• Journal of the Korean Data and Information Science Society
• /
• 제14권2호
• /
• pp.237-245
• /
• 2003

MDS(multi-dimensional scaling) for preference data is a graphical tool which usually figures out how consumers recognize, evaluate certain products. This article is mainly concerned with an optimal scaling for MDS when target configuration is available. Rotation of axis and SUR(seemingly unrelated regression) methods are employed to get a new configuration which is obtained as close to the target as we can. Methodologies developed here are also illustrated via a real data set.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제3C권1호
• /
• pp.23-27
• /
• 2003

Structural properties of Cu-Ni alloy films, such as preferred orientation, crystallite size, in-ter-planar spacing, cross-sectional morphology, and electrical resistivity, are investigated in terms of tar-get configurations that are used in the film deposition by means of magnetron co-sputtering. Two different target configurations are considered in this study: a dual-type configuration in which two separate tar-gets (Cu and Ni) and different bias types (RF and DC) are used and a Ni-on-Cu type configuration in which Ni chips are attached to a Cu target. The dual-type configuration appears to have some advantages over the Ni-on-Cu type regarding the accurate control of atomic composition of the deposited Cu-Ni alloy. However, the dual-type-produced film exhibits a porous and columnar structure, the relatively large internal stress, and the high electrical resistivity, which are mainly due to the relatively low mobility of adatoms. The affects of thermal treatment and deposition conditions on the structural and electrical properties of dual-type Cu-Ni films are also discussed.

• 한국항공운항학회지
• /
• 제20권3호
• /
• pp.35-43
• /
• 2012

Medium size rotorcraft consist of approximately 5,000 key components. The components must satisfy the target weight and performance requirement through optimization. Therefore a rotorcraft component has approximately 100 times higher unit cost for mass production than the equivalent of an automobile's, along with huge development cost. Configuration management consists of four main parts : configuration identification, configuration control, configuration audit, and data management. In development programme, configuration management is one of the methods to save development cost, and setting a well-structured configuration management system according to the Military Standard is an important factor in success of the programme. The paper proposes a configuration management system suitable for development of various multi-use components development and presents that the configuration management was performed successfully during dual-use component development programme using the established system.

• 한국조경학회지
• /
• 제27권4호
• /
• pp.59-64
• /
• 1999

This study is about gaining orientation through anchorage act of a group of ferryman. In addition, a point acquisition and character of landmark that is closely realated to a point acquisition would be clarified by studying the form of configuration of the earth and object which is used landmark for anchorage. There are 13 anchorage points in the north part of Pusan harbor. 12 anchorage points are used to anchor. A ferryman let a ship which is temporarily anchoring move safely and speedily at the anchorage point. At that time, he uses landmarks by a technique of Overlay View. Between landmarks and viewer would be formed exquisite location combination. A mountain peak, a peak of island, nature configuration of land such as intermitent rock and location, size and form of buildings or structures of a city were variously appeared as landscape elements which were used landmarks. Looking at conditions to be easily captured as a target object, 1. A particular point of a mountain ridge line which was not shield by buildings. 2. In case objects have similar form, the building which was located in the front or the highest. 3. In case of a singular object, whatever there is physical elements, that would be a target object. Through this study a configuration of the ground such as a mountain peak which is become the background of harbor landscape is very important element to find anchorage point in configuration of the ground and object. So, the continuous preservation of the contour line of mountain is needed to do safe and effective anchorage act.

• 한국시뮬레이션학회논문지
• /
• 제29권2호
• /
• pp.21-33
• /
• 2020

본 연구에서는 무인잠수정의 효과적인 대잠전 수행을 위해, 시나리오 기반의 무인잠수정 소나 센서 배열 선정을 위한 시뮬레이터를 개발하였다. 먼저, 대잠전 분야에서 무인잠수정의 임무 및 운용개념을 분석하고, 가장 주요한 임무 중 하나인 위험제어(Hold at Risk)를 시뮬레이션 시나리오로 선정하였다. 다음으로, 시뮬레이터 구성요소 모델을 위하여, 플랫폼별(무인잠수정, 표적 잠수함) 운동모델, 음향모델 및 환경모델을 제시하였다. 특히 음향모델에서는 센서 배열에 따른 빔패턴을 기반으로 수동 소나방정식을 이용하여 탐지여부를 판단하였다. 또한, 표적의 방위 및 고각 추정을 위하여 진폭기반 방위 추정법과 위상 모노펄스 추정기법을 각각 적용하였다. 개발된 시뮬레이터를 통해 센서 배열 변화에 따른 결과의 경향성이 기본적인 빔패턴 이론과 일치하는 것을 보여주며, 다양한 시나리오에 대한 적용 가능성을 시사한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권12호
• /
• pp.6139-6160
• /
• 2018

For ease of use and access, web browsers are now being used to access and modify sensitive data and systems including critical control systems. Due to their computational capabilities and network connectivity, browsers are vulnerable to several types of attacks, even when fully updated. Browsers are also the main target of phishing attacks. Many browser attacks, including phishing, could be prevented or mitigated by using site-, user-, and device-specific security configurations. However, we discovered that all major browsers expose disparate security configuration procedures, option names, values, and semantics. This results in an extremely hard to secure web browsing ecosystem. We analyzed more than a 1000 browser security configuration options in three major browsers and found that only 13 configuration options had syntactic and semantic similarity, while 4 configuration options had semantic similarity, but not syntactic similarity. We: a) describe the results of our in-depth analysis of browser security configuration options; b) demonstrate the complexity of policy-based configuration of web browsers; c) describe a knowledge-based solution that would enable organizations to implement highly-granular and policy-level secure configurations for their information and operational technology browsing infrastructures at the enterprise scale; and d) argue for necessity of developing a common language and semantics for web browser configurations.

• Journal of Chest Surgery
• /
• 제54권2호
• /
• pp.117-126
• /
• 2021

Background: Several factors, such as the degree of target vessel stenosis, are known to be associated with radial artery (RA) graft patency in coronary artery bypass grafting (CABG). There is a lack of data regarding the effect of the RA proximal configuration (aortic anastomosis versus T-anastomosis). This study evaluated the effects of the RA proximal configuration on the patency rate and clinical outcomes after CABG. Methods: We conducted a retrospective study, analyzing 328 patients who had undergone CABG with an RA graft. We divided the patients into 2 groups. The primary endpoint was RA patency and the secondary endpoints were overall mortality and major adverse cardiac and cerebrovascular events (MACCE). We performed a propensity score-matched comparison. Results: Aorta-RA anastomosis was performed in 275 patients, whereas the rest of the 53 patients received T-RA anastomosis. The mean age was 67.3±8.7 years in the T-RA anastomosis group and 63.8±9.5 years in the aorta-RA anastomosis group (p=0.02). The mean follow-up duration was 5.13±3.07 years. Target vessel stenosis ≥70% (hazard ratio [HR], 0.42; 95% confidence interval [CI], 0.20-0.91; p=0.03) and T-RA anastomosis configuration (HR, 2.34; 95% CI, 1.01-5.19; p=0.04) were significantly associated with RA occlusion in the multivariable analysis. However, T-RA anastomosis was not associated with higher risks of overall mortality and MACCE following CABG (p=0.30 and p=0.07 in the matched group, respectively). Conclusion: Aorta-RA anastomosis showed a superior patency rate compared to T-RA anastomosis. However, the RA proximal anastomosis configuration was not associated with mortality or MACCE.

• 한국전자파학회논문지
• /
• 제22권10호
• /
• pp.966-980
• /
• 2011

레이더는 표적으로부터 반사된 신호의 크기, 도플러 속도로부터 표적의 거리, 속도 정보를 알 수 있으며, 이런 반사 신호의 특징들은 표적의 반사 특성과 기동에 의해 결정된다. 표적의 위치 정보에 대한 각도 오차는 합채널에 대한 차채널의 크기 비로부터 추출된다. 본 논문에서는 다기능 레이더의 성능을 평가하고 분석하기 위한 레이더 반사 신호 모의 장치(RSSE)에 대해 소개하였다. 개발된 레이더 반사 신호 모의 장치는 다채널 직접 디지털 합성(MC-DDS)을 이용하여, 재밍 신호를 포함한 다중 표적 환경을 모사할 수 있도록 구현되었으며, 효율적인 하드웨어 구조 설계를 통해 모사할 수 있는 표적의 수를 용이하게 확장할 수 있도록 설계되었다. 개발된 모의 장치의 요구 성능 및 기능을 시험 환경에서 확인하였으며, 신호 처리기(RSP)와의 연동 시험 구성에서 표적 탐지 성능을 입증하였다.

• 설비공학논문집
• /
• 제12권1호
• /
• pp.59-66
• /
• 2000

In a previous paper, we have examined the effects of nozzle configuration and jet to jet spacing on the heat transfer of 1 row of circular water jets. In this paper, experiments have been conducted to obtain the effects of nozzle to target plate distances on the heat transfer of 1 row of 3 jets and 1 row of 5 jets. The nozzle configurations are Cone type, Reverse cone type and Vertical circular type. Nozzle to target plate distance H was varied from 16 mm(H/D=2) to 80mm(H/D=10). For fixed value of mass flow rate and nozzle to target plate distance, larger values of average Nusselt number were obtained for the smaller jet to jet spacing. For the array of water jets, the average heat transfer was decreased slightly with increasing nozzle to target plate distance at low jet velocity of $\textrm{V}_{o}$=3 m/s. However, except for $\textrm{V}_{o}$=8 m/s of 1 row of 5 jets, it was increased with increasing nozzle to target plate distance at high jet velocity of $\textrm{V}_{o}$$\geq$6m/s. We proposed to apply the nozzle configuration of maximum average heat transfer to each nozzle to target plate distance for 1 row of 3 jets, and, it was Reverse cone type nozzle for 1 row of 5 jets(Reynolds number$\geq$36000).

• 한국표면공학회지
• /
• 제41권5호
• /
• pp.205-213
• /
• 2008

A 3D particle code is developed to analyze electron behavior in a planar magnetron sputtering cathode either in balanced or unbalanced configuration. Three types of collisions are included; electron - neutral elastic, excitation to a metastable state and ionization. Flight path is calculated by a 4-th order Runge-Kutta method with a time step of 10 ps. Effects of electron starting position, magnetic field intensity and configuration were analyzed. For a more efficient and accurate modeling, multithreading technique is considered for multicore CPU computers. Under an assumption of cold ion approach, target erosion profiles are predicted for a flat target surface.