• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2744-2746
• /
• 2003

ISO/IEC 15408 requires the TOE(Target of Evaluation) Security Environment section of a Protection Profile(PP) or Security Target(ST) to contain a list of assumptions about the TOE security environment or the intended usage of the TOE. This paper presents a specific conditions should be assumed to exist in the smart card environment and the analysis of those conditions developer of smart card PP must consider.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.5
• /
• pp.16-23
• /
• 2011

Muzzle flash based on gunnery is the target that has huge energy. So, gunnery target in a long range over xx km is distinguishable in the IR(infrared) images, on the other hand, is not distinguishable in the CCD images. In this paper, we propose the classification method of gunnery targets in a infrared images and in a long range. The energy from gunnery have an effect on varous pixel values in infrared images as a property of infrared image sensor, distance, and atmosphere, etc. For this reason, it is difficult to classify gunnery targets using pixel values in infrared images. In proposed method, we take the profile of pixel values using high performance infrared sensor, and classify gunnery targets using modeling GMM and shape of profile. we experiment on the proposed method with infrared images in the ground and aviation. In experimental result, the proposed method provides about 93% classification rate.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.526-526
• /
• 2012

DC magnetron discharges were studied using three-dimensional self-consistent particle-in-cell and Monte Carlo collisional (PIC-MCC) simulation codes. Two rectangular sputter sources (120 mm * 250 mm and 380 mm * 200 mm target sizes) were used in the simulation modeling. The number of incident ions to the Cu target as a function of position and simulation time was obtained. The target erosion profile was calculated by using the incident ions and the sputtering yields of the Cu target calculated with SRIM codes. The maximum ion density of the ion density distribution in the discharge was about $10^{10}cm^{-3}$ due to the calculation speed limit. The result may be less than one or two order of magnitude smaller than the real maximum ion density. However, the target erosion profiles of the two sputter sources were in good agreement with the measured target erosion profiles except for the erosion profile near the target surface, in which which the measured erosion width was broader than the simulation erosion width.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.10 no.2
• /
• pp.68-73
• /
• 2011

In Ground Penetrating Radar (GPR) for buried object detection, it is important to identify a buried target because removal of an unwanted target requires as much time and effort as does a wanted target. For a simulation of the target identification, the FDTD (Finite Difference Time Domain) and PML (Perfectly Matched Layer) techniques are widely used. Simulation results vary depending on the type of the buried object and the position of the source. As a result, this paper illustrates the range (time) profile of the five types of facilities including PEC (Perfect Electric Conductor) rectangular box and pipes, and shows the comparison of the range profile of the buried facilities.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.5
• /
• pp.651-659
• /
• 2012

Target operational availability setting is the first step to setting up a goal which a weapon system development project have to achieve and doing RAM analysis during whole life of a weapon system. It is important as a key factor to doing RAM analysis in the early phase of weapon system development. This paper present a methodology to set a target operational availability for, especially, a warship when it develop. This methodology uses Operational Mode Summary/Mission Profile(OMS/MP) of the developing warship and RAM analysis results of similar warships to calculate wartime and peacetime target operational availability. It will be used in early phase of not only warship development but also army or aircraft weapon systems when these develop.

• Journal of Korean Society for Quality Management
• /
• v.49 no.2
• /
• pp.145-159
• /
• 2021

Purpose: A statistical similarity evaluation to compare pharmacokinetics(PK) profile data between nonclinical and clinical experiments has become a significant issue on many drug development processes. This study proposes a new similarity index by considering important parameters, such as the area under the curve(AUC) and the time-series profile of various PK data. Methods: In this study, a new profile similarity index(PSI) by using the concept of a process capability index(Cp) is proposed in order to investigate the most similar animal PK profile compared to the target(i.e., Human PK profile). The proposed PSI can be calculated geometric and arithmetic means of all short term similarity indices at all time points on time-series both animal and human PK data. Designed simulation approaches are demonstrated for a verification purpose. Results: Two different simulation studies are conducted by considering three variances(i.e., small, medium, and large variances) as well as three different characteristic types(smaller the better, larger the better, nominal the best). By using the proposed PSI, the most similar animal PK profile compare to the target human PK profile can be obtained in the simulation studies. In addition, a case study represents differentiated results compare to existing simple statistical analysis methods(i.e., root mean squared error and quality loss). Conclusion: The proposed PSI can effectively estimate the level of similarity between animal, human PK profiles. By using these PSI results, we can reduce the number of animal experiments because we only focus on the significant animal representing a high PSI value.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.10
• /
• pp.709-721
• /
• 2006

The traditional broadcasting services over terrestrial, satellite and cable media have been unidirectional mass media regardless of TV viewer's preferences. Recently ich media streaming has become possible via the broadb and networks. Furthermore, since bidirectional communication is possible, personalcasting such as personalized streaming services has been emerging by taking into account the user's preference on content genres, viewing times and actors/actresses etc. Accordingly, personal media becomes an important means for content provision service in addition to the traditional broadcasting service as mass media. In this paper, we introduce a user profile reasoning method for target advertisement which is considered an important application in personalcasting service. The proposed user profile reasoning method predicts an unknown TV viewer's gender and ages by analyzing TV Viewing history data. Based on the estimated user's gender and ages, a target advertisement is provided with TV Anytime metadata. A proposed target advertisement system is developed based on the user profile reasoning and the target advertisement selection method. To show the effectiveness of our proposed methods, we present a plenty of experimental results by using realistic TV viewing history data.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.425-428
• /
• 2009

Aerospace engine application needs to stand high temperature and pressure. Because of its mechanical properties such as high strength at high temperature, Alloy 718 is used aerospace engine application about 80%. But alloy 718's mechanical properties cause some problem to manufacturing profile ring like damage of material and mold. In this study, alloy 718's mechanical properties investigated for knowing its formability and using FE-Simulation for designing profile ring roll process and mold shape. Profile ring rolling processing is designed with "Initial material$\rightarrow$Blank$\rightarrow$Linear Ring$\rightarrow$Profilering". Blank's heating temperature is setting $1100^{\circ}C$ for manufacturing a trial profile ring on the basis of FE-Simulation. As a result of manufacturing alloy 718 profile ring, it is possible to make near target profile shape ring with all of the processing condition which gives in this study.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.649-653
• /
• 2006

Engine Noise is composed of the mechanical and combustion noise. The contribution of combustion noise is generally bigger than the contribution of the mechanical noise at idle condition in DI diesel engine. That noise usually makes a roughness problem at the fundamental engine order. It is difficult to remove the modulation frequency so we have to directly reduce the combustion noise. The key effect of combustion noise reducing solution is the modification of the combustion pressure profile. It is accomplished by the multiple injection method and we solved the 400Hz combustion noise and improved the sound quality at idle condition in DI diesel engine.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.211-213
• /
• 2002

The purpose of this work is acquiring some parameters of therapeutic heavy ion beams after penetrating a thick target. The experiments were performed using a pencil-like $\^$12/C beam of about 3 mm in diameter from NIRS-HIMAC, and the data were taken at several points of the target thickness for $\^$12/C beam of 290 MeV/u and 400 MeV/u. By the simultaneous measurements using some detectors, the atomic number of each fragment particle was identified, and the beam profile, the dose distribution and the LET spectrum for each element were derived.