• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.491-492
• /
• 2008

This paper describes the series-gap characteristics of transmission line arrester with switching and lightning impulse flashover test. The transmission line arrester exhibited external gap because it is must not flashover with switching impulse on the other hand it is must flashover with lightning impulse. In accordance, minimum and maximum length of series-gap was determinated with these tests. As gap length is increased flashover voltage was increased in the range of 315.4 kV~496.3 kV and negative polarity exhibited a high voltage. As a result, It was thought tat the series-gap length of transmission line arrester exhibited in the range of 580 mm~1100 mm.

• Journal of Power Electronics
• /
• v.13 no.1
• /
• pp.9-19
• /
• 2013

In this paper, a ripple input current embedded switched-inductor Z-source inverter (rESL-ZSI) and a continuous input current embedded switched-inductor Z-source inverter (cESL-ZSI) are proposed by inserting two dc sources into the switched-inductor cells. The proposed inverters provide a high boost voltage inversion ability, a lower voltage stress across the active switching devices, a continuous input current and a reduced voltage stress on the capacitors. In addition, they can suppress the startup inrush current, which otherwise might destroy the devices. This paper presents the operating principles, analysis, and simulation results, and compares them to the conventional switched-inductor Z-source inverter. In order to verify the performance of the proposed converters, a laboratory prototype was constructed with 60 $V_{dc}$ input to test both configurations.

• Structural Engineering and Mechanics
• /
• v.19 no.6
• /
• pp.603-618
• /
• 2005

The split Hopkinson pressure bar (SHPB) technique is widely used to characterize the dynamic mechanical response of engineering materials at high strain rates. In this paper, attendant problems associated with testing 70 mm diameter concrete specimens are considered, analysed and resolved. An adaptation of a conventional solid circular striker bar, as a means of achieving reliable and repeatable SHPB tests, is then proposed. In the analysis, a pseudo one-dimensional model is used to analyse wave propagation in a non-uniform striker bar. The stress history of the incident wave is then obtained by using the finite difference method. Comparison was made between incident waves determined from the simplified model, finite element solution and experimental data. The results show that the simplified method is adequate for designing striker bar shapes to overcome difficulties commonly encountered in SHPB tests. Using two specifically designed striker bars, tests were conducted on 70 mm diameter steel fibre reinforced concrete specimens. The results are presented in the paper.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.6
• /
• pp.1983-1988
• /
• 2012

Stem cell transplantation is emerging as a possible new treatment for liver cirrhosis, and recent animal studies have documented the benefits of stem cell therapy in a hepatic fibrosis model. However, the underlying mechanism of stem cell therapy is still unclear. Among the proposed mechanisms, the cell replacement mechanism is the oldest and most important, in which permanently damaged tissue can be replaced by normal tissue to restore function. In the present study, Cy5.5-labeled superparamagnetic iron oxide (SPIO) was used to label human mesenchymal stem cells. The uptake of fluorescently labeled nanoparticles enabled the detection and monitoring of the transplanted stem cells; therefore, we confirmed the direct incorporation and differentiation of SPIO into the hepatocyte-like transplanted stem cells by detecting human tyrosine aminotransferase (TAT), well-known enzymatic marker for hepatocyte-specific differentiation.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.5
• /
• pp.89-99
• /
• 1997

The application for real-time database systems must satisfy timing constraints. Typically the timing constraints are expressed in the form of deadlines which are represented by priorities to e used by schedulers. In any real-time applications, since the system maintains sensitive information to be shared by multiple users with different levels of security clearance, security is another important requirement. As more advanced database systems are being used in applications that need to support timeliness while managing sensitive information, protocols that satisfy both requirements need to be developed. In this appear, we proposed a new priority-driven secure multiversion locking (PSMVL) protocol for real-time secure database systems. The schedules produced by PSMVL are proven to e one-copy serializable. We have also shown tat the protocol eliminates covert channels and priority inversions. The details of the protocol, including the compatibility matrix and the version selection algorithms are presented. the results of the performance comparisons of our protocol with other protocols are described.

• Journal of Korean Elementary Science Education
• /
• v.18 no.1
• /
• pp.29-39
• /
• 1999

The purpose of this investigation was to examine and compare pre-service and in-service elementary school teachers' beliefs about Science-Technology-and Society (STS), particularly beliefs about the nature of science and technology, their interaction within society, and the epistemology of science. Large percentage of pre-service and in-service elementary school teachers were understood to perceive as follows : 1. they regarded the science as 〃Knowledge scheme aiming content'and technology as 'skill for solution of actual problems'. 2. they revealed themselves to perceive tat science/ technology influence our lives through new terms and ideas, that science/ technology is affected by governmental policies and that all the people concerned including scientist and technologist should participate in the course of decision making. 3. they perceived that scientist perform their studies by characteristic abilities and that the studies are affected by their religious viewpoint. Moreover, they were understood to perceive that scientific knowledge are constructed through social interaction. 4. they perceived that scientist discover and develop scientific laws by scientific methods such as verification and certification, and that those scientific laws could be changed later.

• Koreanishche Zeitschrift fur Deutsche Sprachwissenschaft
• /
• v.3
• /
• pp.121-150
• /
• 2001

Da die hd. LV in einem Kausalzusammenhang verlaufen sein musste, ist sie im weiteren Sinne zu verstehen. Das meint: Der Wandel P>d muss auch in diese Kategorie $geh\"{o}ren$. $F\"{u}r$ die sinnvolle Deutung des hd. LV $w\"{a}re$ sehr aufschlussreich, die Lautsysteme der beiden Sprachen miteinander zu kontrastieren: Voralt­hochdeutsch(mit LV) und $Voraltfr\"{a}nkisch(ohne\;LV)$. Dabei $k\"{o}nnten$ wir sehr gute $Gr\"{u}nde$ entdecken, wieso die beiden Sprachen auf denselben Reiz der hd. LV ganz unterschiedlich reagieren. Beim Lautwandel $ver\"{a}ndern$ sich in der Tat nicht einzelne Laute, sondern korrelierte Laute parallel. Nach der sog. Reihenschrittheorie $k\"{o}nnen$ wir theoretisch rekonstruieren, welche allophonische Zwischenstufen die hd. LV voraussetzte.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.9
• /
• pp.1330-1335
• /
• 2012

This paper proposes an automatic measurement sampling method for the semiconductor manufacturing process. The method recommends sampling rates using information of process capability indexes and production scheduling plan within the restricted metrology capacity. In addition, it automatically controls the measurement WIP (Work In Process) using measurement priority values to minimize the measurement risks and optimize the measurement capacity. The proposed sampling method minimizes measurement controls in the semiconductor manufacturing process and improves the fabrication productivity via reducing measurement TAT (Turn Around Time), while guaranteeing the level of process quality.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.3
• /
• pp.818-830
• /
• 2000

Automation tools for program analysis are needed in order to program understand and maintain, extract the characteristics of object-oriented program such as class name, member function and data member. In this paper, we carried out design and implementation of the automation tool for effective maintenance of object-oriented software. Being based on Reverse Engineering, this approach extracts class relationship information from C++ source code and generates object-oriented model of class diagram using UML as the standard object-oriented methodology. Therefore, this paper provides developers visualized including class information, definitions of classes, inheritance relationships, set relationships, and simple reference relationships. Finally in this paper, we propose a method that construct class relationship information to table in analysis state and make form of table construction to link form so tat developers can perform understanding and maintaining program efficiently. And this method enable to restructure and reuse in object-oriented model.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.484-485
• /
• 2007

This paper describes the series-gap characteristics of transmission line arrester with switching and lightning impulse flashover test. The transmission line arrester exhibited external gap because it is must not flashover with switching impulse on the other hand it is must flashover with lightning impulse. In accordance, minimum and maximum length of series-gap was determinated with these tests. As gap length is increased flashover voltage was increased in the range of 315.4 kV~496.3 kV and negative polarity exhibited a high voltage. As a result, It was thought tat the series-gap length of transmission line arrester exhibited in the range of 580 mm~1100 mm.