• 한국물환경학회지
• /
• 제27권3호
• /
• pp.273-285
• /
• 2011

This study describes the modeling of climate change impact on runoff across southeast Korea using a conceptual rainfall-runoff model TANK and assesses the results using the concept of environmental flows developed by International Water Management Institute. The future climate time series is obtained by scaling the historical series, informed by 4 global climate models and 3 greenhouse gas emission scenarios, to reflect a $4.0^{\circ}C$ increase at most in average surface air temperature and 31.7% increase at most in annual precipitation, using the spatio-temporal changing factor method that considers changes in the future mean seasonal rainfall and potential evapotranspiration as well as in the daily rainfall distribution. Although the simulation results from different global circulation models and greenhouse emission scenarios indicate different responses in flows to the climate change, the majority of the modeling results show that there will be more runoff in southeast Korea in the future. However, there is substantial uncertainty, with the results ranging from a 5.82% decrease to a 48.15% increase in the mean annual runoff averaged across the study area according to the corresponding climate change scenarios. We then assess the hydrologic perturbations based on the comparison between present and future flow duration curves suggested by IMWI. As a result, the effect of hydrologic perturbation on aquatic ecosystems may be significant at several locations of the Nakdong river main stream in dry season.

• Wind and Structures
• /
• 제7권4호
• /
• pp.215-234
• /
• 2004

The tuned liquid damper (TLD) is increasingly being used as an economical and effective vibration absorber. It consists of a water tank having the fundamental sloshing fluid frequency tuned to the natural frequency of the structure. In order to perform efficiently, the TLD must possess a certain amount of inherent damping. This can be achieved by placing screens inside the tank. The current study experimentally investigates the behaviour of a TLD equipped with damping screens. A series of shake table tests are conducted in order to assess the effect of the screens on the free surface motion, the base shear forces and the amount of energy dissipated. The variation of these parameters with the level of excitation is also studied. Finally, an amplitude dependent equivalent tuned mass damper (TMD), representing the TLD, is determined based on the experimental results. The dynamic characteristics of this equivalent TMD, in terms of mass, stiffness and damping parameters are determined by energy equivalence. The above parameters are expressed in terms of the base excitation amplitude. The parameters are compared to those obtained using linear small amplitude wave theory. The validity of this nonlinear model is examined in the companion paper.

• 한국기계연구소 소보
• /
• 통권10호
• /
• pp.49-62
• /
• 1983

A series of model tests on a container ship in waves was executed at the Experimental Towing Tank of Ship Research Station, KIMM. This paper presents the results of resistance, self-propulsion, propeller open-water and ship motion tests in regular head waves. Firstly, the experimental results of ship motion measured on a towed model and a self-propelled model were compared with those of Japanese results showing fairly good agreements. Secondly, the results of resistance and propulsion tests were analyzed and the data of added resistance, thrust increase, torque increase, revolution increase and self-propulsion factors in waves were presented. Also the diffraction force measured on a fixed model in waves was analyzed. Finally, this report shows the propeller characteristics in calm water based on propeller immersion and in regular waves based on wave length.

• 대한조선학회논문집
• /
• 제52권2호
• /
• pp.104-109
• /
• 2015

The Korea Research Institute of Ships & Ocean Engineering (KRISO) has an ice tank to make a test environment similar to the real ice in the polar sea in order to carry out model tests. One of the most important task of the ice tank is to generate the model ice to have similar material properties as sea ice. The primary properties of sea ice which influence the ice performance of ice breakers and ice-strengthened vessels traveling in the polar sea are ice thickness, flexural strength, density, modulus of elasticity and crystal structure etc. Among them, since the density of model ice influences the buoyance resistance of ice for the ship model, the accurate measurement of ice density should be used to obtain the accurate analysis results from the model test. In this paper, some existing methods to measure the density of model ice are reviewed and a new one is proposed to measure it accurately and easily as possible. In this study, the measuring system including an UTM and several measuring devices was established to obtain the model ice density. Polyethylene and ice specimens are used for a series of repeatable measurement tests. From the results, it was recognized that both of the displacement method and the weight/weight methods gave the stable and favorable tendency.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.422-425
• /
• 1994

The main objective of this paper is to explore the feasibility and potential benefits of HFLC series compensator as a power flow controller in an ac power system. To accomplish this goal, the detailed 5 [KHz] model for EMTP simulation study is developed. Among the issues considered are analysis, tank circuit design, link frequency selection, harmonics and filter requirement, control and damping effect. The technical evaluation performed in this research can be used in future power network design and operation.

• 한국해양공학회지
• /
• 제18권2호
• /
• pp.1-9
• /
• 2004

As the first step to investigate the nonlinear interactions between turbulence and marine structures inside a viscous NWT, a LES technique was applied to solve the turbulent channel flow for =150. The employed turbulence models included 4 types: the Smagorinsky model, the Dynamic SGS model, the Structure Function model, and the Generalized Normal Stress model. The simulated data in time-series for the LESs were averaged in both time and space, and statistical analyses were performed. The results of the LESs were compared with those of a DNS, developed in the present study and two spectral methods by Yoon et al.(2003) and Kim et a1.(1987). Based on this research, the accuracy of LESs has been found to be still related to the number of grids for fine grid size).

• 대한조선학회지
• /
• 제24권2호
• /
• pp.11-19
• /
• 1987

A Series 60, $C_b=0.60$ model was tested in the towing tank of Seoul National University. Total resistance, hull attitude, wake distributions and wave measured at FR condition(free trim and sinkage) and FX condition(fixed trim and sinkage). From the measured data, residual, viscous and wave pattern resistance components were evaluated and compared. It is found that the changes in wetted surface area should be considered in predictions of frictional resistances, and can be easily found from hydrostatic data and measured mean sinkages without additional tests. Applications of the concept to the geosim tests of Series 60, Wigley, Lucy Ashton models show that the conventional extrapolation method can be improved considerably.

• 수산해양기술연구
• /
• 제31권1호
• /
• pp.74-83
• /
• 1995

모형 그물에 대한 어군행동의 수치모델링에 관한 연구의 일환으로서 어군행동의 모델링을 위하여 어군행동을 나타내는 운동방정식을 구성하는 각종 힘들의 parameter를 추정하기 위한 기초자료를 제공하고자, 모형 그물을 설치하지 않은 상태에서의 유속 변화에 따른 무지개송어의 유영행동을 화성처리하여 각 개체 위치좌표로부터 계산된 유영속도, 유영깊이, 수조의 변과 개체 사이의 거리, 개체상호간의 최근접거리, 어구의 3차원적 구조 등의 유역특성을 조사 분석한 결과는 다음과 같다. 유영궤적으로부터 무지개송어의 유영행동을 살펴보면, 정수상태에서는 수종 중앙부에서 유영하는 빈도가 높았으며, 수조 벽면으로부터 상당히 떨어져서 유회운동을 하는 것으로 나타났다. 정수상태에서의 평균 유영속도는 21.6~23.6cm/sec(2.5~2.9BL cm/sec)로서 개체수가 많을수록 체장당 유영속도가 빠른 것으로 나타났으며, 유속의 변화에 따른 어군의 평균유영속도는 유속이 증가할수록 유영속도도 증가하여 유속이 25cm/sec인 경우에는 유영속도가 30.6 cm/secd(3.8BLcm/sec)에 달하였다. 어군의 평균 유영깊이는 17~38cm로서 주로 중층의 깊이에서 유영하였으며, 유속이 빨라질수록 유영 깊이가 깊어지고 유영 깊이의 변화가 적어졌다. 수조의 벽과 개체 사이의 평균 거리는 17.6~21.4cm였으며, 유속이 빨라질수록 수조의 벽과 개체사이의 거리가 다소 멀어지는 경향을 나타내었다. 개체상호간의 최근거리는 개체수가 많을수록 가까워지며, 유속의 변화에 따른 개체상호간의 최근접거리 평균치는 3.0~5.9cm(0.4~0.7BL cm)로 나타났다. 어군의 3차원적 구조는 군을 형성하는 개체수가 증가함에 따라 군의 형상이 길이, 폭 및 깊이의 모든 방향으로 넓어지며, 유속이 빨라질수록 길이방향과 폭 방향의 크기가 깊이 방향에 비해 상대적으로 커져 각 방향의 평균 상태비는 2.8 : 2.7 : 1이었다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 추계학술발표회
• /
• pp.28-31
• /
• 2002

The water level fluctuation (WLF) method is a conventional method for quantifying groundwater recharge by multiplying the specific yield to the water level rise. A 2-D unconfined flow model with a time series of the recharge rate is developed. It is used for elucidating the errors of the WLF method which is implicitly based on the tank model where the horizontal flow in the saturated zone is ignored. Simulations show that the recharge estimated by the WLF method is underestimated for the observation well near the discharge boundary. This is due to the fact that the hydraulic stress resulting from the recharge is rapidly dissipating by the horizontal flow near the discharge boundary Simulations also reveal that the recharge was significantly underestimated with increase in the hydraulic conductivity and the recharge duration, and decrease in the specific yield.

• 제어로봇시스템학회논문지
• /
• 제21권12호
• /
• pp.1173-1177
• /
• 2015

This paper deals with estimating the acid concentration of pickling process using the Volterra inputs. To estimate the acid concentration, the whole pickling process is represented by the grey box model consists of the white box dealing with known system and the black box dealing with unknown system. Because there is a possibility of nonlinear term in the unknown system, the Volterra series are used to estimate the acid concentration. For the white box modeling, the acid tank solution level and concentration equations are used, and for the black box modeling, the acid concentration is estimated using the Volterra Least Mean Squares (LMS) algorithm and Least Squares (LS) algorithm. The LMS algorithm has the advantage of the simple structure and the low computation, and the LS algorithm has the advantage of lowest error. The simulation results compared to the measured data are included.