• 한국염색가공학회지
• /
• 제35권4호
• /
• pp.189-195
• /
• 2023

In this study, as one of the eco-friendly dyeing methods, indigo, Phellodendron amurense and Caeasapinia sappan were complexed dyed on cotton fabric. For complexed dyeing, the cotton that was pre-dyed 5 times with indigo was dyed 1 ~ 2 times repeatedly with Phellodendron amurense and Caeasapinia sappan. Then the color, tensile strength, density, and color fastness of complexed dyed sample were analyzed and the following analysis results could be obtained. As a result of color difference measurement, the L* value was 22.7 in the sample in which the cotton was dyed 5 times and then the Phellodendron amurense was dyed 1 time, and the K/S value was 15 or higher in all samples. As a result of measuring the strength, cotton fabrics tended to have a slight decrease in tensile strength when complexed dyeing. As a result of measuring the density, the density decreased by 15 ~ 20% in all samples at the warp and increased by 20 ~ 30% in the weft due to the complexed dyeing of cotton fabric. Moreover, the fastness to washing and drycleaning showed good results of 2 ~ 3 or higher, and the light fastness was 4 or higher.

• 한국염색가공학회지
• /
• 제35권3호
• /
• pp.137-150
• /
• 2023

This paper investigated the applicability of polyester yarn coating using ther- moplastic polyester elastomer (TPEE) to replace polyvinyl chloride (PVC) coated yarn for blinds fabric. For this purpose, suitable TPEE for yarn coating was selected by measuring thermal and rheological properties and the yarn coating process conditions were investigated by changing variables such as extrusion temperature, die and nipple dimensions, take-up speed, and core yarn denier. TPEE coated yarns with a diameter of 0.3 and 0.4 mm were prepared, respectively. Tensile properties and cross-section uniformity revealed by a scanning electron microscopy (SEM) of the TPEE coated yarn were analyzed. Among several candidates, TPEE having a melt index of 35 and melting temperature of 153℃ was the most suitable for replacing PVC, and the opti- mum coating conditions for the TPEE coating yarn were a head temperature of 170℃ and core yarn denier of 420 denier. The selected TPEE coated yarns have enough ten- sile strength and uniformity to replace present PVC coated yarns, certified by SEM photograph.

• 한국염색가공학회지
• /
• 제35권3호
• /
• pp.179-187
• /
• 2023

In this study, we developed a microfiber-based flexible pressure sensor with high sensitivity and excellent skin breathability. A nonwoven fabric composed of microfibers was prepared by electrospinning, which resulted in excellent moisture permeability of the sensor (143 g∙m^-2∙h^-1). In particular, high-pressure sensitivity (0.36 kPa^-1) was achieved by introducing submicron structures on the microfiber surface by controlling the ambient humidity during electrospinning. The fabrication technology of the microfiber-based flexible pressure sensors reported in this study is expected to contribute to the commercialization of flexible pressure sensors applicable to long-term wearable health monitoring as well as virtual/augmented reality and electronic skin applications.

• 한국염색가공학회지
• /
• 제28권2호
• /
• pp.57-62
• /
• 2016

We have synthesized five novel phthaloperinone dyes via a condensation reaction to be applied as yellow colorants for liquid crystal display(LCD) color filters. The reaction between 1,8-naphthalic anhydride(1a), 4-chloro-1,8-naphthalic anhydride(1b), 4-bromo-1,8-naphthalic anhydride(1c), 3-nitro-1,8-naphthalic anhydride(1d), 4-nitro-1,8-naphthalic anhydride(1e) and 1,2-diaminoanthraquinone(2) proceeded readily giving a product in 72-88% yields. The synthesized dyes were characterized by UV-Vis, mass spectrometry and elemental analysis. The spectral properties and thermal stability of the dyes were examined. The dyes absorb at around 400-450nm. All five dyes showed satisfactory thermal stability: the dyes retain 99-100% of its original weight at $300^{\circ}C$, 98-100% at $350^{\circ}C$, 92-98% at $400^{\circ}C$, and 84-92% at $450^{\circ}C$. We have quantitatively evaluated the reaction mechanism and reactivity of dye molecules by means of Pariser-Parr-Pople Molecular Orbital Method(PPP-MO).

• 한국염색가공학회지
• /
• 제20권2호
• /
• pp.59-65
• /
• 2008

The tannin acid and the enzymes have been used in order to improve the ruggedness in laundry and the absorption of dyes and pigments in the textile industry for several years. The enzyme processing on the protein fiber minimizes the damage of the entire fiber and improves the dyeability by effectively modifying only the hydrophobic surface. This study tried out the structural observation by applying the Castanea crenata sieb. et. zucc. containing abundant tannin to the hair dyeing as the natural dyeing pigment along with Protease of Rhizopus sp. The dyeability was improved as compared to the dyeing using only the synthetic tanning and iron mordant. When the depth of pigment was higher in accordance with the surface observation, the enzyme dissolution had impact on dyeing and so the keratin layer on the hair surface. Accordingly, it was found that the appropriate depth was between 0.01 and 0.03%. It was estimated that 0.1% protease would treated within 30min. Consequently, it would cause the good reaction with the functional group of tannin pigment.

• 한국염색가공학회지
• /
• 제20권6호
• /
• pp.1-7
• /
• 2008

The effects of $TiO_2$ contents and UV irradiation treatment on the surface properties of PLA films embedded with $TiO_2$ nanoparticle were investigated. Whereas UV irradiation decreased reflectance of the treated PLA films proportionally with increasing UV energy, the reflectance of PLA/$TiO_2$ films increased with increasing UV energy. The UV irradiation treatment caused PLA/$TiO_2$ blend films more polar as indicated in the generation of new carbonyl group and decrease in zeta potentials, which was more pronounced with the introduction of $TiO_2$. Upon UV irradiation, $TiO_2$ particles appeared on the film surface as observed in SEM images. The PLA/$TiO_2$ blend films showed photocatalytic properties such as photobleaching of methylene blue, deodorization of ammonia and antimicrobial activity in comparison with pure PLA films.

• 한국염색가공학회지
• /
• 제20권6호
• /
• pp.35-41
• /
• 2008

This study investigated the dyeing properties of silk fabrics with Annatto. The dye stuff was extracted by distilled water at $60^{\circ}C$, 10minutes, 1:100 of bath ratio. Dyeability(K/S) and color fastness of silk fabrics were tested under conditions of various concentrations, time, temperature, repeat-numbers of dyeing, pH, mordants variables and methods of mordanting. The highest absorbance was found in methanol extract of Annatto. The optimum dyeing concentration, time and temperature of silk fabrics with Annatto were 25%(o.w.f.), 60min and $60^{\circ}C$ respectively. The K/S value showed higher in post-mordanting than in pre-mordanting, and especially post-Fe mordant showed highest K/S value. In the case of colorfastness, Cu-mordanted fabrics were good washing fastness. Dry cleaning fastness appeared 4-5 grades and light fastness showed lowest grade.

• 한국염색가공학회지
• /
• 제24권3호
• /
• pp.213-220
• /
• 2012

In this study, we investigated the effect of natural vegetable treatment agent on the bleaching and damage of human hair during permanent wave formation. The vegetable treatment agent was prepared by fermenting the mixture of tea leaves (10g), black rice (100g), black bean (100g), corn (100g), malt (50g), and water(500g) at room temperature for 1 week. The degree of bleaching and damage was checked by Munsell value 'L' and morphological changes of hair in FE-SEM. When the hair was bleached, the Munsell value 'L' was almost same regardless of adding the vegetable treatment to the bleaching solution. But when the hair was permanently waved, the curl formation ability was high and the damage was low in the case of adding the vegetable treatment. This means that the vegetable treatment covers the scale of hair and protects the hair from the chemicals.

• 한국염색가공학회지
• /
• 제21권3호
• /
• pp.1-9
• /
• 2009

Polycarboxylics acids are used as crosslinking agents for cotton cellulose to produce durable finished press cotton fabric. It has been observed that the strength of the cotton fabric treated with polycarboxylic acids showed significant reduction as a result of the crosslinking process. The effect of acid-catalyzed depolymerization on the tear strength of cotton fabric is investigated by evaluating the cotton fabric treated by succinic acid, which does not crosslink cotton cellulose and form little ester on the cotton fabric. We find that the tear strength of cotton fabric treated with succinic acid decreases at elevated temperature due to acid-catalyzed depolymerization of cellulose. The magnitude of fabric strength reduction increases as the acid concentration increases. At a constant acid concentration, it increases as the curing temperature and time increases. It decreases as the pH of the acid solution increases. We also find that the dissociation constant of an acid also has a significant effect on the fabric strength reduction. The magnitude of fabric tear strength reduction increases as the acid dissociation constant decreases.

• 한국염색가공학회지
• /
• 제22권2호
• /
• pp.94-100
• /
• 2010

Colored compounds adsorption from the textile dyeing effluents on activated carbons produced from various indigenous vegetable sources by zinc chloride activation is studied. The most important parameters in chemical activation were found to be the chemical ratio of $ZnCl_2$ to feed (3:1), carbonization temperature (460-470 $^{\circ}C$) and time of activation (75 min). The absorbance at 511 nm (red effluent) and 615 nm (blue effluent) are used for estimation of color. It is established that at optimum temperature ($50^{\circ}C$), time of contact (30-40 min) and adsorbent loading (2 g/L), activated carbons developed from rain tree (Samanea saman) saw dust and blackberry (Randia formosa) tree saw dust showed great capability to remove color materials from the effluents. It is observed that adsorption of reactive dyes by all types of activated carbons is more than that of disperse dyes. It is explained that because of its acidic nature the activated carbon can adsorb better reactive dye particles containing large number of nitrogen sites and $-SO_3Na$ group in their structure. The use of activated carbons from the indigenous biomass would be economical, because saw dusts are readily available waste worldwide.