• 한국전산구조공학회논문집
• /
• 제24권5호
• /
• pp.507-512
• /
• 2011

본 논문에서는 종굽힘 최종강도에 대한 선체 중앙단면 구조의 구조신뢰성 해석과 이에 기초한 설계를 다루었다. 길이 100m이상인 8척의 산적화물운반선과 7척의 탱커를 본 연구의 대상 모델로 선정하였다. 본 대상 선박 모델들에 대한 구조 신뢰성 해석결과를 토대로 목표신뢰성 지수를 도출하였다. 두 선종의 중앙단면 설계시 목표신뢰성 지수를 만족할 수 있는 설계공식을 제안하였고, 이를 본 연구대상 선박 모델들의 재설계에 적용하여 그 타당성을 보였다. 이러한 결과로부터 구조 신뢰성 해석에 기초하여 개발한 설계공식에 의한 설계결과는 보다 균일한 수준의 안전성을 제공할 수 있었다.

• 대한조선학회논문집
• /
• 제51권3호
• /
• pp.212-219
• /
• 2014

As subsea production has been revived up, the demand of subsea equipment has also been increased. Among the equipment, subsea tree plays a major role in safety. The tubing hanger is one of the most important components in subsea tree. In this study structural reliability analysis on dual bore tubing hanger of subsea tree is performed. The target reliability which is introduced in ISO regulation is used for judging whether tubing hanger is safe or not. The considered loads are working pressure, working temperature and suspended tubing weight. Thermal-stress analysis on tubing hanger is performed and kriging model is created based on the results of FEM analysis. According to von Mises criterion, limit state equation can be estimated. Reliability analysis is performed by using level 2 method and the result is verified by that of Monte Carlo Simulation. For finding most probable failure point, enhanced HL-RF method is adopted. Because the reliability of model doesn't reach target reliability, an improvement measure should be considered. Thus, it is suggested to change the material of tubing hanger main body to AISI 4140.

• 한국해안·해양공학회논문집
• /
• 제23권6호
• /
• pp.422-428
• /
• 2011

잔교식 안벽의 생애주기비용(Life Cycle Cost, LCC)을 이용하여 신뢰도지수의 최적값을 구하였다. 응답면 기법을 이용한 신뢰성해석을 통해 횡잔교와 돌제식 잔교의 파괴확률을 산정하였다. 파괴확률은 잔교의 파괴 시 복구비용을 산출하는데 활용하였으며 초기공사비와 유지관리비를 모두 고려한 LCC를 최소화시킬 수 있는 신뢰도지수를 찾았다. 지진하중과 접안하중에 대한 다양한 조건에서의 최적 신뢰도지수를 구하였고 이를 통해 신뢰성설계에 사용할 수 있는 목표신뢰도지수를 제안하였다.

• 한국해안·해양공학회논문집
• /
• 제21권3호
• /
• pp.224-229
• /
• 2009

케이슨식 안벽의 Level I 신뢰성설계를 위한 부분안전계수를 산정하였다. 일계신뢰도법에 의한 부분안전계수는 한계상태함수의 확률변수에 대한 민감도, 목표신뢰도지수, 확률특성치 및 설계특성치 등의 함수로써 표현하였으며 전면조위와 잔류수위에 대해서는 현행설계법과의 연계성을 유지하기 위하여 수정부분안전계수를 새롭게 정의하였다. 수치해석을 통하여 목표신뢰도지수에 대한 부분안전계수를 산정하였으며 지진계수의 확률분포는 극치분포를 사용하였다. 지진계수의 설계치를 적용함에 있어서 재현주기가 길수록 부분안전계수가 작게 산정됨을 확인하였다.

• Journal of Information Technology Applications and Management
• /
• 제10권4호
• /
• pp.185-194
• /
• 2003

One method to improve S/W quality before releasing after development is to enhance the its reliability, whose direct methodology is to detect and revise the fault through testing. Once the S/W is released because it meets the target reliability, We operational reliability arises. it is obvious the operational reliability different depending on the condition whether it is universal(package) S/W or dedicated S/W. We propose the methodology to calculate operational software reliability of universal and dedicated S/Ws in this paper.

• 콘크리트학회지
• /
• 제2권2호
• /
• pp.63-72
• /
• 1990

In this study, an optimization design of reinforced concrete structures is performed by using the structural optimization techniques based on the LRFD criteria. The target reliability index is estimated by the optimal reliability index considering the expected cost which is taken as a sum of the structural cost and the expected costs due to failure of the structure. The load and resistance factors calculated by using level I reliability theory with the target reliability index are compared for each load combination (D+L, D+L+w). The results of this study show that the resistance factors are ${\phi}_{M}$=0.90, ${\phi}_{V}$==0.70, ${\phi}_{C}$==0.65 and the load factors are 1.20D + 1.70L, 1.07L + 0.07L + 1.10W. The optimization techinques used to this study are S.L.P. The optimization design based on the LRFD criteria is more economical and rational than other criteria.

• 한국농공학회지
• /
• 제34권1호
• /
• pp.66-77
• /
• 1992

A prototype probabilistic approach to thickness design for asphalt pavement surface course was developed using first-order second moment probability model. The tensile strain (load effect) developing at the bottom of surface layer due to the wheel load and the critical strain (resistance) of asphalt concrete were used as random variables for pavement reliability analysis. Based on the parameters for load effect and resistance data collected from reference and field, simulated data were generated by Monte Carlo method for reliability evaluation of the pavement for a typical rural highway. Thickness of pavement surface course was defined in terms of target reliability of the pavement, growth factor of traffic, design life of pavement and resistance of the asphalt concrete to be placed on the pavement. According to these rationales, prototype thickness design chrats were sugested through example studies. From these, similar design charts can be developed for many pavements if appropriate data and target reliability are determined.

• 한국해안·해양공학회논문집
• /
• 제21권4호
• /
• pp.278-289
• /
• 2009

본 연구에서는 직립 방파제의 케이슨 활동에 대한 목표 신뢰도 지수와 부분안전계수를 산정하였다. 기존 방파제의 신뢰도 지수의 평균값을 보통의 안전도를 갖는 방파제에 대한 목표 신뢰도 지수로 제안하였다. 또한 국내외 방파제의 해석에 기초하여 높은 안전도 또는 낮은 안전도의 목표 신뢰도 지수도 제안하였다. 다음에는 국내 12개 방파제 단면에 대해 각각 계산한 부분안전계수를 평균하여 각 안전도에 대한 부분안전계수를 제안하였다. 본 연구에서 제안한 부분안전계수를 사용하여 계산한 신뢰도 지수가 JPHA(2007)의 완경사 결과와 급경사 결과 사이에 위치함을 보임으로써 제안된 부분안전계수의 적합성을 부분적으로 검증하였다. 제안된 부분안전계수를 이용하여 기존 방파제의 케이슨 폭과 신뢰도 지수를 역으로 계산하였다. 결정론적 설계법으로 설계된 기존 방파제의 신뢰도 지수가 큰 변동 폭을 보이는 반면, 부분안전계수법으로 계산된 값은 작은 변동 폭을 보인다. 이는 목표 파괴확률이 주어졌을 때 부분안전계수법으로 일관성 있는 설계를 할 수 있음을 의미한다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1995년도 봄 학술발표회 논문집
• /
• pp.88-96
• /
• 1995

Seismic design provisions in Korea has developed based on seismic provisions in United States (e.g., ATC 3-06). Current seismic design provisions in U .S. is moving toward adopting enhanced concept for design. Federal Emergence Management Agency (FEMA) Provides the NEHRP recommended Provisions for the Development of Seismic Regulations for New Buildings which can be used as a source document for use by any interested members of the building community. Current seismic design provisions in U .S. generally use a uni-level force. These provisions can not be satisfied if the limit state design is concerned. Limit state can be defined as a state causing undesirable performance o( a structure (e .g., serviceability, ultimate, buckling, etc.). Even if there are provision for controlling drift by two levels, it is still difficult to satisfy limit states using uni-level force. Architectural Institute of Japan (AIJ) uses a hi-level forces Int seismic loadings which can satisfy serviceability and ultimate limit state. However, the seismic parameters used in AIJ guideline are basically determined by subjective manner of code committee member and professions. These parameters need to be determined based on target quantities (target reliability, target energy dissipation, target displacement, target stress level, etc.). This study develops the method to determine the sesmic design parameters based on a certain taget level. Reliability is used as a target level and load factors in ANSI/ASCE 7-88 are selected as design parameters to be determined.

• 한국군사과학기술학회지
• /
• 제21권4호
• /
• pp.471-480
• /
• 2018

Accurate target coordinate is very important in military operations especially field artillery's ground-to-ground attack and air-force's air-to-ground attack. DOS(or TAS) is used to acquire target coordinates from long distance. DOS is comprised of LRF and goniometer. LRF measures distance between DOS and target. Goniometer is comprised of azimuth and vertical angular sensors, DMC and internal GPS receiver. DOS must set the position and orientation(finding grid north) before measurement step(target coordinate acquisition). To improve accuracy of target coordinate, VRS RTK and reference point method are proposed in DOS setup step. VRS RTK provides accurate location coordinate with small deviations, providing high accuracy and precision in positioning and orientation. As a result, horizontal coordinate(easting and northing) accuracy is improved from 2.68 mil(C.L. = 0.95) mil to 0.58 mil(C.L. = 0.95).