• 한국군사과학기술학회지
• /
• 제3권1호
• /
• pp.218-230
• /
• 2000

In the weapon system development/operation stage, the goals of RAM activities are to support the cost effective performance optimization in design and operation supports. In the study, the main contents are as follows; 1) To establish the operational concept and circumstance of the subsequent tank, the combat/operation scenario, the operational mode summary and mission profile for subsequent tank development are analyzed. 2) To evaluate the administrative and logistics down time for subsequent tank, the prefigured logistics circumstance and maintenance system are analyzed. 3) To calculate the RAM object values, a mathematical model for the user are developed. 4) To examinate the propriety of the RAM object values, the combat readiness are reviewed. The obtained RAM object values are provided to predict and analyze for the combat readiness, staying power, mission reliability, equipment availability and the logistic support capability.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2317-2319
• /
• 1999

765kV Transformer, bank capacity is 2,000MVA, is developed of two seperated tanks per phase because transportation weight of the transformer needs to be reduced. So we will operate one tank per phase in some case, low load or black down of 1 tank, using the one phase-two tank type of 765kV transformer to cut down the cost and improve the reliability of substation.

• 한국수소및신에너지학회논문집
• /
• 제34권6호
• /
• pp.641-649
• /
• 2023

This study analyzes the cool-down process of liquid hydrogen storage tanks, which have advantages in terms of large-capacity transfer, storage, and utilization as hydrogen demand increases. A hydrogen liquefaction plant is selected for analysis and an efficient tank cooling method is sought by comparing the time required for the cool-down process with the gas consumption in connection with the gassing-up process required for the operation of the liquid hydrogen storage tank. The results of this study can be referred to in the operation process after the initial start-up and maintenance of the hydrogen liquefaction plant.

• 한국축산시설환경학회지
• /
• 제5권3호
• /
• pp.175-180
• /
• 1999

This study was carried out to improve septic tank for piggery wastewater treatment of small pig farm. Septic tank were consisted of screen tank, aeration tank with two steps, settling tank, and filtering tank. Aeration tanks were filled with ALC of ø4~5cm. All operation steps were performed by timer from influent to effluent. Septic tank decreased BOD by 94.7% from 4,298.3mg/$\ell$ to 226.3mg/$\ell$ and also decreased SS by 92.4%, from 2,231.3mg/$\ell$ to 161.0mg/$\ell$, respectively.

• 한국수자원학회논문집
• /
• 제50권12호
• /
• pp.803-813
• /
• 2017

최근 송 배수시스템의 최적 펌프운영과 펌프 및 배수지의 적정용량 산정을 위한 다양한 연구가 진행되고 있다. 시설물의 적정 용량을 선정하기에 앞서 송수펌프 용량 및 배수지규모에 따른 시스템 비용(건설 및 운영비용) 과 시스템 내 수질 변화를 분석하는 과정이 필요하다. 본 연구에서는 민감도 분석을 통해 송수펌프 용량과 배수지의 크기가 실제 시스템의 건설 및 운영비용, 그리고 시스템 전반의 수질에 미치는 영향을 분석하였다. 국내 대규모 지방상수도 시스템을 대상으로 분석을 실시하여 시설물 규모가 비용 및 수질에 미치는 영향을 명확히 파악하였다. 적용 네트워크의 경우, 시설물의 용량이 증가할수록 운영비용은 감소하지만, 설계비용은 증가하는 것으로 나타났으며, 이를 통해 비용최소화와 수질안정화를 동시에 만족하는 시설물의 적정용량 범위를 파악할 수 있을 것으로 판단된다.

• 시스템엔지니어링학술지
• /
• 제2권1호
• /
• pp.42-47
• /
• 2006

Advanced military nations have developed anti-tank smart munitions to maximize the effectiveness of the tank combat. In this paper we introduced new munition models (KSTAM) for arrack on the top of the tank and analyzed those operation research. To understand the adaptation to the future tank munition we have performed a trade-off study using the proposed models for smart tank munitions which have been developed or are being developed in advanced nations.

• Journal of Ship and Ocean Technology
• /
• 제7권1호
• /
• pp.19-28
• /
• 2003

The systematic results of anti-rolling tanks tests obtained by bench tester and roll test in towing tank have been examined. The effects on the oscillating period of fluid transfer through the duct of U-tube tank due to damper plates and the effects on roll damping moment of the tank due to swash plates are alto evaluated from the results. A simple control algorithm for a forced fluid transfer in U-tube tanks if devised to active operation of the tank by air blower. The active performances of the tank are confirmed very effective through the tank tests carried out in the irregular waves.

• 상하수도학회지
• /
• 제25권5호
• /
• pp.659-666
• /
• 2011

Although DAF(Dissolved Air Flotation) has been successfully accepted for water and wastewater treatment, the fundamental characteristics of the process have not been fully investigated. Water is saturated with compressed air to dissolve the air into the water at high pressure in saturation tank. Then the water containing dissolved air is released into a floatation tank at a lower pressure, generating micro-bubbles that rise gently through the water and carry the suspended matter to the surface. This study investigated the removal of sewage using automatic mixture type DAF pump and non-powered flotation tank. Characteristics of two devices were compared and analyzed with samples. The results showed that the PAC exhibited higher performance than other coagulants. When air dosage was 2.5ml/l/min, treatment was stable in operation. In the DAF pump with a pressure of 4 atm., the average size of bubbles was 36.2${\mu}m$. Removal efficiency of SS was 80%. At this time removal efficiency of COD was about 80%, of T-N was 30% and T-P was 70% in stable operation. It was concluded that DAF pump system with micro bubble performed higher efficiencies compared to general DAF system for treating wastewater.

• 대한기계학회논문집A
• /
• 제35권12호
• /
• pp.1543-1548
• /
• 2011

본 연구에서는 대용량 액화천연가스(LNG 즉 Liquefied Natural Gas) 저장탱크의 앵커스트랩(anchor strap)의 설계를 위한 구조해석이 수행되었다. 본 논문에 고려된 LNG 저장탱크는 반경이 40m 의 완전방호식 저장탱크로 크게 외조와 내조로 구성되고, 둘 사이의 공간은 단열재인 블랑켓과 펄라이트로 채워져있다. 앵커스트랩은 내조, 외조 및 코너프로텍션과 연결되어 있어 지진하중에 의한 내조의 파손을 방지하는 역할을 한다. 본 연구에서는 앵커스트랩만 고려한 단일모델과 실제 형상을 고려하여 앵커스트랩, 내조, 외조 및 코너프로텍션을 동시에 고려한 확장모델에 대해서 각각 유한요소해석을 수행하여 비교, 분석하였다. 하중조건으로는 LNG 의 유출상태 및 지진하중을 고려한 다섯 가지 경우를 고려하였고, 각 하중조건에 대한 두 모델의 Tresca 응력분포를 구하여 설계기준과 비교해 보았다.

• Nuclear Engineering and Technology
• /
• 제47권4호
• /
• pp.443-453
• /
• 2015

A hybrid safety injection tank (H-SIT) can enhance the capability of an advanced power reactor plus (APR+) during a station black out (SBO) that is accompanied by a severe accident. It may a useful alternative to an electric motor. The operations strategy of the H-SIT has to be investigated to achieve maximum utilization of its function. In this study, the master logic diagram (i.e., an analysis for identifying the differences between an H-SIT and a safety injection pump) and an accident case classification were used to determine the parameters of the H-SIT operation. The conditions that require the use of an H-SIT were determined using a decision-making process. The proper timing for using an H-SIT was also analyzed by using the Multi-dimensional Analysis of Reactor Safety (MARS) 1.3 code (Korea Atomic Energy Research Institute, Daejeon, South Korea). The operation strategy analysis indicates that a H-SIT can mitigate five types of failure: (1) failure of the safety injection pump, (2) failure of the passive auxiliary feedwater system, (3) failure of the depressurization system, (4) failure of the shutdown cooling pump (SCP), and (5) failure of the recirculation system. The results of the MARS code demonstrate that the time allowed for recovery can be extended when using an H-SIT, compared with the same situation in which an H-SIT is not used. Based on the results, the use of an H-SIT is recommended, especially after the pilot-operated safety relief valve (POSRV) is opened.