• Advances in Computational Design
• /
• 제3권1호
• /
• pp.17-34
• /
• 2018

Tall buildings are categorized as important structures because of the large number of occupants and high construction costs. The choice of competent lateral load resisting systems in tall buildings is of crucial importance. Bracing systems have long been an economic and effective method for resisting lateral loads in steel structures. However, there are some potential adverse aspects to bracing systems such as the limitations they inflict on architectural plans, uplift forces and poor performances in compression. in order to eliminate the mentioned problems and for cost optimization, in this paper, six 20-story steel buildings and frames with different types of bracing, i.e., conventional, mega-scale and buckling-restrained bracing (BRB) were analyzed. Linear and modal push-over analyses were carried out. The results pointed out that Mega-Scale Bracing (MSB) system has significant superiority over the conventional bracing type. The MSB system is 25% more economic. Some other advantages of MSB include: up to 63% less drift ratio, up to 38% better performance in lateral displacement, up to 100% stiffer stories, and about 50% smaller uplift forces. Moreover, MSB equipped with BRB attests even a better seismic behavior in the aforementioned parameters.

• 한국강구조학회 논문집
• /
• 제10권1호통권34호
• /
• pp.115-123
• /
• 1998

철골조 초고층건물의 설계에 있어서 구조물의 극한상태는 탄성해석으로는 구할 수가 없다. 현재의 비탄성 해석프로그램은 중대형에서 수행되고 있으며 사용하기가 복잡하고 그 결과값을 분석하는데 많은 노력과 시간이 요구되기 때문에 실무분야에서 비탄성 해석은 사용성에서 어려움이 있다. 본 연구에서는 잔여응력계수를 사용한 방법을 이용한 PC용 비탄성 해석법을 실제 초고층건물에 적용하여 탄성설계된 구조물에 대한 비탄성해석을 수행하였다. 또한 시스템 연성을 증대시키기 위한 구조시스템 변경방법에 관해 제시하고 있다.

• 국제초고층학회논문집
• /
• 제7권4호
• /
• pp.389-396
• /
• 2018

This paper presents a numerical investigation on the structural response of a multi-story building subjected to spreading multi-compartment fires. A recently proposed simple fire model has been used to simulate two spreading multi-compartment fire scenarios in a 10-story steel-framed office building. By assuming simple temperature rising and distribution profiles in the fire exposed structural components (steel beams, steel column and concrete slabs), finite element simulations using a three-dimensional structural model has been carried out to study the failure behavior of the whole structure in two multi-compartment fire conditions and also in a standard fire condition. The structure survived the standard fire but failed in the multi-compartment fire. Whilst more accurate fire models and heat transfer models are needed to better predict the behaviors of structures in realistic fires, the current study based on very simple models has demonstrated the importance and necessity of considering spreadingmulti-compartment fires in fire resistance design of multi-story buildings.

• Structural Engineering and Mechanics
• /
• 제40권1호
• /
• pp.65-84
• /
• 2011

In this paper a simple mathematical model for approximate static analysis of combined system of framed tube, shear core and two outrigger-belt truss structures subjected to lateral loads is presented. In the proposed methodology, framed tube is modeled as a cantilevered beam with a box section and interaction between shear core and outrigger-belt truss system with framed tube is modeled using torsional springs placed at location of outrigger-belt truss; these torsional springs act in a direction opposite to rotation generated by lateral loads. The effect of shear lag on axial deformation in flange is quadratic and in web it is a cubic function of geometry. Here the total energy of the combined system is minimized with respect to lateral deflection and rotation in plane section. Solution of the resulting equilibrium equations yields the unknown coefficients of shear lag along with the stress and displacement distributions. The results of a numerical example, 50 storey building subjected to three different types of lateral loading obtained from SAP2000 are compared to those of the proposed method and the differences are found to be reasonable. The proposed method can be used during the preliminary design stages of a tall building and can provide a better understanding of the effects of various parameters on the overall structural behavior.

• 콘크리트학회지
• /
• 제7권3호
• /
• pp.139-148
• /
• 1995

본 연구에서는 콘크리트 압축강도($f_x$)$704kg/cm^2$, 철근 항복강도 ($f_y$) $5,830kg/cm^2$인 고강도 철근 콘크리트 고층형 내력벽에 있어서 휨항복 후 축응력에 따른 비탄성 이력특성을 규명하기 위하여 60층 철근콘크리트 초고층 건축물의 최저층부 3개층을 1/4크기로 축소 모델링한 3층 1스팬의 바벨형(barbell shape)독립 내력벽 실험체 3개를 제작하여 실험을 실시하였다. 본 실험의 주요변수는 내력벽 경계부재(boundary element)에 작용된 축응력으로 본 실험 연구결과에 대한 분석으로부터 얻은 결론은 다음과 같다. 형상비 1.8인 고강도 철근콘크리트 고층형 내력벽은 경계부재에 작용된 축응력이 본 연구범위인 0.21$f_x$의 높은 축응력하에서도 수직철근의 휨항복이 선행되면서 연성적인 거동을 보였으며, 각 실험체별로 작용된 축응력에 따라 상이한 파괴양상 및 이력특성을 나타냈다. 각 실험체는 연성비(${\delta}/{\delta}_y$)13에서 15사이에 휨압축부 경계부재 및 벽체 콘크리트의 압괴와 주근 파단 등에 의해서 최종 파괴되었다. 그러나, 모든 실험체는 실험종료시까지 축력이 충분히 지지되는 휨항복형의 안정된 비탄성 이력거동을 보였다. 경계부재에 작용된 축응력이 본 연구범위인 0.21$f_x$이내인 경우, 축응력은 내력벽의 횡하중 지지능력, 초기 할선강성 및 에너지 소산능력 등을 증대시키는 것으로 나타났다. 또한, 고강도 철근콘크리트 고층형 내력벽의 휭항복 후 경계부재에 작용된 축응력에 따른 내진성능을 평가하기 위하여 연성, 에너지, 일 및 강성 등의 개념을 도입한 손상지표(damage index) 로써 각 실험체의 내진성능을 평가한 결과, 경계부재에 작용된 측응력이 본 연구범위인 0.21$f_x$이내에서 축응력이 증가됨에 따라 고강도 철근콘크리트 고층형 내력벽의 내진성능은 다소 저하되는 것으로 나타났다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문 발표회
• /
• pp.33-36
• /
• 2003

Time-dependent axial shortening in the cores and columns of tall concrete buildings requires special attention to ensure proper behavior for strength of the structure and the nonstructural clement. The effects of column shortening, both elastic and inelastic, take on added significance and need special consideration in design and construction with increased height of structures. In this paper, the compensation method of column shortening are introduced. It could be conclued that the survey is a significant factor for the compensation of column shortening.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.33-36
• /
• 2003

Time-dependent axial shortening in the cores and columns of tall concrete buildings requires special attention to ensure proper behavior for strength of the structure and the nonstructural element. The effects of column shortening, both elastic and inelastic, take on added significance and need special consideration in design and construction with increased height of structures. In this paper, the compensation method of column shortening are introduced. It could be concluded that the survey is a significant factor for the compensation of column shortening.

• 국제초고층학회논문집
• /
• 제9권4호
• /
• pp.369-376
• /
• 2020

Given the importance of quickly recovering livelihoods and economic activity after an earthquake, the seismic performance of the pile foundation is becoming more critical than before. In order to promote seismic retrofit of the pile foundations, it is necessary to develop a method for evaluating the seismic performance of the pile foundation based on the experimental data. In this paper, we focus on the building that was suffered severe damage to the pile foundation, conduct simulation analyses of the building, and report the results of evaluating the dynamic characteristics when piles are damaged using a system identification method. As a result, an analysis model that can accurately simulate the behavior of the damaged building during an earthquake was constructed, and it was shown that the system identification method could extract dynamic characteristics that may damage piles.

• 국제초고층학회논문집
• /
• 제5권1호
• /
• pp.43-50
• /
• 2016

The reinforced-concrete multi-story shear-wall structure, which can free a building from beams and columns to allow the planning of a vast room, has increasingly been used in Japan as a high-rise reinforced-concrete structure. Since this structural system concentrates the seismic force onto multi-story shear walls inside, the bending deformation of the walls may cause excessive deformation on the upper floors during an earthquake. However, it is possible to control the bending deformation to within a certain level by setting high-strength and rigid beams (outriggers) at the top of the multi-story shear walls; these outriggers restrain the bending behavior of the walls. Moreover, it is possible to achieve high energy dissipation by placing vibration control devices on the outriggers and thus restrain the bending behavior. This paper outlines the earthquake response analysis of a high-rise residential tower to demonstrate the effectiveness of the outrigger frame incorporating vibration control devices.

• Structural Engineering and Mechanics
• /
• 제20권6호
• /
• pp.695-712
• /
• 2005

Hybrid coupled shear walls in tall buildings are known as efficient structural systems to provide lateral resistance to wind and seismic loads. Multiple hybrid coupled shear walls throughout a tall building should be joined to provide additional coupling action to resist overturning moments caused by the lateral loading. This can be done using a coupling beam which connects two shear walls. In this study, experimental studies on the hybrid coupled shear wall were carried out. The main test variables were the ratios of coupling beam strength to connection strength. Finally, this paper provides background for rational design guidelines that include a design model to behave efficiently hybrid coupled shear walls.