions to solve the problems for the design of piles for negative skin friction are suggested.

• Journal of Trauma and Injury
• /
• v.29 no.4
• /
• pp.139-145
• /
• 2016

Purpose: The major pelvic trauma results in high mortality with associated fatal other injuries. During early stage of resuscitation, multidisciplinary approach is essential to improve the survival and outcomes. This study aims to report the effect and positive outcome of the trauma team approach on the management of hemodynamically unstable pelvic bone fracture. Methods: This retrospective review included all patients with hemodynamically unstable pelvic bone fracture admitted between March 2007 and December 2015. Patients were divided into group A, which comprised those admitted before the trauma team approach was started, and group B, which comprised those admitted after the approach was started. The advanced trauma life support protocol was followed for all patient. The comparisons between the two groups were based on medical records. Study variables included demographics, initial vital sign, injury severity score, fracture type, and injury mechanism. We analyzed the outcomes in each group with respect to the time interval for doctors' arrival, total length of stay in the emergency department (ED), time interval for computed tomography evaluation, 24-hour mortality, time interval for definitive fixation, and definitive fixation in the time-window of opportunity. Results: Fifty-three patients met the inclusion criteria. No statistically significant differences in demographic data existed between the two groups. The time interval for doctors' arrival (min, $63.09{\pm}50.48$ vs $21.48{\pm}17.75$; p=0.038) and total length of stay in the ED (min, $269.33{\pm}105.96$ vs $115.49{\pm}56.24$; p=0.023) were significantly improved. The 24-hour mortality was not significantly different between the two groups.(%, 14.3 vs 12.0; p=1.000) However, the time interval for definitive fixation and definitive fixation in the time-window of opportunity showed better results. Conclusion: The trauma team approach has positive effects, which include initial resuscitation through multidisciplinary approach and shortening the time interval to definitive fixation, on the management of hemodynamically unstable pelvic bone fracture.

• Korean Management Science Review
• /
• v.28 no.1
• /
• pp.91-105
• /
• 2011

Among various types of creativity, team creativity has been always receiving attention from both practitioners and researchers because most of works are done in a team format in organizations. Therefore, it would be the best way for corporate performance to increase when team creativity is managed carefully to increase in a steadfast way. Though there are lots of ways to grow team creativity, this study explores the issue of increasing the team creativity by adopting CMC (computer-mediated communication) and exploration and exploitation, which were studied separately, but never analyzed together in the same research framework. Experiments to prove the validity of the research questions are based on ABM (Agent-Based Modeling) simulation. Netlogo language was adopted to build a prototype engine for the simulation engine. Experiment results revealed that in the short-term, both broad CMC mode with high exploration and exploitation, and local CMC mode with high exploration and exploitation result in higher team creativity than other types of combination. However, in the long run, broad CMC mode yields higher team creativity level than local CMC mode.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.675-679
• /
• 2006

Today, the interior noise perceived by the occupants is an important factor in the design of automotive interior assemblies. Buzz, Squeak and Rattle Noises in a Seats are one of the major concerns mentioned above. In this study, the terms 'Buzz, squeak and rattle' were defined as the noise originating from structural vibrations in an assembly. And, the BSR noise of vehicle seat was investigated and the improvement of BSR noise level was confirmed though the structural treatment based on the structural analysis results from the modal and sound intensity of seat.

• Journal of fish pathology
• /
• v.21 no.3
• /
• pp.181-188
• /
• 2008

Polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) assay was used to detect and identify four fish viruses, fish iridovirus, viral hemorrhagic septicaemia virus (VHSV), viral nervous necrosis virus (VNNV), hirame rhabdovirus (HRV). Four viruses were detected by PCR with each specific primers. Identification of iridovirus was achieved by digesting the PCR amplified fragment with a restriction enzyme ApaⅠ. It was possible to distinguish positive from false positive PCR amplicons of VHSV by RFLP of PstⅠ or HindⅢ restriction enzymes. VNNV was identified using RFLP of BamHⅠrestriction enzyme and HRV was identified by XbaⅠ restriction enzyme. This approach can be used for more rapid, simple and specific diagnosis of fish viral diseases.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.11
• /
• pp.1021-1031
• /
• 2020

This study aims to invest in empirical relationships in a model that becomes the process of Team-Performance due to participation in practical training through causality between Training Effectiveness variables, soft-skill competence, Employee-Creativity, and team performance. This study uses a quantitative approach. The analytical tool used is structural equation modeling (SEM) using AMOS version 23 software. Accidental sampling technique is used to collect the sample. As many as 202 respondents filled up a survey questionnaire with complete and valid answers. This study's results significantly contribute to fill the gap of inadequate empirical evidence that can answer critical questions about the missing link between training and employee-performance, more specifically between training-effectiveness and team-performance. The results showed that practical training would encourage employees' soft-skill competence, improve Employee-Creativity, and improve Team-Performance. Furthermore, training-effectiveness also plays a significant role in enhancing employee-creativity and helping in optimal team-performance. This study also found that the relationship between employee-creativity and team-performance did not show positive and significant results; therefore, empirically, it did not support the hypothesis built in this study. Practical training targeted towards increasing soft-skills and creativity is a fundamental reason which not only aims to contribute toward organizational performance but also provides personal feedback for self-development.

• Proceedings of the Microbiological Society of Korea Conference
• /
• 1998.04a
• /
• pp.60.2-60.2
• /
• 1998

• Korean Circulation Journal
• /
• v.54 no.7
• /
• pp.422-424
• /
• 2024

• Journal of Computational Design and Engineering
• /
• v.1 no.3
• /
• pp.187-193
• /
• 2014

One of the hottest challenges in automotive industry is related to weight reduction in sheet metal forming processes, in order to produce a high quality metal part with minimal material cost. Stamping is the most widely used sheet metal forming process; but its implementation comes with several fabrication flaws such as springback and failure. A global and simple approach to circumvent these unwanted process drawbacks consists in optimizing the initial blank shape with innovative methods. The aim of this paper is to introduce an efficient methodology to deal with complex, computationally expensive multicriteria optimization problems. Our approach is based on the combination of methods to capture the Pareto Front, approximate criteria (to save computational costs) and global optimizers. To illustrate the efficiency, we consider the stamping of an industrial workpiece as test-case. Our approach is applied to the springback and failure criteria. To optimize these two criteria, a global optimization algorithm was chosen. It is the Simulated Annealing algorithm hybridized with the Simultaneous Perturbation Stochastic Approximation in order to gain in time and in precision. The multicriteria problems amounts to the capture of the Pareto Front associated to the two criteria. Normal Boundary Intersection and Normalized Normal Constraint Method are considered for generating a set of Pareto-optimal solutions with the characteristic of uniform distribution of front points. The computational results are compared to those obtained with the well-known Non-dominated Sorting Genetic Algorithm II. The results show that our proposed approach is efficient to deal with the multicriteria shape optimization of highly non-linear mechanical systems.