• Journal of the Korean Solar Energy Society
• /
• v.33 no.5
• /
• pp.51-59
• /
• 2013

It is usual to evaluate the performance of the cool roof by measuring in-site rooftop temperature using thermal infra-red camera. The principal advantage of rooftop thermal infrared image acquired in oblique vantage point of super high-rise building as a remote sensor is to provide, in a cost-effective manner, area-wide information required for a scattered rooftop target with different colors, utilizing wide view angle and multi-temporal data coverage. This research idea was formulated by incorporating the concept of traditional remote sensing into rooftop temperature monitoring. Correlations between infrared image of super high-rise building and in-situ data were investigated to compare rooftop surface temperature for a total of four different rooftop locations. The results of the correlations analyses indicate that the rooftop surface temperature by the infrared images of super high-rise building alone could be explained yielding $R^2$ values of 0.951. The visible permanent record of the oblique thermal infra-red image was quite useful in better understanding the nature and extent of rooftop color that occurs in sampling points. This thermal infrared image acquired in oblique vantage point of super high-rise made it possible to identify area wide patterns of rooftop temperature change subject to many different colors, which cannot be acquired by traditional in-site field sampling. The infrared image of super high-rise building breaks down the usual concept of field sampling established as a conventional cool roof performance evaluation technique.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.4
• /
• pp.292-301
• /
• 2001

IDDQ Testing is a very effective testing method to detect many kinds of physical defects occurred in CMOS VLSI circuits. In this paper, we consider the most commonly occurring bridging faults in current CMOS technologies and develop pattern generator for IDDQ testing using efficient IDDQ test algorithms. The complete set of bridging faults between every pair of all nodes(internal and external nodes) within circuit under test is assumed as target fault model. The merit of considering the complete bridging fault set is that layout information is not necessary. Implemented test pattern generator uses a new neighbor searching algorithm and fault collapsing schemes to achieve fast run time, high fault coverage, and compact test sets. Experimental results for ISCAS benchmark circuits demonstrate higher efficiency than those of previous methods.

• Journal of Fashion Business
• /
• v.19 no.5
• /
• pp.139-156
• /
• 2015

The purpose of this study is to investigate various information relating to research on the dimensions of clothing used in the sale of products via the internet that used to target global SPA((Specialty Store Retailer of Private Label Apparel) brands sold in Korea. A total of 12 SPA brands including seven global SPA brands and five national. SPA brands were surveyed in this study. Brands were chosen net sales and consumer preferences the last three years. In all SPA brands, literal size designation such as S, M, L and numeric size designation such as 0, 2, 4 or 32, 34, 36 etc. were mixed, but in case of Jean, the size codes mark waist circumference were dominant. European size codes were more common in case of European brands while literal codes were more dominantly used for American size codes with in the US brands. By reviewing the measurement information of the body and product size, the product measurement methods of UNIQLO, FOREVER 21 and TOPTEN were much more accountable and excellent than other brands. However, most of the others didn't offer proper information such as pictograms or figures about measurement methods relating body sizes and product sizes. In addition, most of global SPA brands offered size conversion chart which consumers could reference, however of none of the national SPA brands offered a conversion size chart on their website. Regardless of the type of clothing, the coverage of clothing size was higher than in global SPA brands such as H&M GAP compared to national SPA brands. In particular, 8seconds did not present apparel size ranges that fit consumers' individual clothes sizes.

• The KIPS Transactions:PartD
• /
• v.17D no.1
• /
• pp.41-52
• /
• 2010

A relation between generated test cases and an original requirement is important, but it becomes very complex because a relation between requirement models and requirements are m-to-n in automatic test case generation based on models. In this paper, I suggest automatic generation technique for REED (REquirement EDitor), 1-to-1 requirement modeling tool. Test cases are generated though 3 steps, Coverage Target Generation, IORT (Input Output Relation Tree)Generation, and Test Cases Generation. All these steps are running automatically. The generated test cases can be generated from a single requirement. As a result of applying to three real commercial systems, there are 5566 test cases for the Temperature Controller, 3757 test cases for Bus Card Terminal, and 4611 test cases for Excavator Controller.

• Analytical Science and Technology
• /
• v.28 no.4
• /
• pp.270-277
• /
• 2015

Boiling point (BP) is one of the most fundamental physicochemical properties of organic compounds to characterize and identify the thermal characteristics of target compounds. Previously developed QSPR equations, however, still had some limitation for the specific compounds, like high-energy molecules, mainly because of the lack of experimental data and less coverage. A large BP dataset of 5,923 solid organic compounds was finally secured in this study, after dedicated pre-filtration of experimental data from different sources, mostly consisting of compounds not only from common organic molecules but also from some specially used molecules, and those dataset was used to build the new BP prediction model. Various machine learning methods were performed for newly collected data based on meaningful 2D descriptor set. Results of combined check showed acceptable validity and robustness of our models, and consensus approaches of each model were also performed. Applicability domain of BP prediction model was shown based on descriptor of training set.

• Archives of Plastic Surgery
• /
• v.38 no.5
• /
• pp.687-690
• /
• 2011

Purpose: Pemphigus vulgaris, a rare autoimmune blistering disease of the skin and mucous membranes remains a challenging disease to treat. Management is focused on immunotherapy against autoimmune antibodies that target keratinocyte cell adhesion molecules, and antibiotics preventing secondary infections. There is no established dressing protocol and skin is usually manipulated the least amount possible in order to minimize irritation. The authors suggest that early initiation of aggressive bathing and debridement of skin lesions, with nutritional support, is essential in accelerating resolution. Methods: A 40 year-old male previously diagnosed with pemphigus vulgaris was admitted due to exacerbation of mucocutaneous lesions involving the epidermis and mucosa of the whole body. Steroids, immunosuppressants, intravenous immunoglobulin and antibiotics were administrated, but infection and de-epithelialization progressed, while his general condition deteriorated with a weight loss of over 20 kilograms. The plastic surgery department intervened with daily bathing, debridement of unhealthy debris and non-traumatizing coverage of growing epithelium. Total parenteral nutrition and mobilization with rehabilitation therapy was initiated as early as possible. Results: After bathing, healthy epithelium gradually covered the patient's entire body, while his general condition improved with a corresponding weight gain of 14 kgs. Conclusion: Treatment of pemphigus vulgaris focuses on immunotherapy and infection control. However, an equal amount of attention should be laid on early intervention with daily dressings including bathing and irrigation, nutritional support, and exercise as this accelerates resolution of existing infections, promotes healthy epithelialization and leads to faster recovery.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.4
• /
• pp.846-851
• /
• 2007

The wireless sensor network is one of the most practical and cost-effective solutions for monitoring systems covering wild and wide area such as wildfire monitoring. However, the RF distance between sensor nodes is very short due to the need of low power consumption of the sensor node, so the number of sensor nodes to be deployed in the target area is more than tens of thousands. In this paper, we design and analyze the deployment issues as well as re-deployment problem occurred when the battery is exhausted. We also propose the needs and solutions for coverage problem in dynamic deployment. By the experimental evaluations, we analyze the packet success ratio between sensor nodes under various environments such as obstacles and variable distances.

• Journal of Obesity & Metabolic Syndrome
• /
• v.27 no.4
• /
• pp.238-247
• /
• 2018

Background: We aimed to estimate the proportion of patients with diabetes who achieved target glycemic control, to estimate diabetes-related costs attributable to poor control, and to identify factors associated with them in the United Arab Emirates. Methods: This retrospective cohort study used administrative claims data handled by Abu Dhabi Health Authority (January 2010 to June 2012) to determine glycemic control and diabetes-related treatment costs. A total of 4,058 patients were matched using propensity scores to eliminate selection bias between patients with glycosylated hemoglobin (HbA1c) <7% and HbA1c ${\geq}7%$. Diabetes-related costs attributable to poor control were estimated using a recycled prediction method. Factors associated with glycemic control were investigated using logistic regression and factors associated with these costs were identified using a generalized linear model. Results: During the 1-year follow-up period, 46.6% of the patients achieved HbA1c <7%. Older age, female sex, better insurance coverage, non-use of insulin in the index diagnosis month, and non-use of antidiabetic medications during the follow-up period were significantly associated with improved glycemic control. The mean diabetes-related annual costs were $2,282 and $2,667 for patients with and without glycemic control, respectively, and the cost attributable to poor glycemic control was $172 (95% confidence interval [CI], $164-180). The diabetes-related costs were lower with mean HbA1c levels <7% (cost ratio, 0.94; 95% CI, 0.88-0.99). The costs were significantly higher in patients aged ${\geq}65$ years than those aged ${\leq}44$ years (cost ratio, 1.45; 95% CI, 1.25-1.70). Conclusion: More than 50% of patients with diabetes had poorly controlled HbA1c. Poor glycemic control may increase diabetes-related costs.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.4
• /
• pp.807-819
• /
• 2019

Greybox fuzzing is known as an effective method to discover unknown security flaws reside in software and has been actively researched today. However, most of greybox fuzzing tools require an executable file. Because of this, a library, which cannot be executed by itself requires an additional executable file for greybox fuzzing. Generating such an executable file is challengeable because it requires both understanding of the library and fuzzing. In this research, we suggest the approach to generate an executable file automatically for a library and implement this approach as a tool based on the LLVM framework. This tool shows that executable files and seed files can be generated automatically by static/dynamic analysis of a unit test in the target project. A generated executable file is compatible with various greybox fuzzers like AFL because it has a common interface for greybox fuzzers. We show the performance of this tool as code coverage and discovered unknown security bugs using generated executable files and seed files from open source projects through this tool.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.541-547
• /
• 2019

Recent developments in hacking technology are continuing to increase the number of new security vulnerabilities. Approximately 80,000 new vulnerabilities have been registered in the Common Vulnerability Enumeration (CVE) database, which is a representative vulnerability database, from 2010 to 2015, and the trend is gradually increasing in recent years. While security vulnerabilities are growing at a rapid pace, responses to security vulnerabilities are slow to respond because they rely on manual analysis. To solve this problem, there is a need for a technology that can automatically detect and patch security vulnerabilities and respond to security vulnerabilities in advance. In this paper, we propose the technology to extract the features of the vulnerability-discovery target binary through complexity analysis, and select a vulnerability-discovery strategy suitable for the feature and automatically explore the vulnerability. The proposed technology was compared to the AFL, ANGR, and Driller tools, with about 6% improvement in code coverage, about 2.4 times increase in crash count, and about 11% improvement in crash incidence.