• Journal of Positioning, Navigation, and Timing
• /
• 제4권2호
• /
• pp.57-65
• /
• 2015

Global Navigation Satellite System (GNSS) including Global Positioning System (GPS) is an important element for navigation of both the military and civil Unmanned Aerial Vehicle (UAV). Contrary to the military UAVs, the civil UAVs use the civil signals which are unencrypted, unauthenticated and predictable. Therefore if the civil signals are counterfeited, the civil UAV’s position can be manipulated and the appropriate movement of the civil UAV to the target point is not achieved. In this paper, spoofing on the autonomous navigation UAV is implemented through field experiments. Although the demanded conditions for appropriate spoofing attack exists, satisfying the conditions is restricted in real environments. So, the Way-point of the UAV is assumed to be known for experiments and assessments. Under the circumstances, GPS spoofing signal is generated based on the Software-based GNSS signal generator. The signal is emitted to the target UAV using the antenna of the spoofer and the effect of the signal is analyzed and evaluated. In conclusion, taking the UAV to the target point is hardly feasible. To implement the spoofing as expectation, the position and guidance system of the UAV has to be known. Additionally, the GPS receiver on the UAV could be checked whether it appropriately tracks the spoofing signal or not. However, the effect of the spoofing signal on the autonomous UAV has been verified and assessed through the experimental results. Spoofing signal affects the navigation system of the UAV so that the UAV goes off course or shows an abnormal operation.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.396-399
• /
• 2002

Intense quasi-monochromatic x-ray irradiation from the linear plasma target is described. The plasma x-ray generator employs a high-voltage power supply, a low-impedance coaxial transmission line, a high-voltage condenser with a capacity of about 200 nF, a turbo-molecular pump, a thyristor pulse generator as a trigger device, and a flash x-ray tube. The high-voltage main condenser is charged up to 55 kV by the power supply, and the electric charges in the condenser are discharged to the tube after triggering the cathode electrode. The x-ray tube is of a demountable triode that is connected to the turbo molecular pump with a pressure of approximately 1 mPa. As electron flows from the cathode electrode are roughly converged to the molybdenum target by the electric field in the tube, the weakly ionized plasma, which consists of metal ions and electrons, forms by the target evaporating. In the present work, the peak tube voltage was almost equal to the initial charging voltage of the main condenser, and the peak current was about 20 kA with a charging voltage of 55 kV. When the charging voltage was increased, the linear plasma x-ray source grew, and the characteristic x-ray intensities of K-series lines increased. The quite sharp lines such as hard x-ray lasers were clearly observed. The quasi-monochromatic radiography was performed by a new film-less computed radiography system.

• 한국전자통신학회논문지
• /
• 제14권1호
• /
• pp.27-32
• /
• 2019

본 연구는 RCS가 작은 목표물에 대한 탐지를 목적으로 하는 초단파대역 레이다의 성능입증을 위한 모의신호 발생장치의 설계 및 구현에 대해 기술하였다. 모의신호 발생장치에 사용하는 송신 및 수신 안테나 빔폭이 커서 격리도에 문제가 발생할 수 있다. 안테나 격리도 문제를 해결하기 위하여 초단파 레이다의 운용조건을 고려하여 간섭신호내성 및 격리도 특성을 개선하였다. 모의신호 발생장치는 초단파 레이다의 송수신 보정, 모의신호생성, 표적의 도플러, RCS 및 거리모사, 원격제어, GPS 클럭 동기 기능 등을 수행한다. 모의신호 발생장치의 제작 후 출력 특성, 반사신호 모사 등 주요특성에 대해서 시험을 하였다. 향후 초단파 레이다 조립이 완료되면 초단파 레이다의 성능 평가를 위하여 활용할 예정이다.

• 한국해양공학회지
• /
• 제35권6호
• /
• pp.446-456
• /
• 2021

To build an environment facility of a large-scale ocean basin, various detailed reviews are required, but it is difficult to find data that introduces the related research or construction processes on the environment facility. The current generator facility for offshore structure safety evaluation tests should be implemented by rotating the water of the basin. However, when the water in the large basin rotates, relatively large flow irregularities may occur and the uniformity may not be adequate. In this paper, design and review were conducted to satisfy the performance goals of the DOEB through computational numerical analysis on the shape of the waterway and the flow straightening devices to form the current in the large tank. Based on this, the head loss, which decreases the flow rate when the large tank water rotates through the water channel, was estimated and used as the pump capacity (impeller) design data. The impeller of the DOEB current generator was designed through computational numerical analysis (CFD) based on the lift surface theory from the axial-type impeller shape for satisfying the head loss of the waterway and maximum current velocity. In order to confirm the performance of the designed impeller system, the flow rate and flow velocity performance were checked through factory test operation. And, after installing DOEB, the current flow rate and velocity performance were reviewed compare with the original design target values. Finally, by measuring the current velocity of the test area in DOEB formed through the current generator, the spatial current distribution characteristics in the test area were analyzed. Through the analysis of the current distribution characteristics of the DOEB test area, it was confirmed that the realization of the maximum current velocity and the average flow velocity distribution, the main performance goals in the waterway design process, were satisfied.

• 전기전자학회논문지
• /
• 제9권2호
• /
• pp.136-142
• /
• 2005

본 논문에서는 3차원 레이다 시험용 타이밍신호 발생기를 개발하였다. 개발된 발생기는 모의표적신호에 고각 정보를 모의할 수 있는 기능을 갖추었고, 내부에 구상변조 기능을 가지고 있어 80MHz까지의 변조된 신호를 발생할 수 있다. 또한 기저대역신호를 외부에서 입력받아 중간주파수로 변환하는 과정을 보드 내에서 처리가 가능하므로 다양한 시험환경을 쉽게 구현할 수 있고 별도의 파형합성기가 필요 없어 저렴한 비용으로 레이다 시험장비 구성이 가능하다. 아울러 운용프로그램에 따라 쉽게 파라미터를 변경할 수 있는 충분한 메모리를 내장하고 있어 시험환경을 변경할 필요가 있을 때 시간 및 비용을 절감할 수 있다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 추계학술대회 논문집
• /
• pp.367-371
• /
• 2007

무(無)정전을 요구하는 특정대상의 중요 전기시설에서, 신뢰도 낮은 수전방식의 정전 가능성 대책으로 대용량의 UPS와 비상발전기를 설치 운영 중에 있다. 근래에 와서 상용전원과 발전기 또는 복수의 발전기에 CTTS (Closed Transition Transfer Switch)를 무(無)정전 전환개폐기 전용으로 사용하고 있다. 본 논문에서 CTTS를 신뢰도 높은 상용2회선 수전방식의 수전변압기 2차 측에 적용한 새로운 무(無)정전 전원설비 구축 방안을 제안하였다. 그 결과 수전설비 구성 간략화와, UPS 비상발전기 설치 최소화로 공간 및 투자절감 효과를 얻을 수 있다.

• 한국해양공학회지
• /
• 제25권6호
• /
• pp.9-16
• /
• 2011

The feasibility of wave energy extraction from a heaving truncated cylinder and the corresponding response of the linear electric generator (LEG) composed of spring, magnet, and coil has been investigated in the frame of three-dimensional linear potential theory. The heaving motion of a circular cylinder is calculated by means of the matched eigenfunction expansion method. Further, the analytical results are validated by numerical results using the ANSYS AQWA commercial code. By the action of a heaving circular cylinder, the magnet suspended by a spring can slide vertically inside the heaving cylinder. The mechanical power is extracted from the magnet motion relative to the coil/stator which is attached to the cylinder. The coupled ODE of a heaving cylinder and LEG system in waves is derived to obtain the magnet motion relative to a cylinder. To maximize the relative motion of the magnet, both the buoy draft and the LEG system parameters (spring stiffness, damping) should be selected properly for generating the double resonance considering the peak frequency of the target spectrum.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제27회 추계학술대회논문집
• /
• pp.135-138
• /
• 2006

가스발생기 사이클 엔진시스템 설계를 입력값과 기본 요구값으로 나누어 설계 요구값을 만족하기 위한 설계변수 11개를 정의하였다. 이 11가지의 설계변수를 통하여 설계 요구값을 만족하기 위한 압력 유량 파워 균형 관계식 11개를 제시하였으며, Newton 방법을 이용하여 해를 찾는 프로그램을 제작하였다. 고안된 프로그램을 이용하여 가스발생기 사이클 엔진의 시스템설계를 수행하여 그 유효성을 입증하였다.

• 전기학회논문지
• /
• 제65권12호
• /
• pp.2240-2250
• /
• 2016

MIFARE Classic is the most popular contactless smart card, which is primarily used in the management of access control and public transport payment systems. It has several security features such as the proprietary stream cipher Crypto 1, a challenge-response mutual authentication protocol, and a random number generator. Unfortunately, multiple studies have reported structural flaws in its security features. Furthermore, various attack methods that target genuine MIFARE Classic cards or readers have been proposed to crack the card. From a practical perspective, these attacks can be partitioned according to the attacker's ability. However, this measure is insufficient to determine the optimal attack flow due to the refined random number generator. Most card-only attack methods assume a predicted or fixed random number, whereas several commercial cards use unpredictable and unfixable random numbers. In this paper, we propose optimal MIFARE Classic attack procedures with regards to the type of random number generator, as well as an adversary's ability. In addition, we show actual attack results from our portable experimental setup, which is comprised of a commercially developed attack device, a smartphone, and our own application retrieving secret data and sector key.

• 전력전자학회논문지
• /
• 제21권1호
• /
• pp.58-64
• /
• 2016

This study presents a design method for a single-loop voltage controller that is suitable for an arbitrary waveform generator (AWG). The voltage control algorithm of AWG should ensure high dynamic performance and should attain sufficient robustness to disturbances such as inverter nonlinearity, sensor noise, and load current. By analyzing the power circuit of AWG, control limitation and control target are presented to improve the dynamic performance of AWG. The proposed voltage control algorithm is composed of a single-loop output voltage control, an inverter current feedback term to improve transient response, and a load current feedforward term to prevent voltage distortion. The guideline for setting control gain is presented based on output filter parameters and digital time delay. The performance of the proposed algorithm is proven by experimental results through comparison with the conventional algorithm.