• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2000년도 종합학술발표회 논문집 Vol.10 No.1
• /
• pp.87-90
• /
• 2000

In this paper. we present a method for a systematic design of a dielectric slab polarizer in the circular waveguide. This structure is realized using a tapered dielectric slab inside a circular waveguide. Commercial software is used to obtain the equivalent dielectric constant of the circular waveguide partially filled with a dielectric slab. The length of the tapered region is determined so that the reflection from the dielectric slab is sufficiently low. A polarizer operating at 10 GHz band is designed, fabricated and tested.

• 한국광학회지
• /
• 제11권6호
• /
• pp.411-417
• /
• 2000

SSC(Spot-size converter)가 집적된 1$1.3\mu{m}$ FP(Fabry-Perot)-LD(Laser Diode)에서 SSC 영역의 광도파로 구조가 단일모드광섬유와의 광결합 효율 및 정렬오차에 미치는 영향에 대해서 3차원 BPM(Beam Propagation Method)를 사용하여 알아보았다. 수지 taper의 경우 광결합효율을 향상하기 위해서는 taper 끝단에 충분한 길이의 직선도파로를 형성하는 것이 중요함을 알수 있었다. 또한 수평 taper 구조에서는 출사단 방향으로 도파로폭이 좁아지는 경우가 넓어지는 경우에 비해 유리하고, 수직 taper에 비해 완만한 도파로 경사가 필요함을 알 수있었다. 단일모드 광섬유와의 광결합 손실 및 정렬오차 허용도의 관점에서 좋은 특성을 주는 SSC 도파로 모양을 제시하였다.

• 한국농공학회지
• /
• 제19권3호
• /
• pp.4462-4471
• /
• 1977

The governing differential equations for the tapered circular arch with fixed ends have been derived, and a numerical procedure for the solution of these equations have been developed. The governing differential equations were solved numerically by an initial value integration procedure and Shooting Methods for boundary value problems. The Rungekutta fourth order integration technique was used. The methods was programmed for a Cyber 73-18 computer System, and all esults were obtained on this computer. A detailed study has been made for a fixed arch with an angle of opening equal to 0.7 radian, and the results are presented in detail in tables and curves. It is hoped that the results presented herein is applied to the deformations of gives point from the tri-axial direction of tapered circular arch with fixed ends, bending moment, and torsional moment, and that at the same time results to be used for archwise structures in steel structure.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.219-220
• /
• 2006

In this paper, we designed and implemented the Dual Band Dipole Antenna with Tapered Microstrip Balun for WLAN Access Point. Two dipole antennas with different resonant frequency and the antenna structure combined additional line were implemented for dual band performance. In order to feed the balun current, the tapered microstrip balun was used. Produced the Dual Band Antenna shows a special quality. The quality is that all VSWR is less than 1.5 in the 2.4GHz and 5GHz frequency bands in 802.11 standards, and it profits not less than 1.7dBi having typical Dipole Antenna pattern the very "a form of 8"pattern and Omni-directional pattern.

• Steel and Composite Structures
• /
• 제36권1호
• /
• pp.63-74
• /
• 2020

The present research investigates post-buckling behavior of geometrically imperfect tapered curved micro-panels made of graphene oxide powder (GOP) reinforced composite. Micro-scale effects on the panel structure have been included based on strain gradient elasticity. Micro-panel is considered to be tapered based on thickness variation along longitudinal direction. Weight fractions of uniformly and linearly distributed GOPs are included in material properties based on Halpin-Tsai homogenization scheme considering. Post-buckling curves have been determined based on both perfect and imperfect micro-panel assumptions. It is found that post-buckling curves are varying with the changes of GOPs weight fraction, geometric imperfection, GOP distribution type, variable thickness parameters, panel curvature radius and strain gradient.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 하계학술발표회
• /
• pp.88-89
• /
• 2003

현대 시대에 광통신 시스템은 안정적이고 높은 단일 모드를 갖는 광원을 필요로 한다. 이 조건을 만족하는 λ／4 phase shifted DFB는 높은 단일모드 생성을 보였으나 high spatial hole burning문제점을 가지고 있다. λ／4 phase shift를 사용하지 않은 dual-pitch grating DFB가 소개되었지만 제작상의 어려움을 가지고 있다. 또 다른 구조인 selection-free tapered stripe DFB lasers가 제안되었는데 제작이 간단하면서도 높은 단일모드 생성을 보였다. (중략)

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.217-220
• /
• 2005

In this paper describes novel m antenna using aperture matched type slot structure. It substitutes edge diffractions by curved-surface diffractions which have a tendency to provide an undisturbed energy flow across the junction, around the curved surface, and into free-space. The proposed antenna is composed of a CPW feed structure, exponential tapered slot and the curved sectional at the edge. experimental resulte show that aperture matched type slot improve the performance of the UWB antenna.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제5C권1호
• /
• pp.39-43
• /
• 2005

We proposed a structure for a 1.55 ㎛ strained separate confinement heterostructure (SCH) multi- quantum well (MQW) superluminescent diode (SLD), having a tapered active region. SLD was fabricated through a two-step procedure: the first step being metal organic chemical vapor deposition (MOCVD) and the second-step being liquid phase epitaxy (LPE). We used a 15 laterally tilted stripe and window region to suppress the lasing action of the SLD. The performance of the SLD showed output power of 11 mW with no lasing under 200 mA pulse driving. The full-width at half-maximum was 42 nm at 200 mA, 25℃.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1998년도 제15회 광학 및 양자전자 학술발표회 논문집
• /
• pp.202-203
• /
• 1998

• 한국전기전자재료학회논문지
• /
• 제27권3호
• /
• pp.156-161
• /
• 2014

We have investigated the optical properties of plamonic waveguide with tapered structure based on InP material for photonic integrated circuit(PIC). The proposed plasmonic waveguide is covered with the Ag thin film to generate the plasmonic wave on metallic interface. The optical characteristics of plasmonic waveguide were calculated using the three-dimensional finite-difference time-domain method. The plasmonic waveguide was fabricated with the lengths of 2 to $10{\mu}m$ and the widths of 400 to 700 nm, respectively. The plasmonic mode and optical loss were measured. The optimum plasmonic length is $10{\mu}m$ and widths are 600 and 700 nm in the fabricated waveguide. This plasmonic waveguide can be directly integrated with other conventional optical devices and can be essential building blocks of PIC.