• International Journal of Concrete Structures and Materials
• /
• v.9 no.1
• /
• pp.1-20
• /
• 2015

This work is devoted to the study of fresh and hardened properties of concrete containing recycled gravel. Four formulations were studied, the concrete of reference and three concretes containing recycled gravel with 30, 65 and 100 % replacement ratios. All materials were formulated on the basis of S4 class of flowability and a target C35 class of compressive strength according to the standard EN 206-1. The paper first presents the mix design method which was based on the optimization of cementitious paste and granular skeleton, then discusses experimental results. The results show that the elastic modulus and the tensile strength decrease while the peak strain in compression increases. Correlation with the water porosity is also established. The validity of analytical expressions proposed by Eurocode 2 is also discussed. The obtained results, together with results from the literature, show that these relationships do not predict adequately the mechanical properties as well as the stress-strain curve of tested materials. New expressions were established to predict the elastic modulus and the peak strain from the compressive strength of natural concrete. It was found that the proposed relationship E-$f_c$ is applicable for any type of concrete while the effect of substitution has to be introduced into the stress-strain (${\varepsilon}_{c1}-f_c$) relationship for recycled aggregate concrete. For the full stress-strain curve, the model of Carreira and Chu seems more adequate.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.283.1-283.1
• /
• 2016

Tin Oxide(SnO2) has been widely investigated as a transparent conducting oxide (TCO) and can be used in optoelectronic devices such as solar cell and flat-panel displays. It would be applicable to fabricating the wide bandgap semiconductor because of its bandgap of 3.6 eV. In addition, SnO2 is commonly used as gas sensors. To fabricate high quality epitaxial SnO2 thin films, a powder sputtering method was used, in contrast to typical sputtering technique with sintered target. Single crystalline sapphire(0001) substrates were used. The samples were prepared with varying the growth parameters such as gas environment and film thickness. Then, the samples were characterized by using X-ray diffraction, scanning electron microscopy, and atomic force microscopy measurements. We found that the strain evolution of the samples was highly affected by gas environment and growth rate, resulted in the delamination under O2 environment.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.6
• /
• pp.1411-1421
• /
• 1995

A rigid visco-plastic finite element method has been developed for modeling superplastic forming processes. The optimum pressure-time relationship for a target strain rate and thickness distributions was predicted using two-node line element based on membrane approximation for plane strain and axisymmetric condition. Analysis of superplastic forming was carried out using the developed program and the numerical results were compared to the values available in the literature for plane strain problems. For description of the contact between the dies and sheet, the direct projection method was applied to the complicated problem and the validity of the scheme was tested. Experiments for the various geometries such as hemisphere and cone were performed with the developed forming machine using the calculated optimum pressure-time curves. Comparison between analysis and experiments showed good agreement.

• Microbiology and Biotechnology Letters
• /
• v.23 no.2
• /
• pp.123-130
• /
• 1995

DNA topoisomerase I have been shown to be important therapeutic target in cancer chemotherapy. Chemotaxonomy and numerical identification were carried out for an isolate strain No.7489 producing an antibiotic that inhibits DNA topoisomerase I activity. The genus of strain No.7489 was determined as Streptomyces sp. from culture, morphological and chemotaxonomic data. Thirty-nine taxonomic unit characters were tested and the data were analyzed numerically using the TAXON program. The isolate was best matched to Streptomyces melanosporofaciens in the major cluster 32 of Streptomyces. Therefore, it was concluded that the isolate was identified to be a member of Streptomyces melanosporofaciens.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.1085-1087
• /
• 2002

Deformation of soft tissue is known inhomogeneous and non-linear in general. In this study, we propose a measurement methodology of local/global strain during soft tissue elongation precisely using laser extensometer which has high accuracy, resolution and is possible to measure global/local strain. The mechanical tensile test are performed on tibialis cranialis, flexor hallucis longus, extensor digitorum longus of swine hindlimb. In order to measure target displacement, reflective marker is attached to detect elongation on specimen using surgical adhesive. The result of this study is to show that laser extensometer is valid to measure longitudinal elongation which is inhomogeneous and non-linear fur soft tissue.

• Archives of Pharmacal Research
• /
• v.11 no.1
• /
• pp.61-64
• /
• 1988

To investigate the antibiotic constituents of Korean basidiomycetes the carpophores of the wood-rotting basidiomycetes were collected from several locations of Korea, and from them 17 mycelial strains were isolated on potato-dextrose-agar plates supplemented with tetracycline ($20\;{\mu}g/m{\ell}$. The isolated strains were shake-cultured in glucosepeptone-yeast extract medium and then the antibacterial activities of the culture filtrates were assessed by disc-plate method. Among them, 12 strains (70.6%) were active, and basidiomycete strain LMCB-109 (Daedalea quercina) and LMCB-116 showed potent activities against all the six bacterial target organisms including Serratia marcescens.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.13 no.1
• /
• pp.31-35
• /
• 2006

The ubiquitin conjugating enzyme 2 (E2) is core component of ubiquitin proteasome pathway (UPP) which represents a selective mechanism for intracellular proteolysis in eukaryotic cells. The E2 has been implicated in the intracellular transfer of ubiquitin to target protein. We show here the involvement of E2 in antiviral immune of Bombyx mori to Bombyx mori nuclear polyhedrosis virus (BmNPV). In this study, mRNA fluorescent differential display PCR (FDD-PCR) was performed with BmNPV highly resistant silkworm strain NB and susceptible silkworm strain 306. At 24 h post BmNPV infection, FDD-PCR with the arbitrary primer AP34 showed that one cDNA band was down-regulated in the midgut of resistant strain, but highly expressed in susceptible strain. The deduced amino acid sequence of this cDNA clone share 99% identity with the recently published B. mori ubiquitin conjugating enzyme E2 (Genbank NO: DQ311351). Fluorescent quantitative PCR corroborated down regulation of E2 in resistant strain. We there conclude that BmNPV infection evokes strong response of susceptible strain including activation of UPP. BmNPV may evolve escape mechanisms that manipulate the UPP in order to persist in the infected host. In addition, the identification of down-regulation of E2 in resistant strain, as well as structure data, are essential to understanding how UPP operates in silkworm antiviral immune to BmNPV disease.

• Microbiology and Biotechnology Letters
• /
• v.19 no.1
• /
• pp.8-13
• /
• 1991

Bacteriocin-producing microorganisms were screened from raw milk and tested their antimicrobial activities against Lactobacillus plantarum ATCC 8014 as target organism, Antimicrobial substances isolated showed broad antimicrobial spectra against Gram positives and negatives. Strain 1112-1 was selected as a test organism due to its highest antimicrobial activity among the isolates. Antimicrobial substance produced by 1112-1 completely suppressed the growth of Lactobacillus plantarum at 230 IUIml and showed 11% growth inhibition of E. coli at 500 IUIrnl level. The antimicrobial substance was found to be proteinaceous material which was inactivated by carboxypeptidase, elastase, alpha amylase, amyloglucosidase, pronase, protease IV, alpha chymotrypsin, ficin, cellulase, phosphatase and lipase. The molecular weight was estimated by SDS-PAGE as 5,900. The isolate 1112-1 was identified as one of the related strains of Lactococcus sp. The strain was different from Lactococcus lactis in the following characteristics: late positive in maltose and sucrose fermentation; positive in mannitol and salicin fermentation; negative in lactose fermentation.

• Elastomers and Composites
• /
• v.41 no.1
• /
• pp.3-9
• /
• 2006

Optimal conditions for preparation of starch/PVA blends were investigated with the consideration of factors that may influence mechanical properties of the blends. Multiplex mixture optimal method as a statistical method were performed and then tensile strength, strain at break, Young's modulus and tear strength of films of the blends were measured to determine the optimal conditions for preparation. The mechanical properties needed for the degradable agricultural mulch were the target of this experiment. Results showed that although the strain at break was a little insufficient, the other properties were very close to the target. This means that the mechanical properties of the film from this blend as a whole are very compatible with those of the reference mulch.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.275-278
• /
• 2000

Bacillus polyfermenticus SCD which is commonly called as 'Bispan strain' has been appropriately used for the treatment of long-term intestinal disorders, since the live strains in the form of active endospores can successfully reach the target intestine. The goal of this study were to get the novel bispan mutant strain and to get higher spore number of bispan mutant in submerged fermentation. Bispan mutant KD21 was obtained using NTG mutagenesis of bispan strain, and bispan mutant was cultivated in 5 L jar fermenter. In this study, productivity and sporulation rate of the bispan mutant KD2l showed approximately 77% increase when compared with bispan strain.