• Title/Summary/Keyword: Tannery waste water

검색결과 7건 처리시간 0.02초

Speciation of Cr(III)/Cr(VI) in Tannery Waste Waters by Using Ion-Exchange Resins

  • Kartal, S.;Tokalloglu, S.;Ozkan, B.
    • Bulletin of the Korean Chemical Society
    • /
    • 제27권5호
    • /
    • pp.694-698
    • /
    • 2006
  • A method has been described for the chemical speciation, preconcentration and determination of Cr(III) and Cr(VI) species in filtered tannery waste waters by flame atomic absorption spectrometry using ion-exchange resins. Amberlite IR-120($H^+$) strongly acidic cation exchanger and Amberlite IRA-410($CI ^-$) strongly basic anion exchanger resins were used for the separation and preconcentration of Cr(III) and Cr(VI) species, respectively. Optimum condition for preconcentration and speciation was obtained by testing pH of sample and eluent, flow rates of sample and eluent, amount of resins, volume of sample and eluents, and effect of foreign ions. The recommended method has been successfully applied for the preconcentration and determination of chromium species in the dissolved phase of waste water samples collected from a tannery waste water treatment plant in Kayseri, Turkey. The detection limits achieved were 0.73 $\mu$g/L for Cr(III) and 0.81 $\mu$g/L for Cr(VI). Recovery studies showed 99% for Cr(III) and 98% for Cr(VI), for samples spiked with single species.

피혁슬러지 고형화시 시멘트 혼화제의 영향 (The Effect of Cement Admixtures on Solidification of Tannery Sludge based Cement Method)

  • 주소영;박상찬;전태성;손종렬;김태영
    • 환경위생공학
    • /
    • 제18권4호
    • /
    • pp.36-44
    • /
    • 2003
  • The cement-based system among S/S(Solidification/Stabilization) is widely used to treat hazardous wastes. In this study, tannery sludge was solidified to evaluate the stabilization effects of using admixtures in the cement-based S/S. Fly ash as substitute also used to increase the strength of the S/S of hazardous waste. The compressive strength measurement and leaching experiment of chromium metal of solidified mortar were carried out to compare and evaluate the physical and chemical characteristics of solidified hazardous waste sludge. From the result of this study, there was increased of compressive strength by using AEW-3(early-hardening AE water reducing agent), and leaching concentration of chromium became low enough to satisfy the regulatory criteria. The successful solidification for the organic contaminant and heavy metal in hazardous waste should enable to treat by cement-based system using early-hardening AE water reducing admixture and fly ash as substituted cement.

피혁폐수의 혐기성 소화시 황산염과 중금속이 메탄균 활성에 미치는 영향 (Effect of Sulfate and Heavy Metals on Methanogenic Activation of in the Anaerobic Digestion of Tannery Wastes)

  • 신항식;오세은
    • 유기물자원화
    • /
    • 제4권1호
    • /
    • pp.13-21
    • /
    • 1996
  • 고농도 황산염과 중금속을 함유한 피혁폐수를 처리하기 위하여, 반응조의 처리도, 황환원균과 메탄균 사이의 기질경쟁 및 크롬농도에 대한 메탄균의 활성을 평가하였다. COD는 $35^{\circ}C$의 반응조 온도에서 유기부하량 2.0 gCOD/l.day와 18시간의 수리학적 체류시간에서 70% 이상의 제거율을 얻을 수 있었다. 황환원균과 메탄균 사이의 기질경쟁에서 황환원균에 의해 이용된 COD는 운전초기 15%에서 실험종료시 43%까지 증가되었다. 이는 유기물 분해로부터 발생되는 대부분의 전자가 황환원균에 의해 이용되어 황산염 환원에 의한 황화물이 생성되므로 메탄균의 활성은 강력히 억제되었다. 전 실험기간 동안 크롬농도는 90% 이상 제거되었으며, 크롬농도의 높은 제거율에도 불구하고 반응조의 처리능력은 거의 감소되지 않았다. 이는 반응조내에서 제거된 3가 크롬이 미생물의 활성에 영향을 미치지 않은 점으로 볼 때 3가 크롬이 6가 크롬에 비해 미생물에 대한 독성영향이 심하지 않다고 볼 수 있다.

  • PDF

Removal of chromium from tannery wastewater by electrosorption on carbon prepared from peach stones: effect of applied potential

  • Ziati, Mounir;Khemmari, Fariza;Kecir, Mohamed;Hazourli, Sabir
    • Carbon letters
    • /
    • 제21권
    • /
    • pp.81-85
    • /
    • 2017
  • The objective of this study is the removal of chromium from tannery wastewater by electrosorption on carbon prepared from lignocellulosic natural residue "peach stones' thermally treated. The followed steps for obtaining coal in chronological order were: cleaning, drying, crushing and finally its carbonization at $900^{\circ}C$. The characterization of the carbon material resulted in properties comparable to those of many coals industrially manufactured. The study of the dynamic adsorption of chromium on the obtained material resulted in a low removal rate (33.7%) without applied potential. The application of negative potentials of -0.7 V and -1.4 increases the adsorption of chromium up to 90% and 96% respectively. Whereas a positive potential of +1.4V allows desorption of the contaminant of 138%.

동물성 유지를 이용한 Biodiesel 생산기술에 관한 연구 (A Study on the Biodiesel Production Technology using Lard Oil)

  • 신수범;민병욱;양승훈;박민석;김해성;백두현
    • 한국응용과학기술학회지
    • /
    • 제23권1호
    • /
    • pp.19-25
    • /
    • 2006
  • Flesh wasters from tannery create major environmental problems. Despite their considerable fat content, these waster do not find important usage. Their disposal is also troublesome and costly. We have investigated the possible use of this fat as the production of biodiesel(fatty acid methyl esters) by transesterification using with fossil fuels. The fat released the waste by boiling water under the optimal condition (i.e., temperature, $120^{\circ}C;$ decompression, 200mbar) and used to dry without refining for the production of fatty acid methyl esters. Under the optimal condition, the experimental value of biodiesel yield was about 96%. The result of the chemical and GC analysis showed fatty acid composition and characteristics of biodiesel. Evaluation of the product indicated that it was suitable for use as a biodiesel fuel. In result of this experiment oil extract from fleshing process can be transformed into an environmentally affination fuel, to provide economical and ecological profits.

청정 피혁 생산을 위한 저크롬 탄닝 공정 기술 보급에 관한 사례 연구 (Study on The Application Case of Clean Technology of Leather Manufacture through technical transfer of chrome reduced tanning process)

  • 김원주;김훈희;이상철;박광수;허종수
    • 청정기술
    • /
    • 제10권1호
    • /
    • pp.27-35
    • /
    • 2004
  • 현재 국내 피혁 업체에서는 대표적인 공해 산업으로 인식되어 있는 피혁 산업의 환경 문제를 해결하기 위하여 심혈을 기울이고 있다. 피혁 선진국에서는 피혁 전문 연구소 및 약품회사, 피혁 업체가 공동으로 대응하여 기술 개발 및 진단, 친환경 약품을 개발하고자 노력하고 있으며 본 연구는 청정 피혁 생산을 위한 저크롬 탄닝 공정 기술 보급 사업을 통하여 환경 문제의 해결하기 위하여 진행되었다. 특히 폐수나 고형폐기물의 형태로 존재하는 크롬의 처리에 환경적, 경제적 문제점으로 인해서 크롬을 적게 사용하는 저크롬 유제 공정과 크롬의 사용을 완전히 배제한 비크롬 유제 공정 기술을 대표적인 4개의 대상기업을 선정하여 기술 이전을 실시한 대표적인 친환경 제혁 기술을 소개 하고자 한다. 아울러 경량성 피혁 소재의 개발을 위해서 비금속을 이용하는 연구를 진행하고 있다.

  • PDF

산업 고형유기폐물의 자원화에 관한 연구 (제1보) 산업 고형유기폐물의 비료와 Humus 원으로서의 물리적 및 화학적 특성에 관하여 (A Study on the Utilization of Industrial Solid Organic Wastes (I). The Physical and Chemical Characteristics of Industrial Solid Wastes with Regard to Fertilizer Value and Humus Sources)

  • 박내정;김용인
    • 대한화학회지
    • /
    • 제19권4호
    • /
    • pp.258-268
    • /
    • 1975
  • 유기폐물을 다량으로 배출하는 산업중에서 대표적인 제지·펄프공업, 식품공업을 선택하여 고형유기폐물과 폐수처리오니의 합리적인 자원화 방법으로서 이들물질의 비료적 가치 및 humus원으로서의 개발가치를 중심으로 이들 물질의 물리적 및 화학적 특성을 조사한 결과이다. 제지${\cdot}$펄프공업 유기고형폐물은 비료성분이 적고 lignin 함량이 높아 비료로서 보다는 humus화하여 토양개량제로서 개발하는 것이 합리적이다. 제혁공업 폐수처리오니는 비료로서 효과도 기대되어 산성토양 개량효과도 기대되나 다량으로 함유한 Cr 으로 인해 오염효과가 문제가 된다. 식품공업의 고형 유기폐물 또는 폐수처리오니는 비료로서 또는 미량요소 공급원으로서 가치가 인정되며 수용성 당류의 량이 높거나 C/N율이 20이하로 낮은 물질은 속성 humus화를 위한 첨가 재료로서의 가치도 인정된다.

  • PDF